BRAVEN LC Z6 Bluetooth Speaker User Manual Z6

BRAVEN LC Bluetooth Speaker Z6

user manual

Wireless Range Password Change Password?Supported Profiles User MsnualModel Name: BZ600 ，BZ600RBA，BZ600GBA，BZ600GBA-I，BZ600RBA-I，BZ625，BZ625BGB，BZ625GEB，BZ625BGB-I，BZ625GEB-I，BZ650，BZ650SBA，BZ650SBA-IFCC ID: Z7RZ6IC:10013A-Z6At least 10M (33 feet) NO password on V3.0 devices, On olderdevices use "0000" No !!Description UsageEnhanced Data Rate (EDR)Advanced Audio Distribution Profile(A2DP)1.2, Hands-Free Profile (HFP)1.5, Headset Profile (HSP) 1.1SBC Stereo Streaming(yes)AVRCPAudio/Video Remote ControlProfile(yes)Response
Phone/PairButton(MFB)Press for 5 seconds = GO INTOPAIRING MODEPress for 0.5 second = PICK UP CALL(when incoming call) After pairing success and playingmusic .The music will be paused ifpressed for 0.5 seconds to 5seconds .The music will be playingPAIRING - Press answer button for 5 seconds to go into pairing mode.White LED will be flashes 1 time every 0.4 seconds.PAIRED (CONNECTED): White LED will be flashes 1 time every 5seconds .There is a sound at the same time when connection is made.INCOMING CALL -Press answer button to answer call. The white LEDwill be flashes 2 times every 2 seconds when on the phoneEND CALL-Press answer button to end call. It will go back commonstate .White LED will be flashes 1 time every 5 secondsREJECT CALL - When there is a coming call ,If someone doesn't wantto answer the call,Long press answer button for 3 seconds to reject call.Then it will go back to common state .White LED will be flashes 1 timeevery 5 secondsMUTE-When on the phone. Press and hold answer button for 3 secondsVolume Up Button Increase Volumeseconds .The music will be playingagain if pressed for 0.5 seconds to 5seconds.As soon as button is pressed = Volume increase one increment there are16 incrementsPress and hold for 2 seconds = To next songAt maximum volume = have a beep at maximum volume.MUTEWhen on the phone. Press and hold answer button for 3 secondscould be mute the call .And Press and hold answer button for 3 secondsagain will be back on the phone.RESET-In pairing mode. Press and hold the answer button for 5 secondsto clear the previous pairing information LED lights up solid 2 seconds toconfirm memory cleared. Then returns to pairing mode, and light flashesevery .4 sec.
Volume Down3.5 audio inSwitch in upward position = ON，The white LED will be flashes 5times(0 2 seconds is on 0 2 seconds is off repeat 5 times ) There is aWhen audio is inserted, the sound level should be controlled by thespeakerDecrease VolumeAs soon as button is pressed = Volume decrease one increment (thereshould be 16 increments)Press and hold for 2 seconds = To previous songAt minumin volume = Beep at minimum volume(No Beep sound atminimum volume)Stereo inputPower On/Off SwitchMicro USB PortTurns speaker power on and offtimes(0.2 seconds is on,0.2 seconds is off ,repeat 5 times ).There is asound after 3 seconds. And then go into common (The white LED will beflashes 1 time every 5 seconds) Power ON sound will start play in 3seconds or less.Switch in downward position = OFF, The white LED will be flashes faster5 times. The power off sound will play.For charging speaker charges Speakercharging: LED in solid whiteCharging completed: white LED is off
Battery Check ButtonLine-out Port(3.5mm Stereo output)Use for connecting other speakers,when plugged into, the speaker willstill keep playing.Using 3.5mm to 3.5mm auxiliary cable (included), plug one end intospeaker and the other end into another speaker, to create more volume,Volume is controled by original speakerAs soon as button is pressed, The LED ring display the colors for every 30% of power as follows: 100-70% white, 35-70% Blue, 0-35% red.Plug into USB port on speaker with the USB charge cable supplied with external device, and charge device from speakers battery.There is a beep sound every 2 minutes and white LED will flash 2 time if low battery (under 3 4v)，It will be auto shut down if the voltage ofShows amount of power in battery. USB Portbattery (under 3.4v)，It will be auto shut down if the voltage of bluetooth less than 3.2V. When speaker is on but not connected to a cellphone (not in use ). There is no any beeps or sounds until the speakerhas not been in use for 29minutes and 50 seconds. then there are 3beeps, and then turn off immediately . If Audio cable or the USB outcable is plugged in, auto shut off will not happen.Charges external devices
Connect with the second cell phoneAfter the first cell phone connected with speaker .The secondcell phone start to connecting with speaker (Pairing method issame as the first cell phone):Press answer button for 5 secondsto go into pairing mode(The first cell phone is auto-disconnected with speaker at this moment ) .White LED will beflashes 1 time every 0.4 seconds.After connected.White LED willbe flashes 1 time every 5 seconds .There is a sound at the sametime when connection is made. After the second cell phoneconnected with speaker,then select the "connect" on setting ofthe first cell phone to connect with speaker.(No need to re-pairing again).then 2 cell phone is connecting with speaker atthe same time.When one of the cell phone on the line.The systemwill be automatically rejects the other calling from theCommon state LED flashes 1 time every 5 secondsIt will not auto shut down (all of our bluetooth products will not setting auto shut down if it has connect with a cell phone .user will think thatthere is problem of the bluetooth products if It will shut down after 30mins . and they need to switch on again )If the speaker is connected to an external speaker through the line out .and a phone call is comes in .You will hear the coming sound from 2 speaker . after you pick up the call .you will hear the sound from two speaker also . If speaker no power . The softare setting is :Plug into USB port on speaker with the USB charge cable supplied with external device, and charge device from speakers battery.There is a beep sound every 2 minutes and white LED will flash 2 time if low battery (under 3.4v)，It will be auto shut down if the voltage of bluetooth less than 3.2V.If speaker connect with cell phone .The software setting is :When speaker is on .and connected with a cell phone .and not playing music .It will always on (It will not lost bluetooth connection .unless it isout of the working distance .), If out of distance and returns into distance before power shut down, then signal will reconnect automaticallyyj gsecond(other) phone
If speaker No connect with cell phone . The software setting is :When speaker is on but not connected to a cell phone (not in use ). There is no any beeps or sounds untilthespeakerhasnotbeeninusefor29minutesand50seconds.thenthereare3beeps,andthenturnoffimmediately.If a 3.5mm cable or USB cable is incerted into the unit it will not enter power saving mode unless the battery is less than 3.2VNote：This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions:1. This device may not cause harmful interference and2. This device must accept any interference that is received, including any interference that may cause undesired operation.WARNING:Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authorityto operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following tow conditions: (1)this device may not cause interference, and(2) this device must accept any interference, includinginterference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables auxappareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre lefonctionnement.

Navigation menu