BIOTRONIC TECHNOLOGY 44424832303030 USB dongle User Manual

Step 3:

1:

5:

2. Press "Device Login" button to choose device types and set up

your exercise targets.

Double-click the icoach program to open it. (Fig. 01)

Thank you for purchasing LifeVisa products. This manual contains information

required to manipulate icoach program. Please follow below steps and enjoy

the workout!

After inserting USB dongle, the status column will show "USB dongle is ready".

(Fig. 03) There are 3 simple steps in the main menu. Please start from

"Personal Information Setup".

a. Press "Device Login" button in the main menu and it will go to below

5. Press "Exit" button to leave and close the program.

6. Status column shows if USB dongle is ready.

After opening the program, please insert the USB dongle into a USB port or the

status column will show "Error: Could not open COM port! Checking COM port

…" to remind you. (Fig. 02)

3. After all settings have been done, press "Run Program" button

to start your workout.

Fig. 02

Fig. 03

4:

and WHR will be calculated accordingly and automatically. After filling in all

data, press "Save" button to save the data; then press "Back" button to return

to the main menu (Fig. 03) for next step.

(i) Maximum length for name column should be within 10 characters, including

spaces.

(ii) Information of height, waist and hips should be given in centimeter (cm)

while it's kilogram (kg) for weight. (1 inch = 2.54cm; 1 lbs = 0.4536 kg)

window (Fig. 06). In the drop-down list, there are 3 types of device

to choose, including HRM (Heart Rate Transmitter), Speed and Cadence.

c. After the login has been completed, the status column will show "New device

login ok; Device ID = XXxxxx". If you have purchased all devices, please

login each by each. The device(s) that has been logged in will be shown

after "Login Device List".

Press "Clear Login Device"

button, the logged device(s)

will be clear. Login again to

continue to the next step.

This line will display which

device(s) has been logged in.

Choose Cadence in the drop-down list and enter the wheel's circumference ofAfter login has been completed, please choose the device type in the drop-

Fig. 04

Fig. 05

Fig. 07

Fig. 06

Fig. 08

Lifevisa Utrainer

Choose Speed in the drop-down list and enter the wheel's circumference of

your bike. The program will convert to diameter automatically and vice versa

(Fig. 10). Please note the unit is centimeter (cm). Then, enter your expected

speed target per hour and distance target in kilometer (km) of every workout.

Finally, press "Save".

After all settings have been done, press "Back" button to return to the main

menu for the next step.

Press "Run Program" button in the main menu and it will go to below window.

your bike. The program will convert to diameter automatically and vice versa

(Fig. 11). Please note the unit is centimeter (cm). Then, enter your expected

revolutions per minute (RPM) and distance target in kilometer of every

workout. Finally, press "Save".

down list one at a time and enter your exercise targets.

Fig. 09

Fig. 10

Fig. 11

Lifevisa Utrainer

Lifevisa Utrainer

point and end time point and press "Reload" button. Then, the data of the

period will be zoomed in a new chart. Go back to the previous chart, you

should press "Open file" button and choose the record you need.

Red line shows heart rate

data; blue line shows speed;

black line is for Cadence.

Press "Print" button to print

out the chart. For latest information, please visit LifeVisa website at www.biotronic.com.tw.

Now en

oy your workout!

Fig. 17