BQT Solutions BT817 CONTACTLESS SMARTCARD READER User Manual APPENDIX B
BQT Solutions (Australia) Pty Ltd CONTACTLESS SMARTCARD READER APPENDIX B
USER MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 554844 |
| Application ID | ONjhRqgzSAwymlNWle18iw== |
| Document Description | USER MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50.57kB (632117 bits) |
| Date Submitted | 2005-06-22 00:00:00 |
| Date Available | 2005-06-22 00:00:00 |
| Creation Date | 2005-06-03 09:03:22 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2005-06-22 10:18:20 |
| Document Title | APPENDIX B |
| Document Creator | Acrobat PDFMaker 6.0 for Word |
| Document Author: | Les Dickenson |
FCC ID: QVL-BT817 Page 1of 7 APPENDIX J INSTALLATION (USER) MANUAL EMC Technologies Pty Ltd 3/87 Station Rd Seven Hills NSW 2147 Australia Tel: +61 2 9624 2777 Fax: +61 2 9838 4050 For further information or to find out more about our range of smart card and biometric solutions, visit BQT Solutions on the web at: www.bqtsolutions.com Alternatively you can contact us at one of our global locations. AUSTRALIA & ASIA PACIFIC Level 4, 65 Epping Road North Ryde NSW 2113 Australia phone: +61 (0)2 8817 2800 fax: +61 (0)2 8817 2811 email: info@bqtsolutions.com UNITED KINGDOM & EMEA Global House,1 Ashley Avenue, Epsom Surrey KT 18 5AD United Kingdom phone: + 44 (0)20 8823 9350 fax: + 44 (0)20 8823 9001 email: info@bqtsolutions.co.uk AMERICAS 15030 Ventura Blvd., Ste. 19-798 Sherman Oaks, CA 91403 United States of America phone: +1 818 994 6888 fax: +1 818 994 0225 email: infousa@bqtsolutions.com CHINA Suite 1208-1209, Offshore Oil Tower 583 LingLing Rad, ZuHui District Shanghai, P.R. CHINA 20030 phone: +86 (21) 5425 5935 fax: +86 (21) 5425 5936 email: china@bqtsolutions.com For Technical Support, email: techsupport@bqtsolutions.com 817 MIFARE ACCESS READER INSTALLATION GUIDE Version 1.1 NOTE: Information contained in this document is subject to change without notice. Copyright © 200 BQT Solutions Limited. All rights reserved. BQT Solutions and the BQT Solutions logo are registered trademarks of BQT Solutions (Australia) Pty Ltd. Mifare is a registered trademark of Philips Electronics. bt817_10wire_v1.1: Last revised April 2005 Designed & Manufactured in Australia INTRODUCTION Thank you for purchasing the BT817 Mifare Contactless Smart Card Access Reader with KeyPad. ® WIRING SCHEMATIC Reader Connection The BT817 is used in security applications and interfaces into Wiegand applications. RED BLACK YELLOW/W* GREEN/W* YELLOW ORANGE GREEN WHITE BROWN/W* BROWN/W* The BT817 is preset with specific 'Keys'. Valid smart cards are issued with the same 'Keys'. This ensures that the system cannot be compromised. The reader incorporates a LED to provide feedback to a person wishing to enter. The LED is controlled by the security system. The BT817 is low profile and can be installed in new installations or as an upgraded reader in existing proximity access control systems. Power Cable +12Vdc GND 485A 485B BUZ LED W0 W1 T1 T2 +12Vdc 0V Power Supply GND BUZ LED W0 W1 Controller Controller Cable NOTE: If used with a shielded cable, the shield is connected to Building GND. * Tamper & RS485 cable connections are optional. INSTALLATION NOTE: The 0V or GND reference cable shall be included within the controller cable. The 12Vdc power cable shall NOT be included in the controller Cable. REGULATORY INFORMATION CE Mark The BT817 has passed all relevant tests and obtained CE approval. C Tick The BT817 has passed all relevant requirements for application of C Tick. WXY PRS MNO This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: GHI DEF FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna - Increase the separation between the equipment and receiver - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected - Consult the dealer or an experienced radio/TV technician for help Any changes or modifications not expressively approved by BQT Solutions could void the user's authority to operate this equipment. Remove the cover by holding the unit by the rim and pushing the reader out with your thumbs. -1- Designed & Manufactured in Australia - 10 - WARRANTY The BT817 comes with a 3 year warranty from the date of dispatch from BQT Solutions. The warranty is void if the instructions contained within this manual have not been adhered to. See the BQT Solutions website for further terms and conditions. 