BTC Korea Co NF-1800MA 18-inch LCD Monitor User Manual
BTC Korea Co Ltd 18-inch LCD Monitor
Users Manual
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
ATTACHMENT E.
- USER’S MANUAL
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
Page 1
User Guide
1) This equipment has been designed for normal use. It is certified to comply with Electron Wave Suitable
Registration. The user can use this equipment everywhere including residential areas.
2) Before using this equipment, the user should read and follow ' Safety Precautions’. It contains the 'Warranty
Material' for this equipment.
Page 2
Notice
This equipment is of first class quality. The LCD Panel is composed of more than 2 Million pixels and may have
some faulty pixels. LCD panels with a maximum of 10 faulty pixels are classified as products of good quality. This
standard is accepted by other manufacturers of LCD panels. An LCD panel without any faulty pixels is too expensive
for the average customer. Our “A” class panels have the least 10 faulty pixels. We guarantee that our panels will
provide the user with high quality performance. Therefore, no product exchanges or refunds will be made in regards
to this matter.
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
Page 3
Index
1. Initial Preparations
1) Safety Precautions... .....................................................................................1
2) Part Names............................................................................................3
3) Basic Accessories...............................................................................................5
2. Connection
Connecting to the PC.................................................................................................6
3. Product Description
Specifications..........................................................................................................7
4. Usage
Description of Monitor Functions...................................................................................................8
1) Description of Main Menu.......................................................................................................9
2) Description of Sub Menu.........................................................................................................11
5. Other
1) Troubleshooting.............................................................................................................................12
2) Warranty Material
3) Service
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
Page 4
1. Initial Preparations
1) Safety Precautions
* Observe the following basic rules for installation, usage, and service in order not to defeat the safeguards
incorporated into this monitor.
* Safety precautions are divided into Warning and Attention.
Warning: Breaking the basic rules can cause serious injury or death.
Attention: Breaking the basic rules can cause minor injury to yourself or damage to this equipment.
Save the manual near to future users after you read it.
& Do not open the monitor. Contact your dealer if the monitor is not operating properly.
& Do not place the monitor in direct sunlight or close to heaters.
=> Product malfunction or fire hazard may result.
& Do not drop metal objects like coins or hairpins into the monitor.
=> Electrical shock or fire hazard may result.
& Provide a secure connection to the power supply and do not use damaged power cords or plugs.
=> Electrical shock or fire hazard may result.
& Do not place the monitor in exposed places and near water.
=> Electrical shock, fire hazard, or malfunction may result.
& Do not clean the monitor with water or touch it with wet hands.
=> Electrical shock or fire hazard may result.
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
Page 5
1) Safety Precautions (cont.)
& During lightening storms, unplug the monitor from the wall outlet and do not touch it.
=> Electrical shock or fire hazard may result.
& Not using the monitor for hours, unplug the monitor from the wall outlet.
=> Dust may cause heat, fire, shock or short circuit.
& Install the monitor at the specified position from the wall to be well ventilated.
ð A rise in temperature of monitor may cause fire.
& Install the monitor in a stable place.
=> An unstable monitor may crash or fall. Personal injury, damage, or malfunction may result.
& When moving the monitor, turn it off and disconnect all cables and the plug.
=> Product damage, electric shock, or fire hazard may result.
& When disconnecting from the wall outlet, grab the plug.
=> Grabbing the cord may result in heat generation or fire hazard.
& Keep your eyes 50 cm away from the screen and 0~15° down in relation to the screen.
=> Viewing at too close a position and wrong posture can weaken your eyes.
& Before cleaning the monitor and LCD screen, disconnect it. Wipe it with a soft, clean cloth.
Do not use liquid or aerosol cleaners.
=> Chemical cleaners may fade, dissolve, or crack the monitor surface.
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
Page 6
2) Part Names
Front View
1. LCD Panel
2. Select Buttons: Pushing them, causes the Screen Adjusting Menu to appear. Use them to select menu items.
3. Adjust Buttons: Control the adjustment of menu items.
4. Power Button: Powers ON/OFF the monitor.
5. Power Indicator: Shows monitor status.
=> Green: Monitor operating normally.
=> Flickering: Monitor signal cable isn't connected (flickering at 3-second intervals)
6. Built-in Speaker
Page 7
Rear View
1. Power Connector: For connecting the power supply adaptor.
2. D-SUB Unit: For connecting the D-SUB signal cable.
3. SPEAKER Unit: For connecting speakers to the PC sound card.
Page 8
3) Basic Accessories
* Please make sure the following items are included with your monitor. If any items are missing,
contact your dealer.
