BUFFALO 04610020-0 Wireless LAN Router using DSSS technique User Manual

BUFFALO INC. Wireless LAN Router using DSSS technique

User Manual

Download: BUFFALO 04610020-0 Wireless LAN Router using DSSS technique User Manual
Mirror Download [FCC.gov]BUFFALO 04610020-0 Wireless LAN Router using DSSS technique User Manual
Document ID1020507
Application IDo1Hg/wPghrcLHX7wd7tX6A==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize16.85kB (210682 bits)
Date Submitted2008-10-24 00:00:00
Date Available2008-10-24 00:00:00
Creation Date2008-09-08 10:06:19
Producing SoftwareDocuCentre-II C4300
Document Lastmod2008-09-08 13:20:34
Document TitleUser Manual
Document CreatorDocuCentre-II C4300

Quick Setup Guide
WAP-001 11 big Wireless Broadband Router
Package contents:
-Main Unit
-AC ADAPTER
-LAN CABLE
-Quick Setup Guide
-Warranty Statement
AAA—IA
Layout:
‘1‘ M
U. ’ ' f r” f 7,
Ind- Seluct HERELESS/
‘D 1 35mm“
‘ mdicatov
INTERJCV/
STATUS
LAII Connector
"HERE"
LAN comet's!
E E ' ’ " 7 Hg? 7 7
= Inc Law
sg i@£—s
a; “MGM
Indicator:
This product indicates own status by two indicator. Functionality of LED are listed as below:
[WIRELESS/SECURITY]
WIRELESS SECURITY Indicator status
11blg is available OFF Indicator lights Green
11blg transmitfreceive the data OFF Indicator blinks Green
11blg is available ON Indicator lights Red
11blg transmit/receive the data ON Indicator blinks Red
[lNTERNET/STATUS]
Internet connection Diagnostic Indicator status
connection is available
connection is not available
Switch :
- RESET Switch
system is normal
system is normal
system has any issue
Indicator blinksBIue
Indicator off
Indicator blinks Red
When want to load the default setting value , this switch is pushed.
-AOSS (AirStation One-Touch Secure System) Switch
When use the A038 function.this switch is pushed.
- MODE(Router/ Bridge/ Auto) Secect Switch
This switch selects function mode of this product.
Technical Specifications:
Item Contents
Channel IEEE802.11b/g 1-11ch
Total band IEEE802.11b/g 2412-2472MHZ
Operating Temperature l Humidity 0 ~+40°C/ 10 ~ 85%
AC adapter WAP»002
Power Current consumption Max 900mA (Peak 920mA/1ms)
@ input voltage 4.6V
Power consumption 4.2W
Weight Product only 135 9
With Package 13.8kg
dimension [mm] 21 x 104.25 x 100
FCC INFORMATION :
Notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
~Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radiofl' V technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
In accordance with FCC regulation, BUFFALO has limited the WAP-001 to operation
on channels 1-11 by USA specific firmware.
FCC Warning
Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
FCC RF Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for uncontrolled
equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C
to OET65. This equipment should be installed and operated with at least 20cm and more
between the radiator and person‘s body (excluding extremities: hands, wrists, feet and
legs). This transmitter must not be co-Iocated or operating in conjunction with any other
antenna or transmitter.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Creator Tool                    : DocuCentre-II C4300
Modify Date                     : 2008:09:08 13:20:34+09:00
Create Date                     : 2008:09:08 10:06:19+09:00
Metadata Date                   : 2008:09:08 13:20:34+09:00
Producer                        : DocuCentre-II C4300
Format                          : application/pdf
Document ID                     : uuid:88a8e9f5-eea1-41a8-bf04-67cb184aedbb
Instance ID                     : uuid:425abf0d-7e8a-47d1-8fac-2f46a9aed8ec
Page Count                      : 3
Creator                         : DocuCentre-II C4300
EXIF Metadata provided by EXIF.tools
FCC ID Filing: FDI-04610020-0

Navigation menu