BUFFALO 04600046-1 Wireless Notebook Adapter User Manual WLI CB G54S Manual indd

BUFFALO INC. Wireless Notebook Adapter WLI CB G54S Manual indd

User Manual

User Manual125* High Speed Mode™Wireless Notebook AdapterWLI-CB-G54Swww.buffalotech.com/wireless125* HiWireless Notebook
2Introduction802.11g Wireless Notebook AdapterWindows XP – Installation & Configuration1. Installing the Wireless Notebook Adapter Drivers:◗ Insert the AirNavigator CD into the CD-ROM drive of the PC. The Air Navigator Setup Wizard launches automatically. If the Air Navigator Setup Wiz-ard does not launch automati-cally, launch the wizard manu-ally by selecting Start>>Run to open the Run dialog box. Enter D:\Setup.exe in the Open field. D: represents the letter as-signed to the CD-ROM drive. If another letter is assigned to the CD-ROM drive, your command should refelect that difference. Click the OK button to launch the wizard.
3◗ Select Install Wireles Adapter. Click the OK button to begin the installation pro-cess. ◗ Review the Software License Agreement. Click the Yes but-ton to confirm your agreement with the terms and continue installing the Wireless PCI Adapter drivers. Click the No button to abort the installation process.Introduction
4Introduction2. Installing the Wireless Notebook Adapter:◗ Power on the notebook PC and let it boot into Windows. Firmly insert the Wireless Notebook Adapter into an available CardBus slot. CardBus slots are located on one side of the notebook. Please consult the Notebook Manufacturer's documentation for CardBus installation instruc-tions. Once the Wireless Notebook Adapter is installed correctly, then the Found New Hardware Wizard will launch automatically. If the Found New Hardware Wizard does not launch, turn off the computer, remove the Wireless Notebook Adapter, restart the Notebook, and reinsert the Wireless Notebook Adapter after Windows has restarted. ◗ Select Install the software automatically. Click the Next button.
5Introduction◗ Select the driver you want to install. If multiple drivers are listed, select the most recent driver version. Click the Next button.◗ If a window opens, stating that your driver does not pass Windows Logo testing, click the Continue Anyway button. When the Wireless 54Mbps Notebook Adapter is successfully in-stalled, click the Finish button. Restart your PC if prompted.
63. Configuring Wireless Zero Configuration Service:◗ If the Wireless Zero Configuration Service is activated, Windows will scan for available wireless access points once the Wireless PCI Adapter is properly installed. If Windows detects one or more access points, a network-ing icon appears on the task bar. One or more wireless networks are available appears as a caption accompany-ing the icon.■ Note: If the Wireless Zero Configuration Service is not functioning, select Start>Control Panel>Administrative Tools>Services. Select Automatic in the Startup Type field of Wireless Zero Configuration Service to enable the Wireless Zero Configuration Service. The default value of Wireless Zero Configuration Service is Automatic.◗ Right click the networking icon in the taskbar and se-lect View Available Wireless Networks to display a list of available wireless networks. Select an access point network name or SSID and click the Connect button to establish a connection. You may need to check the box indicating you are connecting to an unsecured network. See Page 7 if you need to enter an SSID network name or WEP/WPA encryption key.Introduction
7◗ Click the Advanced button to enter an SSID network name or WEP/WPA encryption key, if either is necessary. To add an SSID network name that is not available, click the Add button.Introduction
8Introduction◗ To configure a WEP/WPA encryption key, select the ap-propriate wireless network and click the Configure button.◗ From the pull down menu, select the appropriate Net-work Authentication and Data Encryption for the wireless network. Enter and confirm the Network Key and Key Index. Click the OK button when finished.■ Note: Buffalo Technology recommends that users of the Wireless Zero Configuration Service upgrade to the latest version freely available at: http://www.microsoft.com.For advanced support in using Window’s XP’s Wireless Zero Configuration Service, refer to the Buffalo Support Web Site: http://www.buffalotech.com/wireless/supportSkip to Page 12 if you are not using Windows XP or prefer not to use Windows XP's Wireless Zero Configuration Service.
