Users Manual
Before you get started Activate the Dash How to charge The Dash & Charger To activate The Dash connect The Charger including The Dash to your computer via the USB Cable. The Dash is activated when the LightGuide flashes blue. You may now safely eject and disconnect at any time. How to check the battery The Dash & Charger How to insert The Dash Place The Dash in The Charger and make sure it sits on the MagSnap. Download the Bragi App on bragi.com high low low full high Bragi App Download it medium low full high medium high low medium low full high full medium high low full high medium low medium Customize Download the free Bragi App now to personalize and set up your Dash bragi.com/app Download from Windows Phone Store BRAGI To charge the battery, connect The Charger to your Computer or another power source via USB The Charger fully charges The Dash up to 5 times while on-the-go. The PerfectFit is important to maximise performance of The Dash and accuracy the DataHub. full Shake The Dash high And you will see the current medium battery status of your Dash. full medium BRAGI How to change The FitSleeves The Dash is already fitted with XS FitSleeves. Try different sizes to find your PerfectFit. Take The Right Dash, tilt it slightly forward and insert the speaker tip into your ear canal. Adjust to a PerfectFit by rotating The Dash backwards until it feels comfortable and secure in your ear. full Register your Dash through the bragi app to get full support. How to wear The PerfectFit With The PerfectFit you should feel The Dash completely closing off your ear canal while it sits snugly in your ear. low Check out the LED on the side of The Charger to see the current battery status. The Dash needs to be placed in The Charger or The Charger needs to be connected to a power source. Achieving The PerfectFit may require some adjustment. To adjust you can use one hand to lift up in your ear and adjust with the other. By doing this you should be able to press the upper part of The Dash into a locked position as shown in the diagram above. XS v 1.0, 201603, V2B QSM English Model B1000, B1000H, B1000C, B1000L, B1000R How to interact Basic gestures How to connect Bluetooth & The Dash Touch and hold The Right Dash for 5 seconds to enter pairing mode. Select The Dash in your Bluetooth settings and connect. connection visible for max. 2 minutes Touch Control What’s inside the box? The Dash Manual & Registration Reveal all features bragi.com/support Experience the full capabilities of The Dash & reveal all of it‘s exciting features. 5 sec. Left Dash Track Tap 2x Tap Next song Audio Transparency On/Off Swipe Volume Up / Down Pairing mode Activity Data 5 sec Pairing mode Audio Start / End activity Hold Tap Next activity Bragi GmbH, Munich, Germany, Earth Copyright ©2015 Bragi GmbH. All rights reserved. BRAGI, The Dash, and the B logo are trademarks of Bragi GmbH in the U.S. or one or more other countries. The absence of a product or service name or logo from this list does not constitute a waiver of Bragi GmbH trademark or other intellectual property rights concerning that name or logo. Patents pending. Play / Pause music Activity feedback Activity Menu Start / Exit Quick Start Guide The Dash Right Dash Listen & Communicate FitSleeves XS / S / M / L Playlist Menu Start / Exit Select playlist Next playlist Tap Answer a call Hold End a call Only R Dash inserted 2x Tap The Dash The Charger & The Slide Activate standalone mode USB to Micro USB Cable CE statement: Do not use the product in the environment at too high or too low temperature, never expose the product under strong sunshine or too wet environment. The suitable temperature for the product and accessories is 0℃-50℃. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Excessive sound pressure from earphones and headphones can cause hearing loss. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. EU Regulatory Conformance Hereby, Bragi GMBH declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. FCC RF exposure: The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction IC statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Should be translated to: Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. IC RF exposure: The SAR limit of Canada is 1.6 W/kg averaged over one gram of tissue. Device types B1000L has also been tested against this SAR limit. The highest SAR value reported under this standard during product certification for use when properly worn on the body is 0.074W/kg and for head is 0.016W/kg.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Create Date : 2016:04:01 14:14:55+08:00 Creator : Adobe Acrobat Pro 9.3.2 Modify Date : 2016:04:01 14:15:33+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2016:04:01 14:15:33+08:00 Creator Tool : Adobe Acrobat Pro 9.3.2 Format : application/pdf Document ID : uuid:28a9e6f8-c20f-4596-8dee-9e955c4e0fec Instance ID : uuid:0e55c9b2-7f62-4b77-b56c-fe4ac8ef3cc0 Producer : Adobe Acrobat Pro 9.3.2 Page Count : 4EXIF Metadata provided by EXIF.tools