BLAZE AUTOMATION B-ONEHUB B.One Hub User Manual sm

Download:
Mirror Download [FCC.gov]
Document ID	3721786
Application ID	wiyfQcvOr/3Is+T6vuwh+w==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	358.38kB (4479763 bits)
Date Submitted	2018-01-21 00:00:00
Date Available	2018-01-24 00:00:00
Creation Date	2018-01-19 13:22:04
Producing Software	AFPL Ghostscript 8.53
Document Lastmod	2018-01-19 13:22:04
Document Title	User manual-sm
Document Creator	Adobe Acrobat 15.6.0
Document Author:	chartonr

E22”)
B.One Hub
Quick-Start Guide
All Things. Be OneT'V'
One App + One Hub
AllThings. Be One
BOne allows you to control latest smart devices like
motion sensors, security cameras, smoke detectors,
energy meters, climate control and also legacy
devices like old televisions or music systems using a
Simple and intuitive application or by voice
commands, BOne Hub and B.One App is all you
need to setup your smart home. You can now
control and manage most of your devices from
anywhere in the world using BOne App.
Making your home safer, smarter
and convenient has never been
simpler With the BOne Hub. You
can control the entire home from
anywhere. Make sure your
morning coffee is ready by the
time you wake up, play muSic
from your fingertips and
customize your lifestyle.
Hub The Hub acts as the key point
from where all the data flows to
your App. The Hub connects to
the App and notifies you about
' the status, actions and other
important alerts to your Smart?
phone/Tablet.
Devices Customizing the BOne Hub is
entirely up to you. Select the
El devices you want to pair and
g connect/control them through
the App.
What's Included ?
st ir
1. Hub 2. Adapter 3. USB Cable
(wo~z4ovi
4. Screwdriver 5. Wipe Cloth
Setup Requirements
Wi—Fi Network with Internet Access (2.4 GHZ
only)
Power Supply (1 OO~240\/)
Getting Started
Step 1: Download B.One App
Download and Install the B‘One Application
on your compatible Tablet/ Mobile device
from the App Store / Play Store
BOne App is compatible with: iOS 8 and
above, Android OS version 5.0 and above.
Open the B.One Application and follow the
setup instructions
Free App Available
TM
L”
B Z ' App Store
0 ~ eagle-play
Step 2: Power ON
ll
0‘
Use sllde swltch to turn ON your BOne l—lub.
Step 3: Power Connection
Connect Hub— BOne hub works on Wl—Fi(2.4
GHZ) technology and can be placed anywhere in
the house as long as it is within 30 feet of your
home router. Once plugged ln please look for
BOne logo on top to turn solld redo
usB Cable
Step 4: Follow B.One App Setup
Process
Open Application and follow oane steps to
finish setting up your BOne Hubs
cu.” GARNER ‘é‘ 7:00 PM
All Things. Be One w
Troubleshooting
During the course of operating your BOne
Hub, ifyou make an error and would like to
restart your Hub, simply pull the charger
out, plug it back in after five seconds. This
would restart your Hub,
USB Cable
Technical Specifications
AC/DC Adapter:
Input: 100 ~ 240V, 50/60Hz, O.25/—\ l\/la><
Output: 5V, l.2A
For a list of compatible products, please
visit the ’Syncs With'TM section ofthe
website: http://www.bl hubcorn
Protocols Supported
B.One Elite HUB supports:
WifFi(2.--
Bluetoot
GHz), ZIGBEE, Z—Wave Plus, IR,
h Smart.
B.One HUB supports:
Wi—Fi(2.fl GHZ), Z—Wave Plus, lR,
B.One Hub Status Indicator
The B.One logo on the Hub indicates to you
the current status ofthe Hub.
Solid Red
Solid Purple
MEANING
Ready to Connect
Connected to Home Network
Successfully
Blinking Red Ready to connect/ Unable to
Connect to Home Network
Blinking Purple Unable to Connect to Internet
Long Blin
Long Blin
king Red Security Sensor Alert
king Purple Device/ Sensor Status Change
For any further technical support please contact:
support@blazeautomation.com
Safety Instructions
Disconnect the power adapter and other connected
peripherals
ifany of the foIIOWing conditions exist:
— The power cord or connector is damaged or frayed.
7 You want to clean the Hub.
— The Hub or attached cables are exposed to rain,
water/fluids, or excessive moisture.
— The Hub power adapter is damaged or has been dropped
and you suspect it needs to be serviced
- Read, Keep, and follow these instructions,
— Heed all warnings.
7 Do not use this product near water or expose the product
to dripping registers, stoves or other apparatus (including
amplifiers) that produce heat.
— Only use attachments and accessories specified by the
manufacturer.
Disclaimer
Some content and services accessible through this device
belong to third parties and are protected by copyright, patent,
trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal
noncommercial use. You may not use content or services in a
manner that has not been authorized by the content owner or
service provider.
Without limiting the foregOing, unless expressly authorized by
the applicable content owner or service provider, you may not
modify, copy, republish, upload, post, transmit, translate, sell,
create derivative works, explOit, or distribute in any manner or
medium any content or services displayed through this device.