Adaptor
D-SUB Signal Cable
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
LCD Monitor
Audio Cable
User Guide
Page 9
2. Connection
Connecting to the PC
Attention: Power OFF both the monitor and the PC before making any connections to the PC.
Power Connection: Connect the power plug into either a 220V or 110V wall outlet. (Free voltage)
PC Connection: Connect the monitor D-SUB connector and the PC using the D-SUB Signal Cable.
Speaker Connection: Connect the speaker connection of the monitor and the PC sound card using the Audio Cable.
Page 10
3. Product Description
Specifications
Resolution: 1280 X 1024 (SXGA)
Color: 16,777,216 colors, 8-bit
Pixel Pitch: 0.2805mm (H) X 0.2805mm (V)
Viewable Size: 18.1"
Viewing Angle: 85° (H) / 113° (V)
Contrast Ratio: 300:1
Screen Brightness: 200 cd/㎡
Built-in Speaker: 3W X 2 Stereo Type
Power Input: DC 12V, 5A
Electric Energy Consumption: 60W
Weight: 6.65Kg (Net) / 6.9Kg (Packed)
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
Dimensions: 443mm X 200mm X 453mm
Security Standard: FCC(USA), VCCI(JAPAN), CE(EUROPE), MIC(KOREA)
Page 11
4. Usage
Description of Monitor Functions
Basic Description - Front View
The function adjustment buttons of the NF-1800MA are divided into two on the left and two on the right.
Additional adjustments are not required because they have been factory adjusted. If the user wants to change the
default setup, follow the setting description below.
The two buttons on the left allow you to display the screen menu and to select items.
The two buttons on the right allow you to select individual items and adjust their levels.
1) Description of Main Menu.
Page 12
ON-SCREEN DISPLAY
Select ▲/▼/◀/▶ icons to be adjusted on the On Screen Display (OSD) main screen. To exit the OSD main menu,
the user can choose 'Save + Exit' or leave the buttons untouched for the set time (10 sec.).
The menu changes will then automatically be saved.
MAIN MENU
Main Menu options are as follows:
NOTE: Select 'LANGUAGE' on the OSD Main Menu to select your desired languages. Select using the ◀/▶
buttons.
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
OSD TO SUB MENU
Go to the 'To SUB Menu' using the ▲/▼ buttons, and choose one using the ◀/▶ buttons.
AUTO ADJUSTMENT
By selecting AUTO ADJUSTMENT using the ▲/▼ buttons, the monitor automatically adjust CLOCK, PHASE,
H-POSITION, and V-POSITION to the optimum condition.
CLOCK
By selecting CLOCK using the ▲/▼ buttons, the user can adjust the horizontal position using the ◀/▶ buttons.
PHASE
By selecting PHASE using the ▲/▼ buttons, the user can adjust screen noise using the ◀/▶ buttons.
Page 13
H-POSITION
By selecting H-POSITION using the ▲/▼ buttons, the user can move the whole image to the left using the ◀
button, or the whole image to the right using the ▶ button.
V-POSITION
By selecting V-POSITION using the ▲/▼ buttons, the user can move the whole image down using the ◀ button,
or the whole image up using the ▶ button.
OSD DISPLAY TIME
By selecting OSD DISPLAY TIME using the ▲/▼ buttons, the user can move the position of the Main Menu on
the screen using the ◀/▶ buttons (Time setting: 5~ 60 sec.).
OSD WINDOW LOCATION
By selecting OSD WINDOW LOCATION using the ▲/▼ buttons, the user can move the position of the Main
Menu on the screen using the ◀/▶ buttons. Main Menu is changeable 9 positions in the screen.
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
MODE SELECTION
By selecting MODE SELECTION using the ▲/▼ buttons, the user can select DOS mode using the ◀/▶ buttons.
Using the ◀/▶ buttons, the following menu will appear.
LANGUAGE
By selecting LANGUAGE using the ▲/▼ buttons and pushing the ◀/▶ buttons, the following menu will appear.
Select the desired language using the ▲/▼ buttons.
RESET
By selecting RESET using the ▲/▼ buttons and starting it using the ◀/▶ buttons. Starting erases all EEPROM
settings and the system reverts to the default settings.
Page 14
2) Description of Sub Menu
SUB MENU
The following diagram refers to the Sub Menu.
The user can adjust Brightness and Contrast by changing the Sub Menu Settings.