9Installation / SetupWindows 98/ME/2000Installation & Configuration1. Installing the Wireless Notebook Adapter:◗ Power on the notebook PC and let it boot into Windows. Firmly insert the Wireless Notebook Adapter into an available CardBus slot. CardBus slots are located on one side of the notebook. Please consult the Notebook Manufacturer's documentation for CardBus installation instructions. Once the Wireless Notebook Adapter is installed correctly, then the Found New Hardware Wizard will launch automatically. If the Found New Hardware Wizard does not launch, turn off the computer, remove the Wireless Notebook Adapter, restart the Notebook, and reinsert the Wireless Notebook Adapter after Windows has restarted.
10Installation / Setup2. Installing the Wireless Notebook Adapter-Drivers:◗ Insert the AirNavigator CD. Click Next at the Welcome to the Found New Hardware Wizard. Select Search for a suitable driver for my device. Click the Next button to continue.◗ Select only the CD-ROM drives checkbox, and clear any other checkboxes that are selected. Click the Next button to continue.
11Installation / Setup◗ Windows will display a driver you can use with the Wireless Notebook Adapter. Click the Next button to continue.◗ Windows 2000: If the Digital Signature Not Found page opens, informing that no digital signature exists for the driver you are installing, click the Yes button to continue the installation process. When the Wireless Desktop PCI Adapter is successfully installed, click the Finish button. Restart your computer if prompted.See the Installing Client Manager section to install the Client Manager.
12Client ManagerUse Client Manager to configure your wireless network. Use Client Manager to survey and connect to available access points, enable and use WEP encryption, and create connection profiles.■ Note: Client Manager does not function properly if the Windows XP Wireless Zero Configuration Service is enabled.Installing Client Manager◗ Insert the AirNavigator CD. The AirNavigator dialog box will open automati-cally. If the AirNavigator dialog box does not open automatically, select Start»Run and enter D:\Setup.exe in the Open field to open the dialog box manually. D: represents the letter as-signed to the CD-ROM drive. If another letter is assigned to the CD-ROM drive, your command should reflect that difference. Click the OK but-ton. Select Install Client Manager to launch the InstallShieldWizard.◗ Once the InstallShield Wizard launches, click the Next button to begin the software installa-tion.Client Manager
13Client Manager◗ Once the Installer Wizard launches, click the Next button to begin the software installation.◗ Press I Agree to accept the license agreement and continue the installation process.
14Client Manager◗ Press the OK button to finish and close the installation program.◗ Press the Exit button to exit the Client Manager installation utility.◗ The Buffalo Client Manager is now installed and running, right clicking on its icon (the black notebook icon) will allow you to begin using it.
15Client Manager ConfigurationUse Client Manager to configure your wireless network. To assist in configuring your wireless network, Client Manager consists of the Status page, the Survey page, and the Profiles page. You can access each page by clicking the corresponding button on Client Manager. In addition to these pages, several dialog boxes are available to meet specialized configuration needs. You can access the Edit Profile dialog box, New Profile dialog box, IP Configuration dialog box, or WEP Configura-tion dialog box using the Client Manager pages. Status PageClick the Status button to open this page. By default, this page is displayed when you start Client Manager. This page displays the status of the connection between the wireless adapter and another wireless device. This page only displays connection information no changes to the connection can be made from this screen.This page includes the following components:• Network Type – Displays what mode the network device is in. Ad-Hoc or Infrastructure are the available modes. Client Manager Configuration
16Client Manager Configuration• Rate – The speed that the two wireless clients are communicating at. If the Client Manager is not connected to a remote wireless device (access point or another client) then no rate will be displayed.• Channel – The channel that the two wireless clients are communicating at. If the Client Manager is not connected to a remote wireless device (access point of another client) then no channel will be displayed. The available channels for use are 1-11.• Security– The type of encryption that the two wireless clients are communicating with. If the Client Manager is not connected to a remote wireless device (access point of another client) then ‘No Encryption’ will be displayed.• IP Address – The IP address of the machine the Client Manager is installed on. If the Client Manager is not connected to a remote wireless device (access point of another client) or is not connected to a network with DHCP, then no IP address will be displayed.• MAC Address – The MAC address of the wireless client device inside the computer Client Man-ager is installed on. If no wireless device is present in the computer, then no MAC Address will be displayed.• Signal Strength – Displays the strength of the signal. Signal Strength is based on the peak signal level the wireless adapter receives from the wireless device to which it is connected. Next to the signal level is the wireless hardware type that the computer has available.
