Brydge Global BRY500X BRYDGE Mini User Manual QSG Mini 1 2

BRYDGE GLOBAL BRYDGE Mini QSG Mini 1 2

User Manual

for iPad Mini1, Mini 2 & Mini 31) ChooseChoose from either theblack or white shims.2) InsertRemove the tape and insert the shims into the hinges. Note: Ensure the rubber foot push through the heel of the hinge.3) TestEnsure both hinges arealigned, insert your iPadthen remove it to make sure your iPad is held securely.4) AdjustTo get the right fit, remove the iPad and gently squeeze the hinge.Note: Repeat this process until the iPad is held firmly.AttachGetting Started2015 Brydge Global Pte Ltd, All Rights Reserved.iPad® and Apple® are registered trademarks of Apple, Inc.The Bluetooth word, mark and logos are owned by Bluetooth SIG, Inc.Use of such marks by Brydge Global Pte Ltd is under license.
Pair1) SwitchTurn your keyboard on by switching the left-hand button to the right. A greendot will appear.2) PressPut the keyboard into pairing mode by pressingand holding the right-hand button for 3 seconds. 3) SelectUnder Settings / Bluetooth, (on your iPad) select BrydgeAir - Mini 4) ConfirmYour iPad will indicateit is connected to the Brydge Keyboard.1) FlatA flashing blue light indicates the keyboard has less than 10% battery life left.2) InsertInset the supplied MICROUSB cable. 3) ChargeCharging is confirmed bya solid red light.4) ChargedYour keyboard is fully charged when the light turns off.ChargeNote: Charging takes up to3 hours. Note: Press the Fn buttonto access the secondary character on the keyboard!
FCC STATEMENT:This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and(2)This device must accept any interference received, including interference that may cause undesired operation.Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.Consult the dealer or an experienced radio/TV technician for help.RF warning statement:The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Navigation menu