WARNlNG No user—serViceable parts in5|de Refer all serviCing to
qualified serVice personnel
lMPORTANT CONSUMER lNFORileTlON: Please read before activating
or usmg the deVice,
WARNlNG This product contains chemicals cancer and reproductive
toxicity For more information, Please viSit wwwbl hub com m
Certifications
Hereby, Blaze Automation inc. declares that this
product is in compliance with the essential
requirements and other relevant provisions of
Directive i999/5/EC, The original Declaration of
Conformity may be found at vvvvwbihubcom.
Certified under FCC lD: 2AHV7—BfONEl—lUB and lC‘
2179BfBll—lUB
FCC compliance statements
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference received,
including
Interference that may cause undesired operation
FCC Caution!!!
-Any changes or modifications not expressly
approved by the party
Qesponsible for compliance could void the user‘s
authority to operate this
Equipment
- This equipment should be installed and operated
with minimum distance
20 cm between the radiator & your body.
3art i SB compliance statements for digital devrces:
OTE: This equipment has been tested and found to
comply with the limits
'or a Class B digital device, pursuant to part 15 ofthe
ZCC Rules. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation.
"his equipment generates, uses and can radiate radio
requency energy
And, if not installed and used in accordance with the
instructions, may
Cause harmful interference to radio communications.
—lovvever, there is no
Guarantee that interference will not occur in a
particular installation.
fthis equipment does cause harmful interference to
adio or televrsion
Reception, which can be determined by turning the
equipment offand on,
The user is encouraged to try to correct the interfer—
ence by one or more of
The followmg measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to
Which the receiver is connected
fConsult the dealer or an experienced radio/W
technician for help.
The user is encouraged to try to correct the
interference by one or more of
The following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment
and receiver.
—Connect the equipment into an outlet on a circuit
different from that to
Which the receiver is connected
fConsult the dealer or an experienced radio/TV
technician for help.
This Class B digital apparatus complies with Canadian
iCES—OOS. This device complies with Industry Canada
license—exempt RSS standard(s).
Operation is subject to the following two conditions
i) This device may not cause interference, and
2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Le present appareil est conforme aux CNR d‘Industrie
Canada applicables aux appareils radio exempts de
licence. L‘exploitation est autorisée aux deux
conditions suivantes:
(i) l‘appareil ne doit pas produire de brouillage, et
(2) l‘utilisateur de l‘appareil doit accepter tout
brouillageadioélectrique subi, meme si Ie brouillage
est susceptible d‘en compromettre Ie fonctionnement
This equipment complies with radio frequency
exposure limits set forth by industry Canada for an
uncontrolled Environment.
This equipment should be installed and operated with
minimum distance 20 cm between the device and the
user or bystanders. Cetéquipementestconforme au><
imitesd‘exposition au>< radiofréquencesdéfinies par
ndustrie Canada pourunenvironnement non controlé.
Cet équipementdoitétreinstalle et utilise avec un
minimum de 20 cm dedistance entre le dispositif et
‘utilisateurou des tiers.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
SED iCES—OO3. These limits are designed to provide
reasonable protection against harmful interference in
a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not
'nstalled and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, thereis no guarantee that
interference will not occur in a particular installation. if
his equipment does cause harmful interference to
radio or television reception n, which can be
determined by turning the equipment offand on,
he user is encouraged to try to correct the
interference by one or more of the following
measures:
7 Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and
receiver.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
Cetéquipement a éteteste etjugeconforme au>< limites
de Classe B pour unappareilnumérique, en vertu de
l’article i5 de la réglementation de la
FCC.Ceslimitesontétéinstaurées pour fournirune
protection raisonnable
contretouteinterférencenuisibledansune installation
résidentielle. Cetéquipementgénere, utilise et
peute’mettre de l’energieradiofréquence, S’iln’est pas
installéetutiliséconformément aux
instructions, ilpeutprovoquer des interférencessur les
communications radio. Cependant, iln’est pas
garantique des interferences ne seproduiront pas
danscertaines installations.
Si cetéquipernent cause des interferences a la
réception radio outélévisée (ce dui peutétrevérifi é en
éteignantl’appareilpuis en le remettant sous tension),
I’utilisateurpeut tenter de les résoudre en
suivantuneouplusieurs des mesures Ci—apres:
Réorienteroudéplacerl’antenneréceptrice. Augmenter
l’espace entre l’appareil et le récepteur,
Brancherl’appareil a uneprise de courant ditférente de
cellesurlaquelle Ie récepteurestbranché.
Pour obtenir de l’aide, contacter Ie vendeurouun
technician radio/télévisionexperirnenté.
REMARQUE: Toutemodification non
autoriséeexpresse’ment par le iabricantresponsable
de la conformitépeutannuler le droit de l’utilisateur
a faire fonctionner le produit.
RF Exposure:
This device can operate with AC—DC Power supply. This
device is not a handheld device, user cannot operate
this device within his/her hands. User must place this
device on a table and control it from mobile phone. So,
the seperation distance is greater than 20cm always.
