BPVOICE BT-3000 Bluetooth Telephone User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1066562
Application ID	iXKlWEE5y69+MI/9HG3YsA==
Document Description	Users Manual Part Two
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	300.32kB (3753945 bits)
Date Submitted	2009-02-10 00:00:00
Date Available	2009-02-10 00:00:00
Creation Date	2009-01-23 09:51:15
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2009-01-23 09:53:30
Document Title	User Manual.pdf
Document Creator	PScript5.dll Version 5.2.2
Document Author:	daniel

13mg: BT-3000-User Manual-English
9-4. Not-interrupt time setting: press "SET/FL” key to select ”4", LCD
display off r 00-00, when the letter flicker, input the time. Not-interrupt
function is open, LCD display the time and count down until 00—00, after the
Not—interrupt is cancel, hang on or press "SPK" can exit. In the Not—interrupt
time, incoming ID not ring.
9-5. Special function select setting: press ”SET/FL” key to select "5”,
LCD will display l—F, 2-P-T, 3-DEF, then press "UP" "DOWNN" key or
directly input number key into setting. select ”1" into FLASH time setting,
press "UP" "DOWN" key select flash time. the flash time is
90,95,100,120,180,300,600,1000ms; 2 don‘t need setting, default is tone
state; select "3” into Non-theft setting, press "UP" ”DOWN" to select on/off,
”defend on" is open, "defend off" is off.
9-6. Special number setting: press "SET/FL” key to select ”6", LCD will
display l-LOC 2-OL, Select ”1" into area code set, input the number for 1-8.
Secondly don‘t need setting.
9-7. LCD brightness adjust: press ”SET/FL" key select “7”, LCD display
LCD con 3, then press "UP" "DOWN" to adjust the brightness. (1~5)
9-8.IP function setting: No need to set this function.
BPVOICE CO,,LTD, P7 http://www.BPVOICE.com/
Q?‘ ‘49
t l
13mg: BT-3000-User Manual-English
10. Put up function operation:
10-1. Incoming number inquire: usc "UP" "DOWN" key to browse, and it
will display the date and time ofall incoming number.
10-2, Incoming number dial-back: when browse the number you want dial,
use “BACK” key dial—back; if need add ”0" dial—back, you can press "BACK“
for 3 seconds.
10-3. Outgoing call inquire: press ”OUT” key once, then press "UP" or
“DOWN” to browse the outgoing call number.
10—4. Pre—dial: In on—hook state, directly input the telephone number, ifinput
error, you can use “DEL“ key delete and change it, finished input, press ”SPK“
key dial out the number.
10-5. Delete key: In on hook state, browse all the incoming and out number,
use "DEL” key delete the number you want delete Press ”DEL” for 3 second, all
number will delete; and you can use "DEL” key exit the setting too.
10-6. One-touch memory function: in the hand on state, input telephone
number or press "UP” "DOWN" key browse the number, then press "M1" "M2"
or "M3" key for second to save. LCD display “SAVE”, means it saved. When we
need the number, press "M1 ”M2” or ”M3" to pick up, the number will dial out
10-7. Two-touch function: in the hang on state, input telephone number or
press "UP” "DOWN“ key to browse the number, then press "MEMO" key for
second, LCD display "SAVE-", then input the memory location (0-9). when we
need the number, press "MEMO” key, LCD display Load, then input the number
ofmemory location, the number will dial out.
10—8. Music hold: in the pick on state, press "HOLD" key into music hold,
then put the handset back:
Pick up the handset, the music stop, automatically into handset talking.
Press "SPK" keys, the hold music stop, automatically into speaker mode.
10-9. Pause:
Press REDIAL in the process of dialing, an interval of3.6 seconds will happen
between the numbers before and after the pause. For example, if you press
consecutively 123 REDIAL 456, then a pause of3.6 seconds will occur between
123 and 456.
