BRAGI B1001R The Dash Right User Manual

BRAGI GMBH The Dash Right

Users Manual

BRAGIhighfullmediumlowhighmediumlowWith The PerfectFit you should feel The Dash completely closing off your ear canal while it sits snugly in your ear.Achieving The PerfectFit may require some adjust-ment. To adjust you can use one hand to lift up in your ear and adjust with the other. By doing this you should be able to press the upper part of The Dash into a locked position as shown in the dia-gram above.To activate The Dash connect The Charger including The Dash to your computer via the USB Cable. The Dash is activated when the LightGuide flashes blue. You may now safely eject and disconnect at any time.Download the Bragi App on bragi.comRegister your Dash through the bragi app to get full support.Before you get startedActivate the DashTo charge the battery, connect The Charger to your Computer or another power source via USBThe Charger fully charges The Dash up to 5 times while on-the-go.Place The Dash in The Charger and make sure it sits on the MagSnap.Shake The DashAnd you will see the current battery status of your Dash.Check out the LED on the side of The Charger to see the current battery status. The Dash needs to be placed in The Charger or The Charger needs to be connected to a power source.Take The Right Dash, tilt it slightly forward and insert the speaker tip into your ear canal.Adjust to a PerfectFit by rotating The Dash back-wards until it feels comfortable and secure in your ear.Bragi AppDownload itCustomizeDownload the free Bragi App nowto personalize and set up your Dashbragi.com/appThe Dash is already fitted with XS FitSleeves. Try different sizes to find your PerfectFit. The PerfectFit is important to ma-ximise performance of The Dash and accuracy the DataHub.How to check the batteryThe Dash & ChargerHow to insertThe DashHow to wearThe PerfectFitHow to changeThe FitSleevesDownload fromWindows Phone StoreL M S XS How to chargeThe Dash & Charger
5 secTap2x TapRight DashListen & CommunicateLeft DashTrackActivity feedback-Next songPlay / Pause musicAudio Transparency On/Off Volume Up / DownTapHoldStart / End activityNext activitySelect playlistNext playlistPairing mode Activity Data Pairing mode AudioActivity Menu Start / Exit Playlist Menu Start / Exit Tap Answer a callEnd a callHoldSwipe2x Tap Activate standalone modeOnly R Dash inserted5 sec.Touch ControlExperience the full capabilities of The Dash & reveal all of it‘s exciting features.Touch and hold The Right Dash for 5 seconds to enter pairing mode.Select The Dash in your Bluetooth settings and connect.connection visible for max. 2 minutesBragi GmbH, Munich, Germany, EarthCopyright ©2015 Bragi GmbH. All rights reserved. BRAGI, The Dash, and the B logo are trademarks of Bragi GmbH in the U.S. or one or more other countries. The absence of a product or service name or logo from this list does not constitute a waiver of Bragi GmbH trademark or other intellectual property rights concerning that name or logo. Patents pending.Quick Start GuideThe Dashbragi.com/supportThe DashThe Charger & The SlideFitSleevesXS / S / M / LUSB to Micro USB CableHow to connectBluetooth & The DashManual & RegistrationReveal all featuresHow to interactBasic gesturesWhat’s inside the box?The Dash v 1.0, 201603, V2B QSM EnglishModel B1000, B1000H, B1000C, B1000L, B1000R
CE statement˖ Do not use the product in the environment at too high or too low temperature, never expose the product under strong sunshine or too wet environment. The suitable temperature for the product and accessories is 0ć-50ć. CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Excessive sound pressure from earphones and headphones can cause hearing loss. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction FCC statements: This device complies with part 15 of the FCC rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference causedby unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment. RF exposure: The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction IC statement: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Should be translated to: Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s). Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne peut pas provoquer d'interférences, et (2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates uses and can radiate radiofrequency energy and, if not installed and used in accordance with the instructions,may cause harmful interference to radio communications. However, there is noguarantee that interference will not occur in a particular installation. If thisequipment does cause harmful interference to radio or television reception, whichcan be determined by turning the equipment off and on, the user is encouraged totry to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which thereceiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Navigation menu