17Client Manager ConfigurationSurvey PageClick the Survey button to open this page. Use this page to survey the area, display available ac-cess points, and connect to available access points.This page includes the following components:• Wireless SSID – Displays the SSID associ-ated with each available access point. The SSID is the unique network name that func-tions as an identifier for your wireless devices. All wireless devices on a network must use identical SSIDs to successfully associate with other devices on the network. buffalo_test is an example of a valid SSID.• Mode – Displays the mode/rate set that the remote wireless device is offering.• Key – Displays whether the wireless net-work is using any sort of encryption.Press the ‘Connect’ button to connect to a listed SSID, or press the ‘Refresh’ button to perform another survey and update the survey list.
18Client Manager ConfigurationOnce the ‘Connect’ button is pressed, you will be prompted to enter any encryption related infor-mation.The ‘Acquire IP automatically’ checkbox tells the cli-ent device to obtain an IP automatically from a DHCP server. This is the recommended setting.The ‘Encryption’ drop down list allows you to select the type of encryption for the network. By default the proper encryption type should already be selected. In the event that no encryption is used, leave the ‘No Encryption’ option selected.The ‘Encryption Key’ is where the actual key required by the wireless network must be inputted. Please consult your wireless access point or router’s documentation for proper input of the encryption keys. Some wireless networks may require you to enter multiple keys, in this event, four separate fields are available for encryption keys.The ‘Save settings as a profile’ option will store this wireless network in your profiles. This means you will automatically connect to this network when inside its range. This settings is recommended if you plan on using this wireless network more than once.
19Profiles PageClick the Profiles button to open this page. Use this page to access your profiles. Profiles allow you to save the information associated with a specific wireless network so you can quickly and easily connect to that network when you are in that location. The Profiles page allows you to add, delete, and edit your profiles, as well as import and export data.• Connect – Click the Connect button to con-nect to the selected profile and return to the ‘Status’ page.• Edit – Click the Edit button to edit the se-lected profile’s settings. The Edit button also allows you to delete a profile no longer used or required.• Add – Click the Add button to add a profile manually. You will need important information such as SSID, encryption settings, and network type.Client Manager Configuration
20New Profile Dialog BoxUse this dialog box to create a new profile.Client Manager Configuration• Profile Name – Enter the name you want to associate with the new profile.• Network Type – Select the network mode you want to associ-ate with the new profile. Select Infrastructure if your network consists of both wired and wireless devices that communicate through a central device, such as an access point. Select Ad-hoc if your network consists of only wireless devices that communicate with each other directly.• Network Name SSID – Enter the SSID of your network. The SSID is the unique network name that functions an identifier for your wireless devices. All wireless devices on a network must use identical SSIDs to successfully associate with other devices on the network. myssid is an example of a valid SSID. • Channel – Displays the channel associated with the new profile. The channel indicates what range of frequencies the radio waves emitted by the wireless device are occupying. Devices that meet 802.11b and 802.11g standards can use channels 1-11 within the 2.4 GHz spectrum.• Encryption Type – Displays the types of encryptions available. Once selected, you will be required to enter the Encryption Key Number and the Encryption Key as well. For the Encryp-tion Key Number, it is recommended to use 1 unless specified to by an administrator.• OK – Click the OK button to save your specifications and return to the Profiles page.