TO MAIN MENU
Move and select using the ▲/▼ buttons, and push the ◀/▶ buttons to come back to the main menu.
AUTO BALANCE
Move and select using the ▲/▼ buttons, and push the ◀/▶ buttons to adjust color balance and color contrast
automatically.
COLOR
Move and select using the ▲/▼ buttons, and push the ◀/▶ buttons to select 262K (262,000 colors) or 16M
(16,000,000 colors).
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
BRIGHTNESS
Move and select using the ▲/▼ buttons, and push the ◀/▶ buttons for the brightness of RGB color pattern.
Their changeable range is 0 to 100. The user can also adjust the Red, Green, or Blue color balance. Their changeable
range is 0 to 100.
CONTRAST
Move and select using the ▲/▼ buttons, and push the ◀/▶ buttons to adjust color contrast of RGB color patterns.
The user can also adjust the RED, GREEN and BLUE settings.
Page 15
5. Others
1) Troubleshooting
In case of trouble, check these items before calling the service center.
Page 16
2) Warranty Materials
Trouble Suggested Action Remedy
Screen is blank and power indicator is off.
Check power cable
connection.
Check power button.
Secure the connection.
Push the power button.
Screen is blank but power indicato
r is in green
mode.
Check the monitor signal
cable (D-SUB) connection.
Secure the connection of monitor signal cable
(D-SUB)
Display position and size is incorrect.
Check for correct
adjustment of display
position and size.
Start Auto adjustment in main menu.
Screen color isn't uniform and stable.
Check video card
resolution.
Change the video card settings or resolution.
Adjust color in SUB menu.
Display is too bright or too dark. Check monitor brightness. Adjust the brightness and contrast in SUB menu.
Any noise appearing in images or characters
are not clearly portrayed. Check PHASE icon
Decrease the noise using the PHASE icon in
main menu.
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
BTC Korea warrants to customers that this product is free from defects in workmanship and materials according to
Compensatory Regulations for Consumers.
This warranty is required for product service.
Product Name Model
Date of Purchase
(yyyy/mm/dd)
Serial No.
Consumer Address
Name Phone No.
Dealer Purchased from Dealer Phone No. Dealer Name
Warranty benefit is only in accordance with this material.
The user should immediately write down the date of purchase as the warranty period starts from the date of purchase.
In cases where we cannot check the exact date, the date of purchase is calculated as 6 months from the
manufacturing date.
This material is for domestic use only.
The user should keep this material because it may not be published again.
3) Service
Free Service
The user can get servicing from qualified service personnel within the warranty period.
l Warranty period is six months in cases where the user uses the product for business or unusual
circumstances or the product is industrial product.(including key component)
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
Warranty Details Warranty Type of Service
Within the
warranty period
After the warranty period
In usual circumstances where troubles appear within 10 days
after product purchase.
Product
Replacement
Repair Product does not operate due to the same
trouble up to three times
Free Repair Repair Charges
Product does not operate due to the same
trouble up to four times
Product
Replacement
Repair Charges
No Repair Product can’t be repaired even though
there are repair parts
Product
Replacement
Product replacement after deducting
Depreciation Cost
Product can’t be repaired because there
aren’t any repair parts
Product
Replacement
Product replacement after adding 10% of
Depreciation Cost
Service Charges
For the following, the user should pay for services within the warranty period:
When the product does not operate because of consumer fault.
l Product does not operate because the user attempted service by someone other than qualified service
personnel.
In case of trouble caused by modification by anyone other than qualified service personnel such as:
l Using the wrong voltage or a damaged power cord or plug.
l Monitor has been dropped.
l Improper adjustment of monitor options
l Liquid has been spilled on or into the monitor housing.
l Unauthorized product modification
For simple problems
l Where the service personnel can repair the product without opening the covers.
l Where the outside cables or option cards are reset.
l Where software is reinstalled.
l Where network or another company’s product usage is explained.
REPORT NO : HCT-F01-0701 FCC ID : LAKNF-1800MA DATE : JULY 11, 2001
HYUNDAI ELECTORONICS INDUSTRIES CO., LTD. CORP QA OFFICE /QUALITY MANAGEMENT TEAM
SAN 136-1, AMI-RI , BUBAL-EUP, ICHEON-SI,KYOUNKI-DO, 467-701,KOREA
TEL : +82 31 639 8518 FAX : +82 31 639 8525 www.hctec.co.kr
Other
l Where troubles are caused by accident, fire, lightening, other hazards, or acts of God.
l Where expendable supplies (like lamps) are used up.