Caution to the User:
Please ensure that you stay at least 20 cm away from
this device while connecting/disconnecting the Power
Plug to this Device.
One (1) Year Limited Warranty
Blaze Automation, inc. warrants this product (the ”B.One Hub”)
against defects in materials and/or workmanship under
normal use for a period of ONE (i) YEAR from the date of
purchase by the original purchaser (”Warranty Period”). if a
defect arises and a valid claim is received within the Warranty
Period, then as your sole remedy (and Blaze Automation‘s sole
liability), Blaze Automation will at its option either 1) repair the
defect at no charge, using new or refurbished replacement
parts, or 2) replace the Product with a new Product that is
functionally equivalent to the original, in each case Within 30
days following receipt ofthe returned Product. A replacement
product or part assumes the remaining warranty of the
original Product. When a Product or part is exchanged, any
replacement item becomes your property and the replaced
Product or part becomes Blaze Automation’s property.
Obtaining Service: To obtain warranty service, viSit
wwwblhubcom to speak with a service agent or open a
service request, Please be prepared to describe the product
that needs service and the nature ofthe problem
A purchase receipt is required, The Product must be insured,
and shipped freight prepaid and securely packaged. You must
contact support for a Return Material Authorization Number
(“RMA Number”) before shipping any product, and include the
RMA Number, a copy of your purchase receipt and a
description of the problem you are experienCing with the
Product, Any claim under this Limited Warranty must be
submitted to Blaze Automation Inc, before the end of the
Warranty Period.
Exclusions: This warranty does not apply to: a) damage caused
by failure to follow instructions relating to the Product use or
the installation of components; b) damage caused by accident,
abuse, misuse, transport, neglect, fire, floods, earthquake or
other external causes; c) damage caused by serwce performed
by anyone who is not an authorized representative of Blaze
Automation; d) accessories used in conjunction with a covered
Product; e) a Product or part that has been modified to alter
functionality or capability, f) items intended to be periodically
replaced by the purchaser during the normal life of the
Product, including, without limitation, batteries, bulbs or
cables; g) a Product that is used commercially or for a
commercial purpose, in each case as determined by Blaze
Automation inc.
EXCEPT FOR BODILYIN
LIABLE FOR (I) A
SUBSTITUTE PRODUCT
FOR THE PRODUCT, IN
USE OF OR INABILTY ’
ANY BREACH OF THIS
ADVISED OF THE POSS
NOT ALLOW THE EXC
CONSEQUENTIAL
EXCLUSIONS MAY
APPLICABLE LAW,
STATUTORY OR MP
EACH CASE WHETHER
WARRANTY, EVEN IF
EUSION OR LIMITATIO
DAMAGES. SO THE ABOVE LI
OTAPPLYTOYOU.TOTHE
BLAZE AUTOMATION DISCLAIMS A
JED WARRANTIES, I
LIMITATION, WARRANTIES OF MERCHANTAB
PARTICULAR PURP
LATENT DEFECTS. F B
DISCLAIM STATUTORY
EXTENT PERMITTED BY LAW, ALL SUCH WARRANT
OSE
OR IMPLIED WARRA
LIMITED IN DURATION '
'O THE WARRANTY PER
70 USE THIS PRODUCT, OR AR
BILITY OF SUCH DAMAGES. SO
AND WARRANTIES AGAINST
_AZE AUTOMATION INC CAN
URY, BLAZE AUTOMATION INC. S~IALL NOT BE
Y LOST PROFITS, COST OF PROCUREMENT OF
S, OR ANY INCIDENTAL OR CO
DAMAGES, OR (II) ANY AMOUNTS IN EXCESS OFTHE PU?
SEQUENTIAL
CHASE PRICE
QESULTI G FROM THE
SING OUT OF
COMPA Y HAS BEEN
E STATES DO
OF INCIDENTAL OR
ITATION AND
EXTENT PERMITTED BY
Y AND ALL
CLUDI G WITHOUT
ILITY, FT ESS FOR A
HIDDEN OR
OT LAWFULLY
TIES, TFEN TO THE
ES SHALL BE
IOD,SO ESTATES DO
NOT ALLOW LIMITATIONS ON HOW LONG A
LASTS, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU,
IMPLIED WARRANTY
This warranty gives you specific IegaI rights and you may aIso have
other rights. which vary from state to state To exercise your rights
under this warranty, pIease foIIow the Instructions above under the
heading ”Obtaining Service”, or contact BIaze Automation at BIaze
Automation, Inc, 2050, BrunSWick Plaza 4. State Highway 27, Suite #
201 , North Brunswick,
NI 08902.
BOne is a registered trademark of BIaze Automation Inc
d}
2:
Bo
ThankYbu
Member Of Consortiums:
‘fHREAD GED Qfissee‘

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Page Count                      : 18
Producer                        : AFPL Ghostscript 8.53
Create Date                     : 2018:01:19 13:22:04
Modify Date                     : 2018:01:19 13:22:04
Title                           : User manual-sm
Creator                         : Adobe Acrobat 15.6.0
Author                          : chartonr

EXIF Metadata provided by EXIF.tools