21Client Manager ConfigurationAdvanced Profile Options• Network Tab – Displays the network information tab. A static IP can be specified for this wire-less profile here. It is not recommended to change any of these settings unless specified by an administrator.• Browser Tab – Displays settings to change your browser preferences for this wireless profile. A specific home page can be specified when connected to this wireless profile as can specific proxy server addresses.• Printers Tab – Displays the printers tab. A specific default printer can be associated to this pro-file. Thus, when connected to this profile, a specific printer will be used as the default printer.• Network Tab – Displays the network information tab. A static IP can be specified for this wire-less profile here. It is not recommended to change any of these settings unless specified by an administrator.• OK – Click the OK button to save your specifications and return to the Profiles page.• AOSS Icon – The AOSS icon is used to launch AOSS client requests for AOSS communication. Inside your wireless client’s box, an AOSS supplement guide is present. This guide leads to step-by-step instructions on using the AOSS icon.
22Antenna Information The WLI-CB-G54S is manufactured with two omnidirectional antennas.
23Wireless Zero ConfigurationWireless Zero Configuration Service (Windows XP)Windows XP offers the Wireless Zero Configuration Service to support 802.11b and 802.11g wire-less networking. This service automatically polls the area for available wireless access points. If an available wireless access point is found, Windows attempts to connect to the access point. If no available wireless access points are found, you must manually add the access points.■ Note: The Wireless Zero Configuration Service and Client Manager do not function properly together. If you want to use Client Manager, you must disable the Wireless Zero Configuration Service. Enabling the Wireless Zero Configuration ServiceSelect Start»Control Panel»Administrative Tools»Services to open the Services window. Select Automatic in the Startup Type field of Wireless Zero Configuration Service to enable the Wireless Zero Configuration Service.■ Note: The default Startup Type value of Wireless Zero Configuration Service is Automatic. Disabling the Wireless Zero Configuration ServiceSelect Start»Control Panel»Administrative Tools»Services to open the Services window. Select Disabled in the Startup Type field of Wireless Zero Configuration Service to disable the Wireless Zero Configuration Service.
24SpecificationsWireless LAN Interface Standards Compliance IEEE802.11gCommunication Protocol Direct Sequence Spread Spectrum (DS-SS), Half DuplexFrequency Range 2.412-2.462MhzTransmission Rate 802.11g: 1, 2, 5.5, 11, 18, 24, 36, 48, 54Mbps (Auto)Access Mode Infrastructure mode, Ad-HocSecurity 128/64 Bit WEP, WPA, 802.1x, WPA-PSK, TKIP, AESOthersInterface CardBus Power Consumption 1550mwEnvironmental Operation 0-55ºc, 20-80% (non-condensing)
25SpecificationsCommunication RangeSpeed Indoor Outdoor54Mbps 165 ft. (50m) 525 ft. (160m)11Mbps 300 ft. (90m) 1310 ft. (400m)1Mbps 375 ft. (115m) 1750 ft. (550m)All distances are estimated. Wireless connections may be affected as physical conditions and circumstances vary.
26Troubleshooting / FAQTroubleshooting / FAQUse this section to locate answers to frequently asked questions.What should I do if I already have a version of Client Manager on my PC? Update your Client Manager to the version on the CD. If you do not update your Client Manager, there could be a loss of functionally, as some versions of Client Manager will not work properly with the G54 Wireless 54Mbps Notebook Adapter. Before updating Client Manager, you must uninstall all previous versions of Client Manager. To update your Client Manager, load the Air Navigator CD and select Install Client Manager.Why won't all my network clients work? Some operating systems support only a limited number of network clients.Windows 98/Me: These operating systems support only four network clients. If you install more than four network clients, only the first four clients you install will work.Will Client Manager support all operating systems? Client Manager and the Wireless Notebook Adapter currently support only Windows 98/ME/2000/XP. They do not currently support Windows NT, Mac OS, or Linux. For more information, refer to the Mac OS and Linux page in the Troubleshooting section of this help file.
27Troubleshooting / FAQWhy won't Client Manager function properly? Windows XP – The Wireless Zero Configuration Service conflicts with Client Manager. Select Start»Control Panel»Administrative Tools»Services to open the Services window. Select Dis-abled in the Startup Type field of Wireless Zero Configuration Service to disable the Wireless Zero Configuration Service.I have more than one Air Navigator CD. Do I need more than one CD? No. You receive the same Air Navagator CD with each Buffalo Technology access point and wire-less adapter. The CDs are identical and you only need one copy.
