BLU BLUST70LTE Smartphone User Manual

CT Asia Smartphone

User manual

1 STUDIO 7.0 LTE Quick Guide/Guía Rápida/Guia Rápido/ Guide Rapide
2 FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
3 guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Note:
4 Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. RF Exposure Information (SAR) This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 12 mm. Although the SAR is determined at the highest certified power level, the actual SAR level of the device while operating
5 can be well below the maximum value. This is because the device is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output. The exposure standard for wireless devices employing a unit of measurement is known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6W/kg. This device is complied with SAR for general population /uncontrolled exposure limits in ANSI/IEEE C95.1-1992 and had been tested in accordance with the measurement methods and procedures specified in IEEE1528. This device has been tested and meets the FCC RF exposure guidelines when tested with the device directly contacted to the body.
6 The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID: YHLBLUST70LTE. For this device, the highest reported SAR value for usage against the head is 0.19 W/kg, for usage near the body is 1.20 W/kg. While there may be differences between the SAR levels of various phones and at various positions, they all meet the government requirements. SAR compliance for body-worn operation is based on a separation distance of 12 mm between the unit and the human body. Carry this device at least 12 mm away from your body to
7 ensure RF exposure level compliant or lower to the reported level. To support body-worn operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 12 mm between this device and your body. RF exposure compliance with any body-worn accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided. IC Notice This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and
8 (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada IC: 11492A-ST70LTE
9 IC Radiation Exposure Statement This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 1.2 cm between the radiator and your body. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme aux limites d'exposition DAS incontrôlée pour la population générale de la norme CNR-102 d'Industrie Canada et a été testé en conformité avec les méthodes de mesure et procédures spécifiées dans IEEE 1528 et IEC 62209.
10 Cet appareil doit être installé et utilisé avec une distance minimale de 1.2 cm entre l’émetteur et votre corps. Cet appareil et sa ou ses antennes ne doivent pas être co-localisés ou fonctionner en conjonction avec tout autre antenne ou transmetteur.
11  For instructions or any questions pertaining to phablet usage, please click on the BLU Help icon on the home screen of the phablet. Also included in BLU Help is a product registration link and technical support. You may also access the BLU help page by visiting the following address: manuals.bluproducts.com  Para obtener instrucciones o preguntas relacionadas con el uso de la phableta, por favor haga clic en el icono de BLU Help en la pantalla principal de la phableta. También se incluye en BLU Help un enlace para registro del producto y soporte técnico. Usted también puede acceder la página de BLU Help visitando la siguiente dirección: manuals.bluproducts.com  Para obter instruções ou perguntas relacionadas ao uso do phableta, por favor, clique no ícone BLU Help na tela principal do phableta. Também incluído no BLU Help um link para registrar o produto e suporte técnico. Você também pode acessar a página de BLU Help visitando o seguinte endereço: manuals.bluproducts.com  Pour des instructions ou pour toutes questions sur l'utilisation du phablette veuillez cliquer sur l'icône Aide BLU sur l'écran d'accueil du phablette. L'Aide BLU comprend un lien pour enregistrer le produit et pour le soutien technique. Vous pouvez aussi accéder à la page aide BLU en visitant l'adresse suivante: manuals.bluproducts.com ATTENTION
12 SAFETY INFORMATION Transportation Safety Please observe all transportation laws and regulations. PLEASE DRIVE RESPONSIBLY - DO NOT TEXT & DRIVE Hospital Safety Please follow hospital rules and limitations. Please turn off your phablet when near medical instruments. Airport Safety Remember to follow all airport and flight safety regulations. Water Hazard Your phablet is not waterproof. Keep your phablet away from water or liquid to avoid damage. Emergency Calls Make sure your phablet is switched on and in a service area. In home screen, tap the dial key and dial the emergency number. Battery Usage For better performance and longer battery life, it is recommended that you charge the battery fully before using the phablet for the first time and that you initially complete two to three charge cycles. BLU_S0010UU_V03
13 KEY FUNCTIONS Power Back Home Recent Apps Front Camera Speaker Volume
14 Rear Camera
