BTE Technologies DAQRETROFIT Strength measurement equipment. User Manual FCC DAQ Retrofit indd

Download:
Mirror Download [FCC.gov]
Document ID	631841
Application ID	fMD9egStdB/P7u5MHNvEzg==
Document Description	FCC Manual Addendum
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	1.67kB (20854 bits)
Date Submitted	2006-02-27 00:00:00
Date Available	2006-02-27 00:00:00
Creation Date	2006-02-06 15:56:09
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2006-02-06 15:56:09
Document Title	FCC - DAQ Retrofit.indd
Document Creator	PScript5.dll Version 5.2.2
Document Author:	anicolaisen

Class A Digital Device
This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with
the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference
in which case the user will be required to correct the interference at his own expense.
Do Not Change of Modify Any Components
Any changes or modifications, especially to the wireless components, not expressly
approved by BTE Technologies, Inc. could void the user ’s authority to operate the
equipment.
Acceptable Antenna(s)
This device has been designed to operate with the antenna(s) listed below and having
a maximum gain of 2.7 dBi. Antennas not included in this list or having a gain greater
than 2.7 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
Acceptable antenna(s) include:
1. Linx Technologies 916MHz 1/4 Wave Whip Antenna (ANT-916-CW-QW)
To reduce potential radio interference to other users, the antenna type and its gain
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that permitted for successful communication.
Preventing interference between the wireless components
Interference, which can result in an inability to acquire accurate data, may occur in
the following scenarios:
a. The antennas of any wireless components are within 3 feet of each other (e.g.
the antenna on the new DAQ Box is within 3 feet of the antenna on the Heart Rate
Transmitter).
b. There is not a direct line of sight between the antennas of the wireless components. In addition, any metal that is between the antennas will cause interference.
You may prevent interference by maintaining your system in the following manner:
a. Do not allow the Heart Rate Transmitter to fall on the floor.
b. Regularly check the USB cable and power cable that are attached to the new
DAQ Box.
c. Verify the antennas are in good working order and properly secured.
You may also prevent interference by using the following guidelines:
a. Place the new DAQ Box in a location that ensures the antenna of the new DAQ
Box will always be at least 3 feet from the antenna on the Heart Rate Transmitter.
b. Verify there is a direct line of sight between the DAQ Box antenna and the Heart
Rate Transmitter antenna.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 1
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:1629fbae-6b6b-43c2-9228-806c271dc74d
Producer                        : Acrobat Distiller 6.0 (Windows)
Create Date                     : 2006:02:06 15:56:09-05:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2006:02:06 15:56:09-05:00
Document ID                     : uuid:8368c3d5-4997-4445-9fac-65fe7a3bde82
Format                          : application/pdf
Title                           : FCC - DAQ Retrofit.indd
Creator                         : anicolaisen
Author                          : anicolaisen

EXIF Metadata provided by EXIF.tools