2810BaseT or 100BaseTx: 802.3 based Ether-net network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps. 802.1x: The standard for wireless LAN authenti-cation used between an AP and a client. 802.1x with EAP will initiate key handling. Ad-Hoc Network: The wireless network based on a peer-to-peer communications session. Also referred to as AdHoc. Bandwidth: The transmission capacity of a computer or a communication channel, stated in Megabits per second (Mbps). BSS (Basic Service Set): An 802.11 network-ing framework that includes an Access Point. Bus Mastering: A system in which the speci-fied Input/Output device (e.g. NIC Card) can perform tasks without the intervention of the CPU. Client: A PC or workstation on a network. Cross-Over Wiring: A UTP cable that has its transmit and receive pair crossed to allow com-munications between two devices. DCE (Data Communications Equipment): Hardware used for communication with a Data Terminal Equipment (DTE) device. Default Gateway: The IP Address of either the nearest router or server for the LAN. Default Parameter: Parameter set by the manufacturer. Destination Address: The address portion of a packet that identifies the intended recipient station. DHCP (Dynamic Host Configuration Pro-tocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device con-nected to it, and retrieves the address when the device becomes dormant for a period of time. DNS (Domain Name System): System used to map readable machine names into IP ad-dresses Glossary
29Driver: Software that interfaces a computer with a specific hardware device. DSSS (Direct Sequence Spread Spectrum): Method of spreading a wireless signal into wide frequency bandwidth. DTE (Data Terminal Equipment): Device that con10BaseT or 100BaseTx: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps. 802.1x: The standard for wireless LAN authenti-cation used between an AP and a client. 802.1x with EAP will initiate key handling. Ad-Hoc Network: The wireless network based on a peer-to-peer communications session. Also referred to as AdHoc. Bandwidth: The transmission capacity of a computer or a communication channel, stated in Megabits per second (Mbps). BSS (Basic Service Set): An 802.11 network-ing framework that includes an Access Point. Bus Mastering: A system in which the speci-fied Input/Output device (e.g. NIC Card) can perform tasks without the intervention of the CPU. Client: A PC or workstation on a network. Cross-Over Wiring: A UTP cable that has its transmit and receive pair crossed to allow com-munications between two devices. DCE (Data Communications Equipment): Hardware used for communication with a Data Terminal Equipment (DTE) device. Default Gateway: The IP Address of either the nearest router or server for the LAN. Default Parameter: Parameter set by the manufacturer. Destination Address: The address portion of a packet that identifies the intended recipient station. DHCP (Dynamic Host Configuration Pro-tocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device con-Glossary
30nected to it, and retrieves the address when the device becomes dormant for a period of time. DNS (Domain Name System): System used to map readable machine names into IP ad-dresses Driver: Software that interfaces a computer with a specific hardware device. DSSS (Direct Sequence Spread Spectrum): Method of spreading a wireless signal into wide frequency bandwidth. DTE (Data Terminal Equipment): Device that controls data flowing to and from a computer. Dynamic IP Address: An IP address that is automatically assigned to a client station in a TCP/IP network, typically by a DHCP server. ESS (Extended Service Set): A set of two or more BSSs that form a single sub-network. ESS-ID is user identification used in the ESS LAN configuration. Ethernet: The most widely used architecture for Local Area Networks (LANs). It is a shared-media network architecture. The IEEE 802.3 standard details its functionality. Ethernet cable: A wire similar to telephone cable that carries signals between Ethernet devices. File and Print Sharing: A Microsoft application that allows computers on a network to share files and printers. Firmware: Programming inserted into pro-grammable read-only memory, thus becoming a permanent part of a computing device. Frame: A fixed block of data, transmitted as a single entity. Also referred to as packet. Full-Duplex: To transmit on the same channel in both directions simultaneously. Gbps (Giga Bits per second): One billion bits per second. Half-duplex: To transmit on the same channel in both directions, one direction at a time. Glossary