15 INTRODUCTION Installation of the SIM Card Warning: Please keep the SIM card out of the reach of children. The SIM card and its contact are easily damaged due to scratching or bending. Please use caution when carrying, installing, or taking out the SIM card. Note: Please contact your cellular phablet service provider directly to obtain your SIM card. To insert SIM card: 1. Remove the SIM tray. Insert the SIM card. 2. Insert the SD card (For additional storage capacity). 3. Insert the SIM tray and power on the phablet. SIM Slot Memory Card Slot
16 When you initially power on your phablet, there will be a series of steps to set up basic features. INSERT SIM Insert your SIM card so the phablet can register to the network. SELECT LANGUAGE While on the Welcome screen, please scroll to select your language. SELECT WI-FI This process allows the device to connect to the internet. Click on the desired Wi-Fi network that the device will be connecting to. Please note that any unsecured Wi-Fi networks can be connected to directly and any secured Wi-Fi networks require a password for credentials prior to connection. It is recommended that you connect to a Wi-Fi network to check for software updates prior to startup. ADD YOUR ACCOUNT Sign in to your GoogleTM account in order to keep accounts streamlined with Google services. Your Gmail account will be used for some Google programs which include: Google PlayTM Store, Google DriveTM, Google+TM and Google WalletTM. If you do not have a Google account, click to create a new account. In this step you can also setup payment info if desired. Click next to continue. RESTORE APPS & DATA You can restore your previous applications and data that have been backed up from another device. You may also setup the phablet as a new device. Click next to continue. GOOGLE SERVICES Click to add or remove Google services which include Backup, Location Service, and Google NowTM. DISCLAIMER: Android, Google, Google Play and other marks are trademarks of Google Inc.
17 INFORMACIÓ N DE SEGURIDAD Seguridad de Transporte Por favor siga todas las leyes y regulaciones de transporte. MANEJE RESPONSABLEMENTE - NO USE MENSAJERIA DE TEXTO CUANDO CONDUCIENDO Seguridad de Hospitales Por favor siga todas las leyes y regulaciones de hospital Por favor, apague su phableta cuando cerca de instrumentos médicos. Seguridad de Aeropuertos Por favor, siga todas las normas de seguridad de vuelo Prueba de Agua La phableta no es impermeable. Manténgalo alejado de agua o líquidos para evitar daño. Llamadas de Emergencia SOS Asegúrese de que su phableta está encendido y en un área de servicio. En la pantalla de inicio, pulse la tecla de marcación y marque el número de emergencia. Uso de batería Para mejorar el rendimiento y la vida útil de la batería, se recomienda que cargue la batería totalmente antes de utilizar la phableta por primera vez. El rendimiento óptimo de una batería nueva se obtiene generalmente después de dos o tres ciclos de carga completos.
18 FUNCIONES Volumen Retroceder Inicio Apps Recientes Encender Cámara Frontal Altoparlante
19 Cámara Trasera
20 INDRODUCCIÓ N Instalación de la Tarjeta SIM Advertencia: Mantenga la tarjeta SIM fuera del alcance de los niños. El contacto de la tarjeta SIM se daña fácilmente debido al roce o flexión. Por favor tenga cuidado al transportar o instalar la tarjeta SIM. Nota: Por favor comuníquense con el proveedor de servicio directamente para obtener su tarjeta SIM. Para insertar la tarjeta SIM: 1. Retire la bandeja de SIM. Inserte la tarjeta SIM. 2. Inserte la tarjeta de memoria (Para capacidad adicional). 3. Inserte la bandeja de SIM y encienda el phablet. Ranura de Tarjeta de Memoria Ranura de Tarjeta SIM
21 Cuando inicialmente se enciende la phableta, habrá una serie de configuraciones básicas. INSERTAR SIM Inserte su tarjeta SIM para que la phableta pueda registrarse a la red. SELECCIONAR IDIOMA En la pantalla de bienvenida, por favor, haga clic y desplace para elegir su selección de idioma. SELECCIONAR WI-FI Este paso permite que el dispositivo se conecte a la red de Wi-FI. Haga clic en la red Wi-Fi que desee que el dispositivo se conecte. Por favor, tenga en cuenta que todas las redes sin seguridad pueden conectarse directamente y cualquiera de las redes protegidas requieren una contraseña antes de conexión. AGREGAR LA CUENTA Ingrese a su cuenta de GoogleTM para llevar una contabilidad simplificada con los servicios de Google. Tu cuenta de Gmail se utilizará para algunos programas de Google que incluyen: Google PlayTM Store, Google DriveTM,Google+TM y Google WalletTM. Si usted no tiene una cuenta de Google, haga clic para crear una cuenta nueva. En este paso también se puede configurar información de pago, si lo desea. RESTABLECER APLICACIONES Y DATOS Puede restaurar sus aplicaciones y datos que han sido copiados de otros dispositivos anteriores. Usted puede también configurar el phablet como un dispositivo nuevo. Haga clic en siguiente para continuar. SERVICIOS DE GOOGLE Haga clic para agregar o quitar servicios de Google que incluyen copia de seguridad, servicio de ubicación, y Google NowTM. DESCARGO: Android, Google, Google Play y otras marcas son marcas registradas de Google Inc.
