BRAGI B1000H The Dash Headset User Manual

BRAGI GMBH The Dash Headset Users Manual

Contents

Users Manual

aaBRAGIhighfullmediumlowhighfullmediumlowhighfullmediumlowhighfullmediumlowhighfullmediumlowhighfullmediumlowhighfullmediumlowhighfullmediumlowBRAGIWith The PerfectFit you should feel The Dash completely closing off your ear canal while it sits snugly in your ear.Achieving The PerfectFit may require some adjust-ment. To adjust you can use one hand to lift up in your ear and adjust with the other. By doing this you should be able to press the upper part of The Dash into a locked position as shown in the dia-gram above.To activate The Dash connect The Charger including The Dash to your computer via the USB Cable. The Dash is activated when the LightGuide flashes blue. You may now safely eject and disconnect at any time.Download the Bragi App on bragi.comRegister your Dash through the bragi app to get full support.Before you get startedActivate the DashTo charge the battery, connect The Charger to your Computer or another power source via USBThe Charger fully charges The Dash up to 5 times while on-the-go.Place The Dash in The Charger and make sure it sits on the MagSnap.Shake The DashAnd you will see the current battery status of your Dash.Check out the LED on the side of The Charger to see the current battery status. The Dash needs to be placed in The Charger or The Charger needs to be connected to a power source.Take The Right Dash, tilt it slightly forward and insert the speaker tip into your ear canal.Adjust to a PerfectFit by rotating The Dash back-wards until it feels comfortable and secure in your ear.Bragi AppDownload itCustomizeDownload the free Bragi App nowto personalize and set up your Dashbragi.com/appThe Dash is already fitted with XS FitSleeves. Try different sizes to find your PerfectFit. The PerfectFit is important to ma-ximise performance of The Dash and accuracy the DataHub.How to check the batteryThe Dash & ChargerHow to insertThe DashHow to wearThe PerfectFitHow to changeThe FitSleevesDownload fromWindows Phone StoreL M S XS How to chargeThe Dash & Charger
A 5 secTap2x TapRight DashListen & CommunicateLeft DashTrackActivity feedback-Next songPlay / Pause musicAudio Transparency On/Off Volume Up / DownTapHoldStart / End activityNext activitySelect playlistNext playlistPairing mode Activity Data Pairing mode AudioActivity Menu Start / Exit Playlist Menu Start / Exit Tap Answer a callEnd a callHoldSwipe2x Tap Activate standalone modeOnly R Dash inserted5 sec.Touch ControlExperience the full capabilities of The Dash & reveal all of it‘s exciting features.Touch and hold The Right Dash for 5 seconds to enter pairing mode.Select The Dash in your Bluetooth settings and connect.connection visible for max. 2 minutesBragi GmbH, Munich, Germany, EarthCopyright ©2015 Bragi GmbH. All rights reserved. BRAGI, The Dash, and the B logo are trademarks of Bragi GmbH in the U.S. or one or more other countries. The absence of a product or service name or logo from this list does not constitute a waiver of Bragi GmbH trademark or other intellectual property rights concerning that name or logo. Patents pending.Quick Start GuideThe Dashbragi.com/supportThe DashThe Charger & The SlideFitSleevesXS / S / M / LUSB to Micro USB CableHow to connectBluetooth & The DashManual & RegistrationReveal all featuresHow to interactBasic gesturesWhat’s inside the box?The Dash v 1.0, 201603, V2B QSM EnglishModel B1000, B1000H, B1000C, B1000L, B1000R
CE statement： Do not use the product in the environment at too high or too low temperature, never expose the product under strong sunshine or too wet environment. The suitable temperature for the product and accessories is 0℃-50℃. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Excessive sound pressure from earphones and headphones can cause hearing loss. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. FCC RF exposure: The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction IC statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Should be translated to: Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. IC RF exposure:
The SAR limit of Canada is 1.6 W/kg averaged over one gram of tissue. Device types B1000H has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.074W/kg and for head is 0.017W/kg.

Navigation menu