31LED (Light Emitting Diode): The lights on a hardware device representing the activity through the ports. MAC (Medium Access Control) Address: A unique number that distinguishes network cards. Mbps (Mega Bits Per Second): A measure-ment of millions of bits per second. MDI/X (Media Dependent Interface/Cross-over): Port on a network hub or switch that crosses the incoming transmit lines with the outgoing receive lines. MHz (MegaHertz): One million cycles per second. MIB II: A database containing performance information and statistics on each device in a network. MIPS (Million Instructions Per Second): A measurement of processing speed. Hub: A device which allows connection of com-puters and other devices to form a LAN. IEEE (Institute of Electrical and Electronics Engineers): The professional organization which promotes development of electronics technology. IP (Internet Protocol) Address: A unique 32-binary-digit number that identifies each sender or receiver of information sent in packets. Infrastructure: A wireless network or other small network in which the wireless network devices are made a part of the network through the Access Point. ISP (Internet Service Provider): A company that provides access to the Internet and other related services. IV (Initialization Vector): The header section of a message packet. LAN (Local Area Network): A group of com-puters and peripheral devices connected to share resources. Glossary
32NAT (Network Address Translation): An inter-net standard that enables a LAN to use one set of IP addresses for internal traffic and a second set for external traffic. NIC (Network Interface Card): An expansion card connected to a computer so the computer can be connected to a network. Packet: A block of data that is transferred as a single unit, also called a frame or a block. Packet Filtering: Discarding unwanted net-work traffic based on its originating address or its type. PCI (Peripheral Component Interconnect): A bus that is connected directly to the CPU. PCMCIA (Personal Computer Memory Card International Association) Card: Remov-able module that adds features to a portable computer. Ping (Packet Internet Groper): An Internet utility used to determine whether a particular IP address is online. Plug and Play: Hardware that, once in-stalled (“plugged in”), can immediately be used (“played”), as opposed to hardware that requires manual configuration. PoE (Power over Ethernet): A mechanism to send DC power to a device using a CAT5 Ethernet cable. PPPoE (Point-to-Point Protocol over Ether-net): A specification for connecting users on an Ethernet line to the Internet through a common broadband medium. Protocol: A standard way of exchanging infor-mation between computers. RADIUS (Remote Authentication Dial In User Service): A server that issues authentication key to clients. RAM (Random Access Memory): Non-perma-nent memory. Repeater Hub: A device that collects, strength-ens and transmits information to all connected Glossary
33devices, allowing the network to be extended to accommodate additional workstations. RC4: The encryption algorithm that is used in WEP. RJ-45 connector: An 8-pin connector used between a twisted pair cable and a data trans-mission device. ROM (Read Only Memory): Permanent memory. Router: Device that can connect individual LANs and remote sites to a server. Roaming: The ability to use a wireless device while moving from one access point to another without losing the connection. Script: A macro or batch file containing instruc-tions and used by a computer to perform a task. Server: Any computer that makes files or peripheral devices available to users of the network and has a resident Network OS. SMTP (Simple Mail Transfer Protocol): The protocol used to define and deliver electronic mail (E-mail) from one location to another. SNMP (Simple Network Management Proto-col: An application layer protocol that outlines the formal structure for communication among network devices. Static IP Address: A permanent IP address is assigned to a node in a TCP/IP network. Also known as global IP. STP (Shielded Twisted Pair): Twisted Pair cable wrapped in a metal sheath to provide ex-tra protection from external interfering signals. Subnet Mask: An eight-byte address divided into 4 parts separated by periods. TCP/IP (Transmission Control Protocol/In-ternet Protocol: Protocol used by computers when communicating across the Internet or Intranet. TFTP (Trivial File Transfer Protocol): Simple form of FTP (File Transfer Protocol), which Glossary