22 INFORMAÇ Õ ES DE SEGURANÇ A Segurança no Transporte Observe todas as leis e regulamentos sobre transporte DIRIJA RESPONSAVELMENTE - NÃ O DIGITE DIRIGINDO Segurança em Hospitais Sigas as regras e limitações em hospitais Desligue seu phableta perto de instrumentos médicos. Segurança em Aeroportos Lembre-se de seguir todas as regras de segurança de vôo e em aeroportos. Risco de Á gua Seu phableta não é à prova d’água. Mantenha-o afastado de água ou líquidos. Ligações de Emergência Certifique-se de que o celular esteja ligado e em área de cobertura. Na tela inicial, toque na tecla de chamada e digite o número de emergência. Uso de Bateria Para melhorar o desempenho e aumentar a vida da bateria, recomenda-se carregar a bateria completamente antes de usar o phableta pela primeira vez.
23 FUNÇ Ã O Alto-falante Volume Ligar Voltar Início Apps Recentes Câmera Frontal
24 Câmera Traseira
25 INTRODUÇ Ã O Instalação do Cartão SIM (Chip) Atenção: Mantenha o cartão SIM fora do alcance de crianças. O cartão SIM e seus contatos são facilmente danificados por arranhões ou empenos. Tenha cuidado ao transportar, instalar ou retirar o cartão SIM. Nota: Faça contato com o provedor de serviços do seu celular diretamente, para obter o cartão SIM. Para inserir o cartão SIM: 1. Retire a bandeja de SIM. Insira o cartão SIM. 2. Insira o cartão SD. (Para Capacidade de Armazenagem Adicional) 3. Recoloque a bandeja de SIM e ligue o phableta. Entrada de SIM Entrada de Cartão de Memória
26 Quando você iniciar o phableta, haverá uma série de etapas para configurar como recursos básicos e necessários para o seu phableta. INSERÇ Ã O SIM Insira o seu cartão SIM para o phableta para se registar na rede. SELECIONE O IDIOMA Na tela de boas-vindas, por favor, clique no botão de linguagem e escolha seu idioma. SELECIONAR WI-FI Esta etapa permite que o aparelho se conecte à rede Wi-Fi. Clique na rede Wi-Fi que você deseja para o aparelho conectar-se. Por favor, note que todas as redes não seguras podem ser conectadas diretamente e qualquer uma das redes protegidas exige uma senha para credenciais antes de conectar. ADICIONE SUA CONTA Faça login na sua conta do GoogleTM para manter uma contabilidade simplificada com serviços do Google. Sua conta do Gmail é usado para alguns programas que incluem Google: Google PlayTM Store, Google DriveTM, Google+TM e Google WalletTM. Se você não tiver uma Conta do Google, clique em criar uma nova conta. Nesta etapa, você também pode configurar as informações de pagamento. RECUPERE SEUS APPS E DADOS Você pode restaurar seus aplicativos e dados que foram copiados de outros dispositivos anteriores. Você também pode definir o phableta como um novo dispositivo. Clique em avançar para continuar. SERVIÇ OS DO GOOGLE Clique para adicionar ou remover serviços do Google, incluindo backup, serviço de localização, e Google NowTM. DECLARAÇÃO: Android, Google, Google Play e outras marcas são marcas comerciais da Google Inc.
