BRK FAL-CON Wireless Door/Window Sensor User Manual M7U FAL CON

Download:
Mirror Download [FCC.gov]
Document ID	1774846
Application ID	H9lRIwmZQgoEWj4zLqNjcg==
Document Description	M7U-FAL-CON_User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	Yes
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.78kB (234793 bits)
Date Submitted	2012-08-27 00:00:00
Date Available	2012-08-27 00:00:00
Creation Date	2012-08-20 14:47:03
Producing Software	GPL Ghostscript 8.70
Document Lastmod	2012-08-20 14:47:03
Document Title	M7U-FAL-CON_User Manual.pdf
Document Creator	PDFCreator Version 0.9.9
Document Author:	Helen.Ma

INSTALLING YOUR SENSOR:
Refer to your ONELINK System Setup manual for instructions on how to
install your Wireless Contact Sensor.
QUICK START GUIDE
Door/Window
Contact Sensor
Technical Specifications
• LED indicator indicated functioning unit
• Operates on 2-AAA Alkaline batteries
• LED indicator when sensor is triggered
M08-0233-003 07/12
Frequency range: 915 MHz
INTRODUCTION
Congratulations on your purchase of the ONELINK
Door/Window Contact Sensor. It is constructed with UV
resistant ABS plastic allowing for indoor use. The sensor
works by creating a magnetic field between the sensor and
the magnetic contact. When there is a change in status,
either opening or closing, it is reported to the Wireless
System Gateway and an event is triggered.
Typical open air range (line of sight): 196 ft
Typical range indoors: 65 feet (20 m)
Dimensions:
Sensor — 1.106” x .678” x 3.544”
Contact — .655” x .667” x 1.960”
Operational temperature: 14˚ to 131˚ F
This is quick start guide for your ONELINK Contact Sensor.
For a full system set-up manual, please visit our website:
www.onelinkhome.com
TROUBLESHOOTING
Problem
LED does not light up
Solution
• Ensure the batteries are properly inserted with the correct polarity.
• Ensure you are using fully charged AAA batteries.
INSTALLATION
Your package contains the following items:
• 1 Door/Window Contact Sensor
• 1 Magnetic Contact
• 1 Antenna
• 1 Wall Mounting Kit
• 2 AAA Alkaline Batteries
DOOR/WINDOW & MAGNETIC
WALL
CONTACT SENSOR CONTACT
MOUNTING KIT
Problem
Events are not triggered
Solution
• Ensure the batteries are properly inserted with the correct polarity.
• Ensure you are using fully charged AAA batteries.
AAA ALKALINE
BATTERIES
Problem
Sensor continually sends an event
Solution
Ensure that you have the proper settings configured for the sensor.
For example, you have armed the sensor.
ANTENNA
The Wireless System Gateway must be installed before installing your
Contact Sensor. Consult the ONELINK System Setup manual for details.
FAQ
MOUNTING YOUR SENSOR:
1. Determine the desired location where you would
like to mount your sensor. Remove the mounting
clip from the back of the sensor by sliding it up
and off the device. Using the mounting holes as a
guide, drill two small holes using a 1/4” drill bit.
Insert supplied wall anchors into holes and secure
sensor to wall with supplied screws.
Can I place the sensor in a different room from the Wireless Gateway?
Yes, the sensor uses radio frequencies to communicate with the Gateway.
These frequencies can travel through objects such as walls, ceilings, and
floors.
How far away can the sensor be placed from the Wireless Gateway?
Typically 65 feet.
2. Attach the antenna to the top of the sensor.
Can I use the sensor on metal doors?
Yes, the sensor can be used on metal doors, doorframes and other
metal objects, though we recommend mounting on non-metal surfaces,
if possible, for the best reception.
3. Separate the front part of the sensor from the back to reveal the battery
compartment. Insert supplied batteries into the battery compartment by
matching each battery to the correct popularity. Reconnect the front and
back of the sensor and slide the sensor into place on the mounting clip.
How long will the battery last?
The batteries are expected to last up to 12 months. This will depend on
actual use and how often the Contact Sensor is triggered.
The LED indicator on the sensor is not on?
This indicates that the sensor has gone into hibernation mode to save
battery power. It will wake up when the sensor is triggered.
4. The Magnetic Contact should now be placed on the other side of the
object where you placed the sensor (typically the side that moves). Make
sure the contact aligns with the dots located on the top of the sensor and
the magnetic contact. The spacing between the sensor and the contact
should be between 1/10” and 1/2”. Securely attach the contact using
screws in the hardware kit. Remove the cover from the contact and insert
the screws through the holes on the top and bottom of the contact.
NOTE: In order to confirm that the Magnetic Contact is mounted within the
correct operating range, you may test the sensor by opening the door/window
and confirming that the LED blinks.
REGULATORY INFORMATION
LIMITED WARRANTY
ONELINK Door/Window Contact Sensor
FCC Notices:
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