BPVOICE CO,,LTD, P8 http://www.BPVOICE.com/
BPJn’iJe
BT-3000-User Manual-English
10. Appearance ofBT—3000:
Q“ 15
fizii
19
ah
‘ z;
NO Name No Name No Name No Name
1 LED 9 UP 17 M 25 HandsetMIC
2 Off—Hook 10 SET/FLASH 18 DC—OUT6V 26 ANTENNA
3 WALL Button 11 HOLD 19 MEMO 27 RESET
4 lyegggflpeaker 12 OUT 20 Dial NO. 28 LINE JACK
5 SPEAKER 13 BACK 2] LEDfBT—30001 29 AUDIO JACK
6 HandsetJACK 14 M3 22 SPJ 30 AdaptorJACK
7 DELETE 15 M2 23 REDIAL
8 DOWN 16 M1 24 RECEIVER
BPVOICE CO,, LTD,
P9
http://www.BPVOICE.com/
H)”
voice
BT-3000-User Manual-English
12. Detail operation of bluetooth headset (ht—5) with Mobile:
Introduction
The Bluetooth Wireless technology makes is possible to connect any
compatible and stationary communications device without using
cable. The technology is based on a radio link that offers last and
reliable transmission of velce and data information. It does not
require a line-oi-sighi connection in order to establish communication.
Bluetooth wireless technology uses a globally available ireouency range
intended to ensure worldwide communication compatibility.
Overview:
The headset contains the following parts
cantor
sisirn it an r with”
mine if
iiuiesturiisrr
nitroaiuit
whine ttnwn
Preparing the Headset
To be able to use the Headsettogetherwith a mobile phone, you
need to have a phone with Bluetooth system,or a phone with a
Bluetooth adapter connected to it.
Charging
The Headsetcomes with a built-in rechargeable battery.The battery
is not fully charged when you buy the Headset.We recommend that
you chargingthe Headset tofull poweibefore use.
charging the battery
To BT—3000
DC-OUT 6V
Charging Method (Travel charger)
l. lnsert the AC pm of the chargerinto powersocket.
2. lnsert the DC piug oi the charger into earphone.
3. The Red LED turns on now, it will be off after it isiullccharged
(upto 2.5 hours).
4. Afterfullccharged, itcan |ast4.0hours in talking. The awaiting
time can exceeds 100 hours.
Low capacity
When the capacity of the battery is not enough, itWill
give caution, ited LED flashing.
DN&0FF of the earphone
i. ON: When the power is not on, press the main button for6
seconds, it will rings two times, then the blue LED flashes 5 times.
2. Await: To save power, it will change modefronl connection to
awaiting, the blue LED flashes every 3 minutes.
3. OFF: At awaiting mode, press the main button tor 3 seconds,
it rings 2 times, blue LED OFF, Red LED llashes 5 times.
Matching of the earphone and mobile
Add the earphone to yourrnobile's menu , your mobilewill be
distinguished rapidly by the earphone when you use it next time.
1. ln OFF status, press the main button for 9 seconds till the blue
and red LEDiIashes.
2. Please read the instruction of your mobile to start thefunctlon of
the Bluetooth and search the new device. Please be sure that the
distance between your mobile and earphone is notiar more than
5 meters.
3. Please choose”bt-5"appeared in the menu or your mobile, and
keyin "i234“.
4. The earphone is connected, blue LEDfIashes 4 times in every 3
seconds.
BPVOICE CO,, LTD,
P10
Attentions:
LVou should match your mobile with the earphone at first time
you use it.
2. Aiter you matched with other mobiles, you should match again
with the originalone.
3. ll itcan't be matched, the earphone will be OFF. You should
restart restart the steps of ”Matching oithe earphone and mobile"
until it is matched successfully.
4. lithe earphone has been connected with the mobile before,
open earphone, namelyautolinkmobile.
Adjusting volume
1. Press the " volume down" in talking can lowerthe voice.
2. Press the“ volume up” in talking can higherthe voice.
Answer St Finish talking
1. Press the main button lightly to answerthe phone.
2. lfyou answer it by mobile, the sound will be remain in the phone,
press the main button again, the sound will be in the earphone.
3. Vou can finish talking by pressing the main button.
Refusing coming calls
Press the button about 3 seconds until short tones is heard and
then release the button.
Make a call
After matched your mobilewith the earphone, you can make call
with mobile and talkWilh earphone.
Voice dialing
LYour mobile should have theiunctlon of voice dialing then the
productcan support thisiunction.
2. Please start the voice dialing function as your mobile instruction
showed.
3. when no call is in progress, press the main button, speak outthe
order stored in your mobile alter the sound of “Be".
Redialing
Press the lower button about 3 seconds, when short tones is heard,
release the button, the phone Will display the redial number.
Right or left ear
lfyou wantto wearthe Headset on your left ear, you have to change
the orientation ofthe earhook. To adjust the ear hook for leftcear use.
