BRIGHT DRAGON TECHNOLOGY BH-03 Bluetooth® stereo Headset User Manual Manual

Download:
Mirror Download [FCC.gov]
Document ID	1840703
Application ID	GP5e+JoxfFGUTQ2Jx0dH/Q==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	11.53kB (144121 bits)
Date Submitted	2012-11-19 00:00:00
Date Available	2012-11-19 00:00:00
Creation Date	2012-11-15 11:40:52
Producing Software	Acrobat Distiller 7.0.5 (Windows)
Document Lastmod	2012-11-15 11:40:52
Document Title	Microsoft Word - Manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Administrator

User’s manual
BH-03
Bluetooth stereo Headset
SPECIFICATIONS
Model no
Bluetooth Profiles
Music Time
Standby Time
Charge Time
BH-03
HSP,HFP,A2DP,AVRCP
10 Hours
Up to 250 Hours
4~4.5 Hours
Ver.
Effective Range
Talk Time
Iuput
Bluetooth V2.1+EDR
10Meters
11Hours
DC : 5V/160mAh
Dimensions
14.5*10*6CM
About BH-03
BH-03 is a stereo headset with Bluetooth technology. It supports the following Bluetooth
profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile
Overview
10
+ key: Volume Up
> key :next song
– key: volume down
Built-in microphone
< key :last song
Bettery Indicator LED
11
Multifunction Buttom answer, end and
reject call, pause and play
Charging port
LED Indicator
Folding
Bettery Check
Charging the battery with USB cable
•
Step1: Insert USB charging cable into USB port of PC.
•
Step2: Connect charging cable with the charging port of headset.
•
When the red light is on, the headset is charging.
•
When the blue light is on, the headset is charged fully.
•
It takes about 3 hours to charge the headset fully.
Warning:
•
The battery is rechargeable.
•
First time charging : Before you use this Bluetooth headset, please charge the battery
of headset fully
How to use
A Switching on / off headset
Function
Operation
LED indicator
Indication tone
Switch on
Press and hold the
MFB for 3 seconds
Blue LED is on for 1
second
“Do Do Do” tone
Switch off
Press and hold the
MFB for 6 seconds
Red LED is on for 1
second
“Do Do DO” tone
B Pairing the headset with Bluetooth devices
A) How to enter pairing mode
Be sure BH-03 in power off status first. Press and hold the MFB for 6 seconds, till Red
and blue Led blink alternately, or you hear the indication “Do Do” twice come out. And then
release the MFB. The unit will become pairing mode.
B) Pairing the headset with Bluetooth mobile phone
Please make sure your mobile phone has Bluetooth function that can be used.
Specific pairing procedures were not the same with different mobile phone. Please refer to
your mobile phone manual for further information. Steps as follows:
a) Please keep the headset and mobile phone in the range of 1 meter when pairing.
b) Start the Bluetooth function of mobile phone and search the Bluetooth devices.
c) Make the headset enter into pairing mode (Please refer to “how to enter into pairing
mode”).
After searched, select “BH-03”in the Bluetooth device list.
a) According to indication, enter password or PIN No:”0000”, and press the key of” Yes”
or “confirmed”.
b) After successful pairing, select “BH-03” in the Bluetooth device list, and press
“connect”.
c) After successful connecting, the blue LED of the headset quickly blinks twice or three
times every 4 seconds.
Wearing the headset
The string of this headset is retractable, please adjust according to the actual use. Logo “L” of
headset represents left ear, Logo “R” of headset represents right ear. Please wear the headset
according to the indication of the Logo.
Making calls with the headset
Function
Status of headset
Operation
Voice dial
Standby mode
Press and hold MFB for 2s, release it till hearing
indication sound
Redial last
number
Standby mode
Short press MFB twice quickly
Volume up
Conversation
mode
Short press or long press + key. When the volume is
adjusted to max, you will hear an indication tone.
Volume
down
Conversation
mode
Short press or long press – key. When the volume is
adjusted to min, you will hear an indication tone.
Answer
calling
Ringing
Short press MFB
Reject calling Ringing
Press and hold MFB for 1s, and release it till hearing
indication sound
Warning: Excessive pressure from headphones can cause hearing loss.
Notes:
•
For some mobile phones, when you press the key of accepting on the phone, the
conversation will be sent to the mobile phone. At this time, you can switch the call to
headset by using the conversation switch button or through operating on the mobile
phone. Please refer to the instruction of your mobile phone for further information
Playing music
When the headset connects with the mobile phone or Bluetooth transmitter which supports
A2DP, you can enjoy music through headset wirelessly.
Function
Status of headset
Operation
Pause
Playing music
Short press MFB
Play
Pausing
Short press MFB
Last song
Playing music
Short press < key
Next song
Playing music
Short press> key
Volume up
Playing music
Short or long press + key. When the volume is
adjusted to max, you will hear an indication tone.
Volume down
Playing music
Short or long press – key. When the volume is
adjusted to min, you will hear an indication tone.
Notes: .
•
Remote control the function of last song/next song/pause, it needs your mobile phone
or Bluetooth transmitter supports AVRCP. Please refer to the instruction of your
mobile phone or Bluetooth transmitter. for further information.
LED indicator
A) Charging
LED indicator
Status of the headset
Red LED is on
Charging
Blue LED is on
Finish charging
B) In use.
LED Indicator
Status of the headset
Red and blue LEDs blink alternately
Pairing mode
Blue LED quickly blinks once every 2 seconds.
Not connected to a device
Blue LED gradually turns on and off
Conversation mode
Red LED blinks twice every 20 seconds
Low power
C）Bettery Indicator
Press Bettery Check, Led will on about 3 second.
Four Leds was On. It mean bettery is full, it can be use about 8~10 hours
Three Leds was On. It mean bettery is approaching 75%, it can be use about 5~7 hours
Two Leds was On. It means bettery is approaching 50%, it can be use about 3~5 hours
One Led was On. It means bettery is running out, please charge it.
Re-connecting to a Bluetooth device
A)
Automatic connecting
Every time the headset is switched on, it will connect to the nearest, and the last
connected device automatically.
B)
Manual connecting to last connected device
When the headset is in standby mode and doesn’t connect to any devices, short press
MFB button once, it will connect to last connected device automatically.
15.19 Labelling requirements.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
15.21 Information to user.
The users manual or instruction manual for an intentional or unintentional radiator shall caution the
user that changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
15.105 Information to the user.
(b) For a Class B digital device or peripheral, the instructions furnished the user shall include the
following or similar statement, placed in a prominent location in the text of the manual:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
WARNING
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0.5 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:11:15 11:40:52+08:00
Create Date                     : 2012:11:15 11:40:52+08:00
Format                          : application/pdf
Title                           : Microsoft Word - Manual.doc
Creator                         : Administrator
Document ID                     : uuid:9ca24daf-ea40-48d5-b369-c396de9ca7da
Instance ID                     : uuid:4c4e9dd0-bb5e-4e7f-9e15-40141a3abdb2
Page Count                      : 8
Author                          : Administrator

EXIF Metadata provided by EXIF.tools