BOO YOUNG INDUSTRY KWA-01 Kabis Wireless Charger User Manual Kabis Fast Wireless Charger
BOO YOUNG INDUSTRY CO. Kabis Wireless Charger Kabis Fast Wireless Charger
User manual
Kabis Wireless Charger
[ for Santafe DM (The Prime) ]
< KWA-01 >
( Wireless Electronic Device )
●This product is designed for Hyundai Automobile Santafe DM (The Prime) only.
●Qi certified by WPC to support wireless charging on all Qi-enabled devices.
●Read these simple guidelines carefully. Not following them may be dangerous or illegal.
Keys and parts
Qi certified Mark
Position Guide
No Smart-Key Mark No Coins Mark Power LED
(Red)
Charging LED
①Charging : Blue
②Charging complete : Green
③Charging error : Blue blink
Indicator LED
(Sky Blue)
※Mark Details
▣Qi Certified Mark : This product is Qi certified by WPC (Wireless Power Consortium)
▣No Smart-Key Mark : Do not put Smart-Key on the Charging Area, it may cause any damages.
▣No Coins Mark : Do not put any coins on the Charging Area, it may cause any damages.
1
User Guide
1. Place this product in the bottom compartment of the air conditioner as shown below
and connect it to the vehicle power (DC12V).
2. When the Wireless Charging Pad is connected to the electronic socket, Power LED (Red)
flashes, and Charging LED (Blue and Green) & Indicator LED (Sky Blue) flashes turning
On and Off.
3. Place your smartphone on the center of Wireless Charging Pad. Charging a smartphone
with the Wireless Charging Pad in an area with a weak signal may cause a significant
drop in reception. When the smartphone is being charged, Charging LED (Blue) flashes
on. If Charging LED keeps flicking or not charged with enough reception, refer to
Precaution section in the user guide.
4. When the smartphone is fully charged, Charging LED (Green) flashes on. If your
smartphone doesn’t support Wireless Charging completion function, it may cause no
flash Charging LED (Green)
2
Wireless Charging LED Operation (Wireless Charging Guide Solution)
Positioned a proper Wireless Charging Area Positioned a weak Wireless Charging Area
Information of Indicator LED
3
Indicator LED
1. This Product is designed with Wireless Charging Guide solution FTT (Frequency
Tracking Technology)’, which is World 1st Technology patented License.
2. When Charging a smartphone with the Wireless Charging Pad in an area with a weak
signal may cause heating issue, then it may operate lower current reception (Longer
charging time) and stop charging your phone.
3. If the Smartphone positioned in a weak signal or other caused effects on charging
efficiency, Indicator LED will flash Sky Blue. Then it requires re-position the smartphone
in a proper area.
4. This function guides appropriate Wireless Charging area in order to save energy
technology (ECO), it is also considerate user beneficial interface and Smartphone safety.
5. The indicator LED (Sky Blue) may have different performance relied on Smartphone
models. (Due to the Area of Smartphone Wireless Charging Antenna and
effectiveness of Charging current)
6. The function of indicator LED (Sky Blue) will not cause any damages or effects on
Wireless Charging operation.
1. This product supports Wireless Fast Charging solution.
2. The Wireless Fast Charging feature is compatible with below model list. (New models
will come up additionally based on Phone Manufacturers)
☆Wireless Fast Charging feature models
Galaxy Note5, Galaxy S6 Edge Plus, Galaxy S7, Galaxy S7 Edge, Galaxy S8
3. Do not put any foreign objects on the Wireless Charging Pad such as Coins, Smart-Key
or Magnetic Card…Etc., when it is being charged. It may cause any damages on your
product.
4. In case of your Smartphone temperature is high when it is being charged, the
Smartphone operates self disconnection function to stop charging. Refer to Smart
Phone Manual for more details.
5. Wireless Fast Charging feature may cause higher temperature than normal Wireless
Charging feature.
6. The function of indicator LED (Sky Blue) will not cause any damages or effects on
Wireless Charging operation.
7. The indicator LED (Sky Blue) may have different performance relied on Smartphone
models. (Due to the Area of Smartphone Wireless Charging Antenna and effectiveness
of charging current)
8. Using thick smartphone case together with Smartphone may cause not operate Wireless
Charging function and also affect to the feature of indicator LED (Sky Blue).
9. Using bigger smartphone than Position guide area may not operate Wireless Charging
function.
10.Do not put Smart-Key on the Position guide area. It may show your cluster alarmed “no
Smart-Key” signal.
11. Put any devices which may cause magnetic field damages or effects away.
12.Use the product for intended purposes only. Improper use, or use of incompatible
chargers may present a rick of fire, explosion, or other hazard. Never use a damaged
charger.
Precaution
4
NOTICE_1 : Smart Phone Self-Safety Mode Information
4
No. Smart Phone Temperature Wireless Charging Status
1Above 45.0℃ Stop Wireless Charging
2Above 41℃ By 80% level of Battery
1. ‘S’ Company Model – Smart Phone Self-Safety Mode by Temperature (updated. 2017)
Below Specification is depended on Smart Phone manufacture’ Internal Policy
2. Smart phone itself maybe activated Self-safety function by containing High Temperature
Environment or in high –level of Summer season
3. By Volume or Size or internal case structure of Smart phone, the internal temperature
would be depended in case by case.
4. With covering Thicker Smart Phone case uses Wireless Charging may occur above
phenomenon
Wireless Charging Efficiency and Charging distance are related and losing charging
efficiency causes Heating issues.
Specification
5
Categories Specification Remark
Product Name Kabis Wireless Charger
(KWA-01) ONLY Santafe DM
License No. MSIP-RMM-Kab-KWA-01 -
Certified By WPC 1.2 Support
FOD (Foreign Object Damage) feature
Operating
Frequency 137 ~ 183kHz WPC Operating Area
Input DC12V (max) / 1.25A -
Operating
Temperature -20℃~ +60℃Support Thermistor feature
Certification Certified by WPC QI
Certified by KC (with KN41)
Wireless Charging Certified (Qi)/
KC Certified / KN41 Certified
Service & Support Contact
Manufacturer / Seller BOO YOUNG (www.kabis.co.kr)
Made In Korea
Address 665 Haksan-Ri, Gasan-Myeon, Chilgok-Gun,
Gyeongsangbuk-Do, South Korea
A/ S T. 054-972-5500 / F. 054-972-7034
NOTICE_2
6
FCC Warning Statement
FCC Part 15.19
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Part 15.21
Any changes or modifications (including the antennas) to this device that are not expressly approved by
the manufacturer may void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC Radiation exposure limits set forth for an uncontrolled environment.
This device and its antenna must not be co-located or operating in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with a minimum distance of 10cm between the radiator
and your body.