A}
Rightear
Putting on the Headset
Puton the Headset with the ear hook behind yourear.
Make surethe microphone is towardsyourmouth.
i N
Specification:
no. Item specilieatian
1 Power Polymer Lichl’i batterya 7V120mAh
1 Operating Current 35m
3 Carrier Frequency ZAUDMHzto 2453 5an
4 Modulation Method Grsk
Asynchronous 723 ZKbps/S‘! sths
5 Max'm‘” D“ Ra” synchronousABZ skbpsioaa QKbps
5 Transmission Power sodsm -.odtam
7 hopping 4m ~ czudBm
e OperatingTemoerature c10~50"C
g StorageTemoerature azuc7s'c
10 Tx Distance 10m (spaciaii
" Awaiting time exceeds tad hours, ltremalnsA on intaiking
http://www.BPVOICE.com/
13mg: BT-3000-User Manual-English
13. Enjoy Hand—free music with the external audio source:
13-1 . Plug the Audio Line—in cable between the audio device and BT—3000:
13—1—1. Plug the black plug ofaudio line—in ealbc to BT—3000.
13-1-2. Plut the green terminal into audio device like Mp3 Player,
13—1—3. Switching the second channel from bt—S via press its main button.
13-1-4l Enjoy hand-free music with bt-S.
13-2. Plug the Audio Line—in cable between the notebook or PC and BT—
M12
13-2-1. Plug the black plug ofaudio line-in calbe to BT-3000.
13—2—2. Plut the green and pink terminal into the earphone and MIC in of
Notebook/PC.
13—2—3. Switching the second channel from bt—S via press its main button.
13—2—4. Enjoy MSN, Skype, AOL...two ways voice with bluetooth headset
(bt-S).
14. Q &A:
14-1 , May I pair other bluetooth headset?
A: Yes, please check its PIN of headset, BT—3000 supports
0000,1234,6666, 8888 Please let you bluetooth headset device into pairing
mode to pair with BT—3000i (Due to different method to produce headset. we do
not grantee its voice quality and it could proper run with BT—3000).
14—2. If] still have problem for pairing link with bluetooth telephone, how
do I do?
A: Try to push the reset button, please refer its located at P9, No.27. Re-
Pair again. lfstill problem please call local distributor.
14-3. How many bluetooth device do I store in BT-3000?
A: The BT-3000 could store the latest 7 headsets which has been paired
already
14-4. When the noise occur on bluetooth headset (ht-5)?
A: Low power battery, over limited distance, over two metal or cement
walls for isolating, too close the interference source.
BPVOICE CO,,LTD, Pll http://www.BPVOICE.com/
Q?‘ ‘49
B 3.3.3: BT-3llllO-User Manual-English
15. Service Center in USA:
Company: VisiondecorCompany
TEL: +17626—820—1250 #201 (Contact Person: Henry Lee)
FAX:+1—626.820.1252
Emaill: service@bpvoice.com (Contact Person: Bob Chen)
Email2: henryl@visiondecor.com (Contact Person: Henry Lee)
167 Mason way, Suite A1, City of Industry, CA 91746, USA.
16. Warning:
Warning: Changes or modifications to this unit not expressly approved by the party
responsibleforcompliancecouldvoidthe userauthoritytooperatethe equipment.
”This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation."
17. Note:
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications,
l—owever, there is no guarantee that interference will not occur in a particular installation If
this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct
theinterference byoneormoreofthefollowing measures:
Reorient or relocate the receiving antenna
III Increasethe separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from thatto which the
receiveris needed.
III Consultthe dealer oran experienced radio/TVtechnician for help.
F© 5&3?)ng ‘Remark.1"(any other information that may be required.)
ng‘gggggfigggo ‘Remark.2.*(BPVOICE co., LTD. will putfurther customer using tips or
further information of BT-3000 at blow website or authorized agency)
BPVOICE CO,, LTD, P 1 2 http://www.BPVOICE.com/
l 49

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 8
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:4a7bcd06-0a9d-4b93-a6d6-2c7598f7a218
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2009:01:23 09:51:15-08:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:01:23 09:53:30-08:00
Metadata Date                   : 2009:01:23 09:53:30-08:00
Document ID                     : uuid:20662c11-e71c-4c6e-b968-db868c22e5d1
Format                          : application/pdf
Title                           : User Manual.pdf
Creator                         : daniel
Author                          : daniel

EXIF Metadata provided by EXIF.tools