BQT Solutions BT900A CONTACTLESS SMARTCARD READER User Manual USERS MANUAL

Download:
Mirror Download [FCC.gov]
Document ID	718214
Application ID	yBOSlM8stioLr+LYkhY5Ug==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11kB (137529 bits)
Date Submitted	2006-10-20 00:00:00
Date Available	2006-10-25 00:00:00
Creation Date	2006-09-27 11:29:28
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-10-17 10:07:22
Document Title	Microsoft Word - APPENDIX L_User Manual T60822_f.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Les Dickenson

Page 1 of 3
EMC Technologies
ABN 82 057 105 549
Unit 3/87 Station Road
Seven Hills NSW 2147 Au
Telephone
+61 2 9624
Facsimile
+61 2 9838
Email
syd@emctech
www.emctech.com.au
APPENDIX L
OF
TEST REPORT T 60822_F
USER MANUAL
FCC ID:
Manufacturer:
Test Sample:
Model:
Serial Number:
QVL-BT900A
BQT Solutions (Australia) Pty Ltd
Contactless Smart Card Reader
BT900-WG
None
Date: 4th September 2006
Melbourne
57 Assembly Drive
Tullamarine Vic 3043
Tel: +61 3 9335 3333
Fax: +61 3 9338 9260
Sydney
Unit 3/87 Station Road
Seven Hills NSW 2147
Tel: +61 2 9624 2777
Fax: +61 2 9838 4050
Brisbane
1/15 Success Street
Acacia Ridge Qld 4110
Tel: +61 7 3875 2455
Fax: +61 7 3875 2466
Auckland (NZ)
47 MacKelvie Street
Grey Lynn Auckland
Tel: +64 9 360 0862
Fax: +64 9 360 0861
AUSTRALIA & ASIA PACIFIC
Level 4, 65 Epping Road
North Ryde NSW 2113 Australia
Phone: +61 (0)2 8817 2800 Fax: +61 (0)2 8817 2811
AMERICA
30021 Tomas Street, Suite 300
Rancho Santa Margarita CA 92688 United States of America
Phone: +1 877 278 2637 (ext 42) Fax:+1 877 278 2637
UNITED KINGDOM & EMEA
Global House, 1 Ashley Avenue, Epsom
Surrey KT 18 5AD United Kingdom
Phone: + 44 (0)20 8823 9350 Fax: + 44 (0)20 8823 9001
CHINA
Suite 1602, No.75, ShengDa Garden, 2518 LongHua Road,
XuHui District, Shanghai 200232, P.R.China
Tel: +86-21-5407 3638 Fax: +86-21-5407 3738
9 series_v2.9 Sep06
INSTALLATION GUIDE
Version 2.9
Alternatively contact us at one of our global locations
For further technical information visit our website at www.bqtsolutions.com
or email techsupport@bqtsolutions.com.
Information contained in this document is subject to change without notice.
Audible tone
Internal or external buzzer control
Colour
Two toned – Silver & Charcoal
IP rating
IP 67
miPASS 9 Series Mifare
reader models
DF900 - DESFire
BT900 - Mifare
miP9 - SPEK
CSN9 - Card Serial Number
Read range
20 - 60mm (0.8” – 2.4”)(typically)
Operating temperature
-25ºC to +65ºC (-13ºF to 149ºF)
Relative humidity
90% max, operating non-condensing
Reader dimensions
140mm (L) x 45mm (W) x 32mm (D) (5.51” x 1.77” x 1.26”)
Status LED’s
Green & Red
Normal
120mA
Activated
140mA
Current consumption
Output protocols
Wiegand 26-199 bit, RS485 or custom configurations (model dependent)
Power requirements
12Vdc
Drilling Template
4mm Ø
Wiring Schematic
Reader connections
Power Cable
62mm
DF900D, DF900DG,
BT900D, BT900DG
BT900W, BT900WG
miP9, CSN9
For all 9 Series readers
● 20mm (0.79”) diameter
hole for wire entry
● 2 x 4 mm (0.16”) diameter
holes for mounting screws
● Minimum reader dimensions
are 140mm x 45 mm
(5.51" x 1.77")
➣
Specifications
BUZ
LED
W0
W1
RS485A
RS485B
YELLOW
ORANGE
GREEN
WHITE
YELLOW/W
GREEN/W
+12Vdc
0V
RED
BLACK
Power Supply
+12Vdc
0V
0V
BUZ
LED
W0
W1
Controller
Controller Cable
NOTE: If used with a shielded
cable, the shield is connected
to Controller 0V reference
NOTE:
20mm Ø
➣➣
The 0V reference cable shall be included within the controller cable.
The 12Vdc power cable shall NOT be included in the controller Cable.
Only ONE power source is connected from the reader at any one time.
RS485 - OPTIONAL USE
Regulatory Information
CE Mark
The 9 Series has passed all relevant tests and obtained CE approval.
C Tick
The 9 Series has passed all relevant requirements for application of C Tick.
45mm
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
BT900D, BT900DG, DF990D, DF900DG
BT900WG
miP9, CSN9, BT900W
4mm Ø
➣
FCC ID: QVL - BT900P
FCC ID: QVL -BT900A
FCC ID: QVL MIP9
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help
Designed & Manufactured
in Australia
Any changes or modifications not expressively approved by BQT Solutions could void the user's authority to operate this equipment.
Copyright © 2006 BQT Solutions Limited. BQT Solutions and the BQT Solutions
logo are registered trademarks of BQT Solutions (Australia) Pty Ltd.
Mifare is a registered trademark of Philips Electronics.
9 series_v2.8.ai
15/08/2006
11:08:35 AM
Introduction
Thank you for purchasing a miPASS 9 Series Mifare Contactless Smart Card Reader. Available in 4 different
models catering for all security requirements large or small, whether your projects are price or functionality
driven. The 9 Series reader models are:
DF900 - DESFire
BT900- Mifare (standard)
miP9 - BQT SPEK
CSN9 - Card Serial Number
NOTE:
