BIG KING HORN SPEAKER ENT YCWU7B1A Transmitter User Manual BK635 T U7B7B T U7B1A T U7BM2 Introduction 1

BIG KING HORN SPEAKER ENT. CO., LTD. Transmitter BK635 T U7B7B T U7B1A T U7BM2 Introduction 1

User Manual

Download: BIG KING HORN SPEAKER ENT YCWU7B1A Transmitter User Manual BK635 T U7B7B T U7B1A T U7BM2 Introduction  1
Mirror Download [FCC.gov]BIG KING HORN SPEAKER ENT YCWU7B1A Transmitter User Manual BK635 T U7B7B T U7B1A T U7BM2 Introduction  1
Document ID815190
Application ID+3VQHue+xb5cCrx5dhA7iw==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize1.04kB (13020 bits)
Date Submitted2007-07-12 00:00:00
Date Available2007-07-12 00:00:00
Creation Date2007-06-28 16:56:22
Producing SoftwareAcrobat PDFWriter 5.0Windows NT ª©
Document Lastmod0000-00-00 00:00:00
Document TitleBK635_T-U7B7B_T-U7B1A_T-U7BM2 Introduction _1_.doc
Document CreatorBK635_T-U7B7B_T-U7B1A_T-U7BM2 Introduction (1).doc - Microsoft Word
Document Author: Administrator

BK635/T-U7B7B/T -U7B1A/T -U7BM2 Introduction
Valet Switch: This switch is used to prevent optional Automatic Last
Door Arming , Driver door Anti Hijack & Ignition Anti-Hijack of the
system during extended stopovers for service stations, maintenance,
valet parking, washing, etc.. The Valet Switch is also used, with the
ignition switch, to disarm the security system in the event the
transmitter becomes inoperable, and also transmitter code learning
process.
The LED Status Light: Informs you of 7 different conditions the system can
be in and also serves as a visual deterrent to break-ins and theft.
Transmitter Operations and Feature s
Button I -Pressing and releasing this button will arm the alarm.
Pressing and holding this button for 3 seconds when Ignition is off will
“
Panic”the alarm - sounding the siren or vehicle horn (if installed with
vehicle horn) flash the exterior lights for 30 seconds.
Button II -Press and releasing this button will disarm the alarm.
Button III –
Pressing and holding this button for 3 seconds can activate the 2 nd
channel Output.
Button IV -Pressing & hold this button for 3 seconds can operate the 3 rd channel
output.
Press this button once, then press B1 or B2 within 5 seconds can
silently arm or disarm the system.
(If this button is pressed within 5 seconds after arming the alarm, the
auxiliary sensor will be bypassed.)
Button I + Button II -Press & hold these two buttons for 3 seconds when Ignition is On can
activate the Remote Anti Hi Jack (AHJ) function.
Press B1 + B2 once when system in armed mode can active the car
finder –Siren chirp + Light flash 6 times
Arming the Security System
Active Arming The Security System Using The Transmitter:
Arm Bypass:
Shock Sensor Bypass:
Passively Arming The Security System With The Optional Last Door Arming
Feature
Arm Reminder
Security System Armed and Activated
Disarming the Security System
Automatic Rearming
The Valet Switch And Valet Mode
Valet Mode
Exiting The Valet Mode
Security Valet Override - Disarming The Security System Without The
Transmitter:
The Red LED Status Light
The LED Status Light is used as a visual indicator of what
state the security system is in at any given time.
Security System Status: The primary function of the
LED Status Light is indicated the following normal operating parameters of
the security system:
Zone Violation
Optional Pre-Warning Shock Detection Circuit
Anti Hi Jacking appearance
Ignition Anti Hijack
Driver Door Anti-Hijack
Remote Anti Hijack
Disable the AHJ mode
Programming Transmitters
2 Stage safety disarm
Programmable Features
The 10+4 Programmable Features
Default Reset
PIN code programming
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference
received, including interference that may cause undesired operation.
Notice : The changes or modifications not expressly approved by the party
responsible
for compliance could void the user’s authority to operate the equip

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Page Count                      : 3
Creator                         : BK635_T-U7B7B_T-U7B1A_T-U7BM2 Introduction (1).doc - Microsoft Word
Create Date                     : 2007:06:28 16:56:22
Title                           : BK635_T-U7B7B_T-U7B1A_T-U7BM2 Introduction _1_.doc
Author                          : Administrator
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©
EXIF Metadata provided by EXIF.tools
FCC ID Filing: VGAYCWU7B1A

Navigation menu