BLUECOOLS DIGITAL IAHP86B Bluetooth headphone User Manual
BLUECOOLS DIGITAL (HK) CO., LIMITED Bluetooth headphone
User Manual
FCC Warnings
Warning: Changes or modications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
additional Warnings and PreCautions
• To avoid hearing damage, make sure that the volume on your music player is turned down before
connecting your headphones. After placing headphones in/on your ears, gradually turn up the volume
until you reach a comfortable listening level.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed
of according to state and local guidelines. They should never be disposed of in normal household
waste, and they should never be incinerated, as they might explode. Contact your local government for
disposal or recycling practices in your area.
• WARNING: This product may contain chemicals known to the State of California to cause birth defects,
or other reproductive harm (California Prop 65). Wash hands after handling.
• This product meets and complies with all Federal regulations.
Orientation
Wireless Noise Canceling Headphones
User’s Guide for Model IAHP86B
Includes
• Micro-USBtoUSBchargingcable
• 3.5mmaudiocable
• Hardcarryingcase
Features
• SupportsBluetooth
• Wirelessrange:33feet
• Built-inmicrophone
• Micro-USBportforbatteryrecharge
• Auxin(3.5mmaudioinput)
• Foldingadjustableheadband
• On-earcontrols
• DCbatterypower:built-in
rechargeablelithiumionbattery
• Batterylife:approx.8hours
Noise Canceling
Indicator Light
Noise Canceling
ON/OFF
RIGHT EARCUP CONTROLS
Power/Pair/Play/Pause/Speakerphone
Press and hold for 4 sec. to turn the unit on and begin pairing.
Press and hold to turn OFF.
Volume +/-
Press to adjust volume level.
Aux In
Bluetooth
LED Indicator
Mic
Micro-USB
Charging Port
LEFT EARCUP CONTROLS
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirement.
The device can be used in portable exposure condition without restriction.
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
TodownloadthisUser’sGuideinEnglish,Spanish,orFrench,ortogetanswerstofrequentlyaskedquestions,visit
thesupportsectionat:www.iLiveElectronics.com
ParadescargaresteManualdelUsuarioeninglés,españolyfrancés,oparaobtenerrespuestasapreguntas
frecuentes,visitelaseccióndeapoyoen:www.iLiveElectronics.com
Pourtéléchargerceguidedel’utilisateurenanglais,espagnoloufrançais,oupourobtenirdesréponsesàdes
questionsfréquemmentposées,consultezlarubriqued’assistancesur:www.iLiveElectronics.com
ForWarrantyInformationofthisUser’sGuide,gotowww.iLiveElectronics.com
Customer Service:1-888-999-4215| Email Support:prodinfo@dpiinc.com| Email Parts:partsinfo@dpiinc.com
Copyright©2016DigitalProductsInternational(DPI,Inc.)Allothertrademarksappearinghereinaretheproperty
oftheirrespectiveowners.Specicationsaresubjecttochangewithoutnotice.
International Support
Charging the Battery
Requires a Micro-USB to USB cable (included).
1. UsingaMicro-USBtoUSBcable(included),connectthelargerUSB plug
totheUSB portofapoweredoncomputerorUSBpoweradaptor(not
included).
2. ConnectthesmallerMicro-USB plugintotheMicro-USB portontheunit.
Theunitwillnowcharge.
Aux In
AuxInmodewillfunctioneveniftheheadphonesarenotpoweredON.
Toconservebatterypower,keepthempoweredOFFwhenusingAuxIn.
Requires a 3.5mm audio cable (included).
1. Connecta3.5mmaudiocabletotheAux Inontheunitandthe
audio outputonanaudiodevice.
2. Usethecontrolsontheconnecteddevicetoselectandplayaudio.
Noise Canceling
TheNoiseCancelingfeaturewillelectronicallymutebackgroundnoise.Itcanbe
usedwiththeBluetoothorAuxInmodestoenhancethequalityofanymusicor
audiothatisplayingthroughtheheadphones.
NoiseCancelingmodewillfunctioneveniftheheadphonesarenotpoweredON.
Toconservebatterypower,itisrecommendedtopowertheheadphonesOFFif
youwanttousetheNoiseCancelingfeaturewithoutplayingaudio.
Bluetooth Wireless Audio
Pairing to a Device and Playing Audio
Afterinitialpairing,theunitwillstaypairedunlessunpairedmanuallybytheuser,
orerasedduetoaresetofthedevice.Ifyourdeviceshouldbecomeunpairedor
younditisunabletoconnect,repeatthestepslistedhere.
1. PressandholdthePower/Pair buttonontheunitforapproximately
4 secondstopowertheunitonandbeginpairing.Thepairing indicator
willbeginashingredandblue.
When pairing, remain within 3 feet of the unit.
2. UsingthecontrolsonyourBluetoothdevice,selecttheIAHP86inyour
Bluetoothsettings/devicemenu.Ifyourdevicerequestsapassword,enter
thedefaultpassword 0 0 0 0 .
Refer to the user’s manual for your specic device for instructions on pairing
and connecting Bluetooth devices.
3. Whensuccessfullypaired,thepairing indicator willstartashingblueand
anaudiblechimewillsoundthroughtheunit.Audioplayedthroughthe
connectedBluetoothdevicewillnowbeheardthroughtheheadphones.
4. Usethecontrolsontheconnecteddevicetoselectandbeginplayingaudio.
5. Toplayorpauseaudio,usethecontrolsontheconnectedBluetoothdevice,
orpressthePlay/Pause buttonontheheadphones.
Using the Speakerphone
1. Whenacallisreceived,aringtonewillsoundthroughtheunit.
2. Pressthe buttontoacceptthecall,oracceptthecallusingthe
controlsontheconnectedphone.
3. Theincomingcallreceivedthroughthedevicewillnowbeheardthrough
theheadphones.
4. Toendthecall,pressthe buttonorendthecallusingthecontrolson
theconnecteddevice.
STATUS INDICATOR
PowerOn Flashingbluelight
Charging Solidredlight
ChargingComplete Solidbluelight
Pairing Flashingredandbluelights
PairingComplete Flashingbluelight