BRAVEN LC BS360 Bluetooth speakers User Manual 2017 06 26
BRAVEN LC Bluetooth speakers 2017 06 26
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3444187 |
| Application ID | xT23QyQkwIMf1PwjxrwTgw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 29.11kB (363816 bits) |
| Date Submitted | 2017-06-29 00:00:00 |
| Date Available | 2017-06-29 00:00:00 |
| Creation Date | 2017-06-26 16:20:00 |
| Producing Software | GPL Ghostscript 9.07 |
| Document Lastmod | 2017-06-26 16:20:00 |
| Document Title | User Manual-2017.06.26 |
| Document Creator | PDFCreator Version 1.7.1 |
| Document Author: | kellhe |
INSTRUCTION MANUAL FOR BRAVEN STRYADE 360 WARNINGS This appliance is intended for domestic household use only and should not be used for any other purpose or in any other application, such as for non domestic use or in a commercial environment. I. Precautions 1. Please store and use this product at the ambient temperature; 2. Do not expose this product to the rain or damp surroundings; 3. Prevent this product from falling that could result in serious damage; 4. Do not dismantle, repair or modify this product on your own; 5. In order to avoid any risk, do not dispose this product inappropriately or toss it into the fire as there is a built-in lithium battery. II. Considerate Hints 1. Do not turn up the volume to a high level constantly as this could shorten the service life of this product or impair your hearing; 2. When encountering any fault during operation, please cut off the power supply and disconnect the USB cable to prevent further damage to the speaker or other components; 3. The Bluetooth transmission range or connectivity could be affected by low battery power. In that case, please recharge immediately. 4. Please remove audio cables for the use of Bluetooth III. Functional buttons Micro USB Port AUX IN Port Function Button USB Power Port • Click to pause during Bluetooth play and click to play during Bluetooth pause. Click to receive calls at Bluetooth state. Hold down the button to refuse the calls. IV. • Press – shortly to decrease the volume.,Press and hold – for 1.5 seconds to select songs upwards • Press + shortly to increase the volume,press and hold + to select songs downwards • Keep pushing 1.5 seconds to turn ON/OFF the speaker Bluetooth function 1. Turn on the speaker. The blue indicator light will flash to detect nearing Bluetooth enabled devices. The blue indicator light will go out and speaker auto-turn off if no Bluetooth device is detected within 5 minutes. 2. Pair the speaker with the desired Bluetooth device. 3. Play/pause as desired by pressing 4. When you want to play music or a movie from another Bluetooth device, disconnect and restart the Bluetooth speaker. Then re-pair both devices. 5. This speaker can only connect with one Bluetooth device at the same time V. Aux playback operation 1. Turn the speaker on. 2. Insert an 3.5mm audio cable into the aux jack on the back of the speaker, connecting to any audio device such as mobile phones or computers with the other port. 3. Press “ / VI. ” to enter mute mode and re-press to release sound. Charging the speaker The speaker has a built-in Lithium battery. The battery is rechargeable and provides approximately 5 hours of continuous operation when fully charged. Use the micro USB cable to charge the speaker. The red indicator light will illuminate and will only go out when the speaker is fully charged. VII. Hands-free calls When Bluetooth speaker is connected successfully to mobile phone, it will beep when calls are Incoming: VIII. • Press • Press twice to answer/hang up calls to replay the last call appealed. Bluetooth speaker specifications 1.Bluetooth Version: V4.2 2.Transmission distance: ≦10m; 3. Speaker power output: 7W*2 4. Size: 170*65*65mm 5. Audio input:: Bluetooth, AUX; 6. Power: USB / DC5V /Built in 18650 Lithium battery: 5000mAh; 7. Features: Volume control ,skip forward/back, with built in microphone for hands free (re-dail answer,ending,reject phone) 8.Playback time:about 12hours at 50% volume 9.Charging time:2=4hours 10.power bank function---output 5V-1A Compatibility Wireless：Devices configured with Bluetooth V4.0 or higher version such as iPad, iPhone , iPod Touch and Mac as well as the most models of Smartphone or computers that support Bluetooth. V4.0 Bluetooth version consists of protocols like A2DP, AVRCP and HFP and so on. IX. Packaging includes 1 Speaker 1 USB cable for the charge of the device 1 User's Manual Troubleshooting Problem Solution 1. Check if the speaker is still in the process of search or switch it off and then Unable to pair up with other devices on. 2. There are too many Bluetooth devices in the proximity that cause difficulty in connection. Please turn them off. The sound is rather low or 1. Check the Bluetooth device’s volume and then adjust it to a proper level. distorted 2. Recharge the battery The music stops from time to time there is an obstacle standing between the speaker and other Bluetooth devices. The Bluetooth indicator remains off 1. Check whether the speaker’s effective transmission range is exceeded or 1. It suggests the battery power drops quite low and retry once being recharged. 2. Turn it on again. Hints: Another trouble, please consult the dealer or an experienced radio/TV technician for help. This equipment maximum operating ambient temperature is 40°C The symbol indicates DC voltage RECYCLING: This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE). This means that this product must be handled pursuant to European directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. The symbol indicates battery charge system CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. FCC ID: Z7RBS360 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the product at least 20cm from nearby persons. IC ID: 10013A-BS360 IC STATEMENT This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes :(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. The device is compliance with RF field strength limits, users can obtain Canadian information on RF exposure and compliance. Le présent appareil est conforme de ce matériel aux conformités ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et la conformité d’acquérir les informations correspondante. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAN ICES-3 (B)/NMB-3(B)
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Page Count : 6 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:c1f8e8cc-5ca3-11e7-0000-4c40c250a8c8 Producer : GPL Ghostscript 9.07 Keywords : () Modify Date : 2017:06:26 16:20:00+08:00 Create Date : 2017:06:26 16:20:00+08:00 Creator Tool : PDFCreator Version 1.7.1 Document ID : uuid:c1f8e8cc-5ca3-11e7-0000-4c40c250a8c8 Format : application/pdf Title : User Manual-2017.06.26 Creator : kellhe Description : () Author : kellhe Subject :EXIF Metadata provided by EXIF.tools