27 RENSEIGNEMENTS RELATIFS À LA SÉ CURITÉ Sécurité au volant Veuillez observer toutes les lois et règles de transport. VEUILLEZ CONDUIRE DE MANIÈRE RESPONSABLE - NE JAMAIS TEXTER ET CONDUIRE. Sécurité dans les hôpitaux Veuillez suivre les règles et limitations des hôpitaux. Veuillez éteindre votre phablette si vous êtes près d'appareils médicaux. Sécurité aéroportuaire N'oubliez pas de suivre les règles de sécurité des aéroports et de vol. Risque lié à l'eau Votre phablette n'est pas à l'épreuve de l'eau. Garder votre phablette à l'abri de l'eau ou de tout autre liquide pour éviter des dommages. Appels d'urgence S'assurer que votre phablette est allumé dans une zone de service. Dans l'écran d'accueil, toucher sur la touche appel et composer le numéro d'urgence. Utilisation de la batterie Pour une meilleure autonomie de la batterie, il est recommandé de charger la batterie complètement avant d'utiliser le phablette pour la première fois et de compléter deux à trois cycles de recharge.
28 FONCTION DES TOUCHES Volume Marche/Arrêt Reculer Accueil Appareil photo avant Haut-parleur Applications récentes
29 Appareil photo arrière
30 INTRODUCTION Installation de la carte SIM Avertissement : Veuillez garder la carte SIM hors de la portée des enfants. La carte SIM et les contacts sont facilement endommagés par une déformation ou des rayures. Veuillez faire attention lors du transport, de l'installation ou du retrait de la carte SIM. Note: Veuillez communiquer directement avec votre fournisseur de service cellulaire pour obtenir votre carte SIM. Pour insérer la carte SIM: 1. Retirer le plateau de la carte SIM. Insérer la carte SIM. 2. Insérer la carte SD (pour une plus grande capacité de stockage). 3. Insérer le plateau de la carte SIM et allumer le phablette. Fente pour la carte SIM Fente de la carte mémoire
31 Lorsque vous allumez votre phablette pour la première fois, il y aura une série d'étapes à suivre pour régler les fonctionnalités de base. INSÉRER LA SIM Insérer votre carte SIM pour que le phablette puisse s'inscrire au réseau. CHOISIR LA LANGUE Pendant que vous êtes sur l'écran de bienvenue, défilez pour sélectionner votre langue. SÉLECTION WI-FI Ce processus permet à l'appareil de se connecter à l'internet. Cliquer sur le réseau Wi-Fi désiré auquel l'appareil sera connecté. Veuillez noter que les réseaux non sécurisés peuvent être connectés directement - les réseaux sécurisés nécessitent un mot de passe comme justificatif d'identité avant d'établir la connexion. Nous vous recommandons d'être connecté à un réseau Wi-Fi pour vérifier les mises à jour disponibles avant le démarrage. AJOUTER VOTRE COMPTE Connectez-vous à votre compte GoogleTM afin de synchroniser vos comptes avec les services de Google. Votre compte Gmail sera utilisé pour certains programmes Google tels que : Google PlayTM Store, Google DriveTM, Google+TM et Google WalletTM. Si vous n'avez pas de compte Google, cliquez pour créer un nouveau compte. À cette étape vous pouvez aussi configurer vos données de paiement si vous le désirez. Cliquez sur Suivant pour continuer. RESTAURATION DES DONNÉES ET APPLICATIONS Vous pouvez restaurer vos données et applications qui ont été sauvegardées sur un autre appareil. Vous pouvez aussi configurer le phablette tel qu'un nouvel appareil. Cliquez sur Suivant pour continuer
32 SERVICES GOOGLE Cliquez pour ajouter ou retirer les services Google qui comprennent, Backup, Location, et Google NowTM. AVERTISSEMENT: Android, Google, Google Play et autres marques sont des marques déposées de Google Inc.

Navigation menu