Brydge Global BRY1001A BRYDGEAIR(Bluetooth Keyboard) User Manual Front

BRYDGE GLOBAL BRYDGEAIR(Bluetooth Keyboard) Front

Users Manual

Getting to know your BrydgeAirCONNECTING YOUR BRYDGEAIR1Unfold the hinges to the vertical position. Place your iPad Air into the hinges with thehome button on the right-hand side.IMPORTANT BUTTONS2Power: Turns the keyboard on and o.Keyboard: Puts thekeyboard into pairing mode.Speakers: Turns speakers on and o and activates the pairing process.LOOKING AFTER THE BATTERY3To charge your BrydgeAir keyboard, connect it to any USB port using the cable provided.\|The backslash key on the right of the BrydgeAir keyboard doubles as the battery indicator.Battery IndicatorRed: Charging / Fully chargedBlue (ashing slowly): Low batteryFind more information at www.brydgekeyboards.comFCC ID:2ADRGBRY1001A
Pairing your BrydgeAirFind more information at www.brydgekeyboards.comIt is important to note that there are 2 separate pairing processes, one for the keyboard and the other for the speakers.PAIRING YOUR BRYDGEAIR FOR THE FIRST TIME4Turn the power button to the on position. On your iPad, go to Settings > Bluetooth (and ensure your bluetooth is turned on).Press and hold the keyboard button for 2 seconds (a blue light will appear on the keyboard).Select BrydgeAir Keyboard under bluetooth devices.PAIRING THE SPEAKERS FOR THE FIRST TIME5On your iPad, go to Settings > BluetoothPress and hold the speaker button for 4 seconds until you hear a 4-tone beep, followed quickly by another 2-tone beep.Select BrydgeAir Sound under your iPad Air’s bluetooth devices. (Settings > Bluetooth)Pairing is conrmed by a single-tone beep (initial pairing may take up to 5 seconds).TURNING THE SPEAKERS ON AND OFF6Press and hold the speaker button for 2 seconds until you hear the 4-tone beep.On: Press and hold the speaker button for 4 seconds.O:You can turn the speakers on and o to save battery.2014 Brydge Global Pte Ltd, All Rights Reserved.Patent PendingiPad® and Apple® are registered trademarks of Apple, Inc.The Bluetooth word, mark and logos are owned by Bluetooth SIG, Inc.Use of such marks by Brydge Global Pte Ltd is under license.The speakers will automatically re-connect with your iPad Air once turned back on.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Navigation menu