34Uses UDP (User Datagram Protocol), rather than TCP/IP for data transport and provides no security features. TKIP (Temporal Key Integrity Protocol): An encryption method replacing WEP. TKIP uses random IV and frequent key exchanges. Topology: The shape of a LAN (Local Area Network) or other communications system. Twisted Pair: Cable that comprises 2 or more pair of insulated wires twisted together. UDP (User Datagram Protocol): A com-munication method (protocol) that offers a limited amount of service when messages are exchanged between computers in a network. UDP is used as an alternative to TCP/IP. Uplink: Link to the next level up in a communi-cation hierarchy. UTP (Unshielded Twisted Pair) cable: Two or more unshielded wires twisted together to form a cable. WAN (Wide Area Network): A networking sys-tem covering a wide geographical area. WEP (Wired Equivalent Privacy): An encryp-tion method based on 64 or 128-bit algorithm. Web Browser: A software program that allows viewing of web pages. Wi-Fi (Wireless Fidelity): An organization that tests and assures interoperability among WLAN devices. Wire Speed: The maximum speed at which a given packet can be transferred using Ethernet and Fast Ethernet standard specifications. WLAN (Wireless LAN): A LAN topology using wireless devices. VPN (Virtual Private Network): A security method to connect remote LAN users to a cor-porate LAN system.Glossary
35Federal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution: To assure continued compliance, (example - use only shielded interface cables when connecting to computer or peripheral devices). Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.FCC / CE Information
36IMPORTANT NOTE:FCC RF Radiation Exposure Statement:This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.R&TTE Compliance StatementThis equipment complies with all the requirements of the DIRECTIVE 1999/5/EC OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of 9 March 1999 on radio equipment and telecommunication terminal Equipment and the mutual recognition of their conformity (R&TTE). The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal Equipment and Satellite Earth Station Equipment) As of April 8, 2000.SafetyThis equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment.FCC / CE Information
37EU Countries intended for useThe ETSI version of this device is intended for home and office use in Austria, Belgium, Denmark, Finland, France (with Frequency channel restrictions), Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Norway, The Netherlands, Portugal, Spain, Sweden, Switzerland and United Kingdom.The ETSI version of this device is also authorized for use in EFTA member states Iceland, Liechtenstein, Norway and Switzerland.EU Countries Not intended for useNone.Potential restrictive useFrance: Only channels 10,11,12, and 13.FCC / CE Information
38Warranty InformationBuffalo Technology (USA), Inc. products comes with a two-year limited warranty from the date of pur-chase. Buffalo Technology (USA), Inc. warrants to the original purchaser the product; good operating condition for the warranty period. This warranty does not include non-Buffalo Technology (USA), Inc. installed components. If the Buffalo product malfunctions during the warranty period, Buffalo Technol-ogy (USA) Inc. will, replace the unit, provided the unit has not been subjected to misuse, abuse, or non-Buffalo Technology (USA), Inc. authorized alteration, modifications or repair. All expressed and implied warranties for the Buffalo Technology (USA) Inc. product line including, but not limited to, the warranties of merchantability and fitness of a particular purpose are limited in duration to the above period. Under no circumstances shall Buffalo Technology (USA), Inc. be liable in any way to the user for damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use the Buffalo products. In no event shall Buffalo Technology (USA), Inc. liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. Buffalo Technology (USA), Inc. does not offer refunds for any product.@ 2004 Buffalo Technology (USA) Inc.
39Contact InformationADDRESS Buffalo Technology (USA), Inc.4030 West Braker Lane, Suite 120Austin, TX 78759-5319GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CSTDirect: 512-794-8533Toll-free: 800-456-9799 Fax: 512-794-8520Email: sales@buffalotech.comTECHNICAL SUPPORT North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada). Toll-free: (866) 752-6210 Email: info@buffalotech.com
40Technical Support is available 24 hours a day, 7 days a week (USA / Canada)Toll-Free: 866-752-6210 email: info@buffalotech.com©2004, Buffalo Technology (USA), Inc. 4030 W. Braker Ln. Suite 120Austin, Texas 78759Tel: 800-456-9799Fax: 512-794-8606

Navigation menu