30 30 Wall View SPECIFICATIONS Reader Output Wiegand 26 to 40 bit Power requirements 12Vdc Maximum Current Consumption 320mA Read range 20 - 60mm (0.8” – 2.4”)(typically) Operating temperature -10ºC to +55ºC (14ºF to 131ºF) Relative humidity 90% max, operating non-condensing Reader dimensions 90mm x 90mm x 27mm (3.54" 3.54" x 1.06") KeyPad 12 button illuminated KeyPad Status LED’s Green and Red Audible tone Tone on matching software key and wired external buzzer control Colour Charcoal IP rating IP 67 If necessary, drill holes for the mounting screws in the wall or mounting box on which the reader unit will be placed. Use the template provided. 1. Place the controller and power supply cable through the Grommit hole. 2. Drill the holes as indicated by the arrows. NOTE: Make sure that you don't drill through the cable. Check your circuit diagram for the colour coding of the circuit wiring. The reader can be damaged beyond repair if the wiring is connected incorrectly. Read the instructions on the next page first. -9- -2- ! If the reader has the same power supply as the door latch relay, make sure that the relay is protected by a fast Schottky diode (Part number: Philips BYV10-20). If the relay is not protected reader operation will be affected. EXTERNAL USE Mount the reader on a suitable external single gang surface mount box. Make sure that the wire bundle to the BT817 has an IP rating of at least IP67. 1. Connect the 0V Reference and 0V (if provided in the power supply) to Ground (GND). 2. Connect the Wiegand signal cables. 3. Connect the Buzzer and the LED cables. Use warming pads if the temperature of the reader is expected to fall below -10ºC (14ºF). HANDLING OPTIONAL: Connect the RS485 and Tamper cables. Handle the BT817 with care. Do not damage/drop unit before installation. 4. Attach the 12Vdc wire last. The reader unit will not be waterproof if the casing is damaged. Replace the reader if the casing is damaged. 5. Place the reader on the wall (Make sure the wires are not crushed) 6. Insert and hand tighten the screws. MAINTENANCE Once installed the BT817 requires no maintenance. QZ 7. NOTE: DEF GHI JKL MNO PRS TUV WXY Symptom Possible cause Check LED is not lit No power to the reader Check the power supply to the reader. LED is Orange or Buzzer sounds low Voltage to the reader is below 10V Check the power supply to the reader Check that the reader is level before tightening the screws. Reader doesn’t respond Invalid card or card is faulty Check reader with another valid smartcard Excessive tightening of screws may deform the casing, resulting in a damaged unit. THIS WILL VOID THE WARRANTY. Reader beeps but lock doesn’t open Wiring to the controller faulty. Check the wiring to the controller 8. Replace the cover. 9. Power up the reader. NOTE: ABC TROUBLESHOOTING If the reader doesn't respond when a valid smart card is presented, check the following. NOTE: If reader beeps when a valid smart card is presented then the reader is functioning. If the problem still exists then uninstall the reader and send it back to BQT Solutions (address details on the back of this manual). If the reader is within the warranty period then another will be sent free of charge. The unit needs approximately 13 seconds to set up before it can respond to a valid smart card. -3- -8- THIS PAGE LEFT BLANK INTENTIONALLY DRILLING TEMPLATE FOR BT817 Carefully remove this middle section of the manual to use as a drilling guide. -7- -4- DRILLING TEMPLATE FOR BT817 20mm (0.79”) hole for wire entry 2mm x 4 mm (0.08” x 0.16”) holes for mounting screws Minimum outer dimension is 90 mm x 90 mm (3.54” x 3.54”) so as not to interfere with any other components -5- -6-
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V1.2 (40-bit) User Access : Print, Fill forms, Extract, Assemble, Print high-res Modify Date : 2005:06:22 10:18:20+10:00 Create Date : 2005:06:03 09:03:22+10:00 Company : EMC Technolgies Pty Ltd Source Modified : D:20050602230316 Page Count : 7 About : uuid:b0bd93cc-08f6-42f2-a1cd-93a3088afb6e Producer : Acrobat Distiller 6.0 (Windows) Creation Date : 2005:06:03 09:03:22+10:00 Mod Date : 2005:06:22 10:18:20+10:00 Author : Les Dickenson Headline : Creator Tool : Acrobat PDFMaker 6.0 for Word Metadata Date : 2005:06:22 10:18:20+10:00 Keywords : Document ID : uuid:7980ac72-aa80-4285-96a3-99a3c9548da7 Version ID : 3 Format : application/pdf Title : APPENDIX B Creator : Les Dickenson Subject : Tagged PDF : NoEXIF Metadata provided by EXIF.tools