BRK Brands, Inc., ("BRK") the maker of First Alert® brand products warrants
that for a period of one year from the date of purchase, this product will be
free from defects in material and workmanship. BRK, at its option, will repair
or replace this product or any component of the product found to be
defective during the warranty period. Replacement will be made with a
new or remanufactured product or component. If the product is no longer
available, replacement may be made with a similar product of equal or greater
value. This is your exclusive warranty.
This warranty is valid for the original retail purchaser from the date of initial
retail purchase and is not transferable. Keep the original sales receipt.
Proof of purchase is required to obtain warranty performance. BRK dealers,
service centers, or retail stores selling BRK products do not have the
right to alter, modify or any way change the terms and conditions of this
warranty.
This warranty does not cover normal wear of parts or damage resulting
from any of the following: negligent use or misuse of the product, use on
improper voltage or current, use contrary to the operating instructions,
disassembly, repair or alteration by anyone other than BRK or an authorized
service center. Further, the warranty does not cover Acts of God, such as
fire, flood, hurricanes and tornadoes or any batteries that are included with
this unit.
BRK shall not be liable for any incidental or consequential damages caused
by the breach of any express or implied warranty. Except to the extent
prohibited by applicable law, any implied warranty of merchantability or
fitness for a particular purpose is limited in duration to the duration of the
above warranty. Some states, provinces or jurisdictions do not allow the
exclusion or limitation of incidental or consequential damages or limitations
on how long an implied warranty lasts, so the above limitations or exclusion
may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights that vary from state to state or province to
province.
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Model: OLCONTACT
ICES-003 Statement
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables
aux appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes: (1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le fonctionnement.
Model: OLCONTACTA
How to Obtain Warranty Service
For customer service, technical support, and warranty claims, contact our
Customer Support Center at 1-800-323-9005 Monday - Friday, 7:30 am to
5:00 pm Central Standard Time.
Battery Life
For your ONELINK wireless devices that require batteries, use high-quality,
non-corrosive batteries designed for use in electronic equipment. Battery life
is up to one year with normal usage. Do not use rechargeable batteries in
any ONELINK device.
Registration
Register your product at:
www.onelinkhome.com
Battery Regulations:
•
Always use the exact batteries specified by this User’s Manual.
DO NOT use rechargeable batteries. For products requiring multiple
batteries, replace all batteries of a set at the same time. Do Not Mix
Old and New Batteries. Clean the battery contacts and also those of
the device prior to battery installation. Install batteries correctly with
regard to polarity (+ and -).
•
Keep battery out of reach of children. In the event a battery is
swallowed, immediately contact your poison control center, your
physician, or the National Battery Ingestion hotline at 202-625-3333
as serious injury may occur. Please dispose of or recycle used
batteries properly, following any local regulations. Consult your
local waste management authority or recycling organization to
find an electronics recycling facility in your area. DO NOT DISPOSE
OF BATTERIES IN FIRE. BATTERIES MAY EXPLODE OR LEAK.
© 2012 BRK Brands, Inc. All rights reserved.
Distributed by BRK Brands, Inc.
3901 Liberty Street Road, Aurora, IL 60504-8122
ONELINK® is a registered trademark of BRK Brands, Inc.
First Alert® is a registered trademark of the First Alert Trust used under license.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : 59c54af4-ecee-11e1-0000-6b5d89ff474c
Producer                        : GPL Ghostscript 8.70
Keywords                        : ()
Modify Date                     : 2012:08:20 14:47:03+08:00
Create Date                     : 2012:08:20 14:47:03+08:00
Creator Tool                    : \376\377\000P\000D\000F\000C\000r\000e\000a\000t\000o\000r\000 \000V\000e\000r\000s\000i\000o\000n\000 \0000\000.\0009\000.\0009
Document ID                     : 59c54af4-ecee-11e1-0000-6b5d89ff474c
Format                          : application/pdf
Title                           : \376\377\000M\0007\000U\000-\000F\000A\000L\000-\000C\000O\000N\000_\000U\000s\000e\000r\000 \000M\000a\000n\000u\000a\000l\000.\000p\000d\000f
Creator                         : \376\377\000H\000e\000l\000e\000n\000.\000M\000a
Description                     : ()
Author                          : Helen.Ma
Subject                         : 

EXIF Metadata provided by EXIF.tools