BLUE SOLIDS TECHNOLOGY BSTMOUSE Wireless mouse User Manual manual
SHENZHEN BLUE SOLIDS TECHNOLOGY CO.,LTD Wireless mouse manual
Users Manual
Manual
0DQXIDFWXUHU6KHQ]KHQ'LQJORQJVKHQJ3ODVWLF0RXOG&R/7'
$GGUHVV5,)8/2$'%$,6+,;,$($67)8<21*72:1%$2$1',675,&7
6+(1=+(1&+,1$
0RGHO˖%67%67%670%67%670%670%670
%670%67%67
ŁPackage Contents
2.4GWireless mouse and keyboard
2*1.5V AAA battery
Instructions / certificate
Note: If you find discrepancies package, please return the dealer
łInstallation Steps:
Installation Receiver
1.If it is a laptop, you can plug the receiver directly in the port USB.
2.If a desktop computer, we recommend that you extend the line through the USB, the
receiver plugged into a countertop, so will reduce the impact of the external
environment.
3.Installation mouse and keyboard
Open the mouse and keyboard at the bottom of the battery cover, press the battery
positive and negative inner recesses into the battery, one AAA battery into the mouse, ,
two AAA batteries into the keyboard and after slide the power switch to ON , at this
time LED red light, replace the battery cover, you can use
T
rade:BST
ŃRemarks/Troubleshooting
If the mouse and keyboard does not work, you should use the following methods to
troubleshoot
1ǃCheck that the power switch is turned on
2ǃDetermine whether to put on the positive and negative battery or battery has power
3ǃCheck that the receiver is properly plugged into the computer USB port
4ǃAfter determining the receiver into, whether it is the computer to recognize
ńWhen the wireless mouse moves slowly or failure, we recommend the following
methods to exclude
1ǃWireless mouse in use for some time to find or cannot properly use the mouse to
lose control, it may be insufficient battery power, replace the battery
2ǃPlease try to stay away from strong radiation, strong interference or regional
settings, such as nuclear reactors, WIFI, Bluetooth, microwave ovens, cooker etc.
3ǃIf the operation of the mouse on the metal surface, for example: iron, aluminum,
copper, etc., will produce a radio transmission barrier, and the reaction time delay or
lead Keyboard Keyboard, Mouse temporary failure
4ǃUse a dry cotton cleaning mouse
CAUTION : RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN
INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE
INSTRUCTIONS.
The EUT In accordance with the R&TTE directive 1999/5/EC.
Donÿt placing the product on more than 25 ć or below -5 ć environment.
FCC Certification Requirements
Caution: Any changes or modifications in construction of this device which are not
expressly approved by the party responsible for compliance could void the user's authority
to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-- Consult the dealer or an experienced radio/TV technician for help.