Power to the unit is provided from the Listed control unit or from a separately supplied UL Listed
12 Vdc power-limited, access control power source.
Wiring methods shall be in accordance with the National Electrical Code, ANSI/NFPA 70.
The 9 Series reader is used in security applications and interfaces into Wiegand applications.
The 9 Series reader is preset with specific 'Keys'. Valid smart cards are issued with the same 'Keys'. This
ensures that the system cannot be compromised. (No 'Keys" used for CSN9 model)
The reader incorporates a LED and Buzzer to provide feedback to a person wishing to enter. The control of
these is shared by the reader and security controller.
The 9 Series reader is low-profile and can be installed in new installations or as an upgraded reader in existing
proximity access control systems.
Installation
If the reader has the same power supply as the door latch relay, make sure that the relay is
protected by a fast Schottky diode. If the relay is not protected reader operation will be affected.
1.
NOTE:
2.
3.
4.
5.
6.
7.
Connect the 0V wire to the Power 0V line.
The 0V line of all power supplies MUST be connected to a common 0V reference point.
Connect the Wiegand signal cables.
Connect the Buzzer and the LED cables.
Attach the 12Vdc wire last.
Place the reader on the wall (Make sure the wires are not crushed)
Insert and hand tighten the screws.
Check that the reader is level before tightening the screws.
NOTE:
Excessive tightening of screws may deform the casing, resulting in a damaged unit.
This will void the warranty.
8.
9.
Replace the cover.
Power up the reader.
NOTE:
The unit needs up to 15 seconds to set up before it can respond to a valid smart card.
Remove the cover by holding the unit as
shown and pulling the cover from the top as illustrated
CM
MY
CY
CMY
If necessary, drill holes for the mounting screws in the wall or mounting box on which the reader unit will be
placed. (Use the Drilling Template provided).
External Use
➣
4mm Ø
62mm
Handling
WALL VIEW
(not to scale)
45mm
➣➣
20mm Ø
➣
Note: Make sure that you don't drill through the cable.
Once installed the 9 Series reader requires no maintenance.
Troubleshooting
1. Place the controller and power supply cable through the Grommit hole.
2. Drill the holes as indicated by the arrows.
Handle the 9 Series reader with care. Do not damage/drop unit before installation.
The reader unit will not be waterproof if the casing is damaged. Replace the reader if the casing is
damaged.
Maintenance
4mm Ø
Mount the reader on a suitable external single gang surface mount box.
USA ONLY - BQT mounting plate adaptor is available for mounting to a US single gang box.
Make sure that the wire bundle to the 9 Series reader has an IP rating of at least IP67.
Use warming pads if the temperature of the reader is expected to fall below -10ºC (14ºF).
If the reader doesn't respond when a valid smart card is presented, check the following.
Symptom
Possible Cause
Check
LED is not lit
No power to the reader
Check the power supply to the reader.
LED is Orange or Buzzer sounds low
Voltage to the reader is below 10V
Check the power supply to the reader
Reader doesn't respond
Invalid card or card is faulty
Check reader with another valid smart card
Reader beeps but lock doesn't open
Wiring to the controller may be faulty.
Check the wiring to the controller
NOTE: If reader beeps when a valid smart card is presented
then the reader is functioning.
Check your circuit diagram for the colour coding of the circuit wiring. The reader can be damaged beyond
repair if the wiring is connected incorrectly.
If the problem still persists then please contact your distributor for technical support and to obtain an RMA if
required.
Warranty
The 9 Series reader comes with a 5 year warranty from the date of dispatch from BQT Solutions. The
warranty is void if the instructions contained within this manual have not been adhered to.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Modify Date                     : 2006:10:17 10:07:22+10:00
Create Date                     : 2006:09:27 11:29:28+10:00
Page Count                      : 3
PDF Version                     : 1.6
About                           : uuid:fadf8df4-4885-40c2-b4f0-b2ee5fde6f85
Producer                        : Acrobat Distiller 6.0 (Windows)
Creation Date                   : 2006:09:27 11:29:28+10:00
Mod Date                        : 2006:10:17 10:07:22+10:00
Author                          : Les Dickenson
Creator Tool                    : PScript5.dll Version 5.2
Metadata Date                   : 2006:10:17 10:07:22+10:00
Document ID                     : uuid:a3d5151d-f65d-43c8-ac25-9dc2f16ed274
Format                          : application/pdf
Title                           : Microsoft Word - APPENDIX L_User Manual T60822_f.doc
Creator                         : Les Dickenson

EXIF Metadata provided by EXIF.tools