User Manual
User’s Manual
BPM500
http://www.bixolon.com
Rev. 1.00
-
2
-
BPM500
■ Safety Precaution
In using the present appliance, please keep the following safety regulations in order to
prevent any hazard or material damage.
WARNING
Violating following instructions can cause serious injury or death.
Do not bend the cable by force or leave it under any
heavy object.
• A damaged cable can cause a fire.
Do not plug in or unplug with your hands wet.
• You can be electrocuted.
Keep the plastic bag out of children’s reach.
• If not, a child may put the bag on his head.
Do not pull the cable to unplug.
• This can damage the cable, which is the origin of a fire or a
breakdown of the printer.
You must use only the supplied adapter.
• It is dangerous to use other adapters.
Do not plug several products in one multi-outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before usage.
• If the plug does not fit perfectly with the outlet, do not plug in.
• Be sure to use only standardized multi-outlets.
PROHIBITED
PROHIBITED
PROHIBITED
PROHIBITED PROHIBITED
ONLY SUPPLIED ADAPTER
PROHIBITED
Rev. 1.00
-
3
-
BPM500
CAUTION
Violating following instructions can cause slight wound or damage the appliance.
Do not use the printer when it is out of order. This
can cause a fire or an electrocution.
• Switch off and unplug the printer before calling your dealer.
Do not let water or other foreign objects in the
printer.
• If this happened, switch off and unplug the printer before
calling your dealer.
Use only approved accessories and do not try to
disassemble, repair or remodel it for yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
Install the printer on the stable surface.
• If the printer falls down, it can be broken and you can hurt
yourself.
Keep the desiccant out of children’s reach.
• If not, they may eat it.
If you observe a strange smoke, odor or noise from
the printer, unplug it before taking following
measures.
• Switch off the printer and unplug the set from the mains.
• After the disappearance of the smoke, call your dealer to
repair it.
TO UNPLUG
PROHIBITED
DISAS
SEMBLING
PROHIBITED
PROHIBITED
PROHIBITED
TO UNPLUG
PRINTER
PRINTER
PRINTER
PRINTER
DEALER
PRINTER
Rev. 1.00
-
4
-
BPM500
■ Warning - U.S.A
i) Class B Digital Device : Wireless Device
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications, However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ii) Changes or modifications not expressly approved by the manufacturer could void the
user's authority to operate the equipment.
iv) Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at
least 20 cm must be maintained between the antenna of this device and all persons.
■ Waste Electrical and Electric Equipment (WEEE)
This marking shown on the product or its literature, indicates that is should not
be disposed with other household wastes at the end of its working life, To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or
their local government office, for details of where and how they can take this item for
environmentally safe recycling. Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product should not be mixed with other
commercial wastes for disposal.
■ Caution
This product complies with FCC radiation exposure limits for an uncontrolled environment.
This equipment shall be installed and operated with a minimum distance of 20cm between
the user and the device.
Rev. 1.00
-
5
-
BPM500
■ Rating Label Symbol Information
DC (Direct current)
■ Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to
the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause
undesired operation of the device
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
■ Labeling
FCC ID: U5MBPM500
The proposed with FCC ID label format is to be placed on the module. If FCC ID is not visible when
the module is installed into the system, “Contains FCC ID:U5MBPM500 ” shall be placed on the
outside of final host system.
IC: 7962A-BPM500
The proposed with IC ID label format is to be placed on the module. If IC ID is not visible when the
module is installed into the system, “Contains IC : 7962A-BPM500 ” shall be placed on the outside
of final host system.
Rev. 1.00
-
6
-
BPM500
■ Feature
■ Bluetooth® v4.2
■ Bluetooth Chipset : CSR8811A12
■ Class1 (TX Power : MAX 7 dBm)
■ ARM® Cortex®-M3
■ Embedded 256KB Flash and 64KB SRAM
■ Built in Antenna
■ Support Host Interface : UART(CTS/RTS)
■ Supported Apple MFi
■ Size : 15 X 25 X 2.7(W X L X t mm)
■ RoHS Compliant
■ Application
■ Printer
■ Wireless Serial Communication
■ Introduction
1) Bluetooth Communication Specifications
Item Specifications
Frequency 2.402 ~ 2.480 GHz
Version 4.2
Module Type Class 1
2) Bluetooth Connection
BPM500(Bluetooth Module) is used mounted on the printer.
Printer can be connected to terminal devices with Bluetooth communication capability.
(PDA, PC, smartphone, tablet PC, etc.)
Rev. 1.00
-
7
-
BPM500
■ Product Information
Model Number BPM500
Product Name Bluetooth Module
Firmware Version V1.0.0
■ Antenna
The BPM500 Module has been designed to operate with the following antenna and gains. Use with other
antenna types or with these antenna types at higher gains is strictly prohibited.
Manufacturer Type of Antenna Gain (dBi) Type of Connector
BIXOLON Pattern Antenna 0.2
Permanent
integral