BRAVEN LC B405 Portable Bluetooth Speaker User Manual
BRAVEN LC Portable Bluetooth Speaker
User manual
QUICK START GUIDE
405
2Full manual and troubleshooting: braven.com/manuals
GET TO KNOW YOUR BRAVEN
POWER BUTTON
PLAY / PAUSE MUSIC /
PAIRING / ANSWER-END CALL
+ VOLUME UP / SKIP TRACK
(press and hold)
- VOLUME DOWN / SKIP
BACK (press and hold)
I/O PORT COVER
(remains attached, must
be secured tightly to
speaker for waterproong)
3.5 MM AUDIO-IN JACK
EXTERNAL USB
CHARGING PORT
BRAVEN CHARGING PORT
RESET BUTTON
LED BATTERY INICATOR RING
-Each pair of LEDs are 20%
FOLD-OUT KICKSTAND
BATTERY CHECK BUTTON
PRESS FOR BATTERY
CHECK WHEN CLOSED
3
TURN ON & BLUETOOTH® PAIRING
1. Press the Power Button for 2-3 seconds
to turn on your BRAVEN (405). Press the
same button again for 2-3 seconds to
turn your BRAVEN off.
2. Activate Bluetooth® on the phone or
device you are pairing with (see your
device’s instruction manual for information
on activating its Bluetooth® settings).
3. Press and hold the Play / Pause Button
on your BRAVEN until you hear the
BRAVEN pairing sound. LEDs and backlit
buttons will ash during pairing process.
4. Go to your phone or device’s Bluetooth®
settings and select “BRAVEN 405” from
the list.
5. If asked for a passcode enter “0000”
Your BRAVEN will remember the last 8
devices it has paired with.
NOTE: If your BRAVEN does not have
an active Bluetooth® connection and
is left on, it will shut itself off after 30
minutes. To restart your BRAVEN you
will need to press and hold the Power
Button for 2-3 seconds.
4Full manual and troubleshooting: braven.com/manuals
CHARGING YOUR BRAVEN
• Before using your BRAVEN for the rst
time, charge the unit until all LEDs are
off, indicating a full charge (typically
2 hours).
• To charge your BRAVEN, plug the
included USB-to-Micro-USB cable
into a wall power adapter (not
included) or into a powered USB port
on a computer. Plug the Micro-USB
connector end of the cable into the
BRAVEN charging port.
• 10 Minutes before BRAVEN 405 runs
out of power, an audio alert will sound.
Just before complete power drain, the
audio alert will sound once more and
the speaker will shut down.
5
CHARGING EXTERNAL DEVICES
Your BRAVEN is designed to charge
USB devices that draw from 0.3A - 1A
(most cell phones & mp3 players –
tablets and other 2A devices cannot
be charged by your 405) using the full-
sized USB port located behind the I/O
port cover. To use external charging:
1. Turn your BRAVEN on.
2. Plug the USB power cable that came
with your phone, mp3 player, or other
mobile device into the USB port on
your BRAVEN.
3. Plug the other end of the cable into your
mobile device, and it will immediately
begin charging.
6Full manual and troubleshooting: braven.com/manuals
WATERPROOF FEATURES
• The BRAVEN 405 is IPX7 waterproof,
and is designed to withstand rainfall,
waterjets, water splashing, and dunk in
the pool.
• IMPORTANT To ensure your BRAVEN
405 speaker is prepared for use in
a wet environment, remove all cable
connections and tightly close the I/O
port cover which guards the charging
port and AUX input on the side of the
speaker. If this cover is not securely
fastened to the speaker, BRAVEN 405
will not be waterproof.
360° AUDIO
• Lay BRAVEN 405 down on rubber feet
for 360° listening experience.
SPEAKERPHONE
• Press the Play / Pause Button on your
BRAVEN to answer the call over the
speaker. Press the Play / Pause Button
again to end the call.
7
WARNINGS, CAUTION & LEGAL INFORMATION
To reduce the risk of re or electric shock, do not expose the BRAVEN to rain or moisture while charging. The BRAVEN should
not be exposed to dripping or splashing, and objects lled with liquids, such as vases, should not be placed on or near it while
being charged or charging other devices. As with any electronic products, use care not to spill liquids into any part of the product.
Liquids can cause a failure and/or a re hazard. The power supply must be used indoors only. Make no modications to the
product or accessories. Unauthorized alterations may compromise safety, regulatory compliance, and system performance, and
will void the warranty. Do not place any ame sources, such as lighted candles, on or near the BRAVEN. The BRAVEN contains
small parts that may be a choking hazard and is not suitable for children under age 3. Do not continue charging the battery if
it does not reach full charge within the specied charging time. Overcharging may cause the battery to become hot, rupture,
or ignite. If you see any heat deformation or leakage, properly dispose of the battery. Do not attempt to charge the battery in
temperatures outside the range of 32°-104°F (0°-40°C). If the battery begins to leak, do not allow the liquid to come in contact
with your skin or eyes. If contact has been made, wash the affected area with plenty of water and seek medical attention
immediately. Do not expose the product or battery to excessive heat, including direct sunlight or re and storage or use inside
cars in hot weather, where it can be exposed to temperatures in excess of 115°F (60°C). Doing so may cause the battery and
power supply to generate heat, rupture, or ignite. Using the product in this manner also may result in a loss of performance and
a shortened life expectancy. Extended exposure to direct sunlight may damage the external appearance and material qualities.
Do not step on, throw, or drop batteries or the power supply or device, or expose them to a strong shock. Do not pierce, crush,
dent, or deform the batteries or power supply in any way. If either becomes deformed, properly dispose of it. Do not short-circuit
batteries. Do not attempt to service the BRAVEN yourself. Opening or removing covers may expose you to dangerous voltages
or other hazards and will void the manufacturer’s warranty. To prevent risk of re or electric shock, avoid overloading wall outlets,
8Full manual and troubleshooting: braven.com/manuals
WARNINGS, CAUTION & LEGAL INFORMATION (CONT)
extension cords, or integral convenience receptacles. Your Bluetooth device (mobile phone, music player, tablet, laptop, etc.) must
support the A2DP Bluetooth prole in order to work wirelessly with your new BRAVEN speaker. The A2DP prole is supported by
most recent mobile products with built-in Bluetooth capability. Please refer to your device’s user manual for details and instruction
regarding the Bluetooth proles it supports. This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or
an experienced radio/TV technician for help.
CAUTION: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
FCC RADIATION EXPOSURE STATEMENT: This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
9
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device. Under Industry Canada regulations, this radio transmitter may only operate using an antenna
of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada.
Lithium Battery installed is not intended to be replaced by the USER.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF
exposure, users can obtain Canadian information on RF exposure and compliance.
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes
throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle
it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and
collection systems or contact the retailer where the product was purchased.
This product complies with California Energy Commission efciency standards for consumer battery chargers.
TUTORIALS: www.braven.com/tutorials
PHONE: 1-877-9 BRAVEN (1-877-927-2836)
SUPPORT: www.braven.com/support
EMAIL: support@braven.com
ONLINE: www.braven.com
MANUAL: www.braven.com/manuals
v3