BUFFALO 09102006-0 Wireless N USB Adapter/Router User Manual Manual

BUFFALO INC. Wireless N USB Adapter/Router Manual

Manual

www.buffalotech.com v1.0User Manual - AirStation WLI-UC-GNWireless N USB Adapter/Router
2Table of ContentsIntroduction ......................................................................3Installation .......................................................................4Using Windows Zero Cong ...............................................7Using Client Manager 3 .....................................................8Using AOSS ......................................................................9Router Mode ...................................................................12Connecting Your Nintendo DS® ...................................... 14Connecting Your Nintendo Wii® ......................................16Connecting Your Sony PSP® ...........................................19Connecting Your Sony Playstation 3® ............................. 21Specications ..................................................................23FCC/CE Information .......................................................24Contact Information ........................................................38
3Congratulations on your purchase! The AirStation WLI-UC-GN Turbo G wireless USB Adapter connects your notebook computer or desktop PC to a 2.4 GHz 802.11g or b network. It can also serve as an access point for connecting AOSS compatable wireless devices to your existing network. Package Contents• WLI-UC-GN USB Adapter• Utility CD with Manual• Quick Setup Guide• Warranty StatementIntroduction
4Insert the AirNavigator CD into the CD-ROM drive of your computer. Do not insert the USB key into a USB port yet. InstallationThis window will open on your desktop. Select Begin Installation.
5The WLI-UC-GN may be installed as either a wireless client or a wireless router. Choose Client Mode Installation if you want to add a wireless client to your computer, allowing it to connect to existing wireless networks. Turn to the next page for instructions on Client Mode Installation.Choose Access Point Mode Installation if you want to congure the WLI-UC-GN as a simple wireless access point for connecting AOSS-compatable devices such as game consoles. Access Point Mode Installation instructions continue on page 12.Installation
6Client Mode InstallationTo install drivers and use the wireless connection tool built-in to Windows, click Install. Included on the disk is Buffalo’s Client Manager 3 software. To install it, click the checkbox beside it in the Software Option List and then click Install. Client Manager 3 includes the option of automatically connecting to AOSS or WPS devices.Click Next to step through the installation wizards. When the wizard asks you to insert your device, plug the AirStation WLI-UC-GN in to a USB port on your computer. Drivers will install automatically, and if you checked its box, Client Manager 3 will install as well. When the wizard is complete, click Finish.
7To use Windows’ built-in wireless utility, click on its icon in the systray. Zero Cong will open.Using Windows® Zero CongAll available wireless networks will be listed. Click on your network to highlight it and then click Connect.If your network requires a network key or password to connect, enter it twice. Click Connect. When the wireless icon in the systray changes to , you are connected to the wireless network.
8Using Client Manager 3If you installed Buffalo’s Client Manager 3 software, then you will use it to connect instead of Windows Zero Cong. Click on its icon in the systray to open Client Manager.Click on one of the three buttons up top to navigate to the three different sections of Client Manager. The Scan tab shows a list of available wireless networks. Highlight one and click Connect at the bottom to connect to that network. The Status tab shows information about your current wireless connection. The Proles tab lets you create, store, and prioritize common wireless connections. The AOSS button is also located here.
9then AOSS will let you connect the WLI-UC-GN to your wireless network, easily and securely.Your router or access point must support AOSS to use it. If you would rather congure your wireless connection manually, select the Scan tab in Client Manager to scan for available networks.Start Client Manager by double clicking on the black antenna icon in your systray, or by launching it from your Start Menu: Programs >> Buffalo >> AirStation Utility >> ClientManager3.AOSS (AirStation One-Touch Secure System) is a simple system for connecting wireless clients to an access point while enforcing the most secure possible connection encryption type. Users no longer need to worry about choosing the proper security protocols, IP addresses, or SSID. AOSS determines the optimal connection and congures itself in seconds. Your WLI-UC-GN has its AOSS button in the Client Manager software. If your router or access point supports AOSS, Using AOSS
10• From the Status Screen, select the Proles tab.• Initiate AOSS by clicking the blue AOSS button on the Client Manager’s screen. The AOSS wizard will appear.• Now, press the AOSS button on your access point. Hold it down until the AOSS LED on the access point begins to ash (1-3 seconds). Using AOSS
11Once AOSS is complete (about 30 seconds), the connection is archived as a prole for later use. To minimize Client Manager to the system tray, click the ‘X’ in the top right corner.Notes:AOSS will scan for an AOSS partner for about two minutes. If it times out before nding one, just press the AOSS buttons again.Output power is reduced to 25% of normal during AOSS for security reasons. If you’re having trouble making an AOSS connection, temporarily move the devices closer together.AOSS will automatically use the highest level of security available for all currently connected wireless devices. If you have trouble connecting with AOSS, temporarily disable all personal rewalls on your PC, such as ZoneAlarm or Microsoft Personal Firewall. These programs may be re-enabled after AOSS has nished. Also, make sure that any other wireless client manager software (including Windows XP’s Zero Conguration Service) is disabled before using Client Manager.Using AOSS
12Besides its wireless client capability, the WLI-UC-GN can function as a wireless access point. If your computer already has a connection to the internet, and you want to connect AOSS-compatable devices wirelessly, then choose Access Point Mode during installation. Note: If you have rewall or antivirus software running on the computer, temporarily disable it before continuing.Click Install to continue. Continue clicking Next to step through the installation wizard. When the program asks for your device, plug the WLI-UC-GN into a USB port on the computer and click Next, OK, and Finish. Access Point Mode Installation
13AOSSUsing Your AirStation as an Access PointMany kinds of AOSS devices can be connected to the AirStation WLI-UC-GN in access point mode. Right click on the icon to open the window shown at left. Click or push the AOSS button for the device you want to connect to start AOSS. Then, click on the AOSS button in this window. AOSS will set up your connection automatically.In the following examples, we’ll show how to connect several common gaming consoles to the AirStation wirelessly.
14The DS® uses seperate wireless connections for each game. You will need to do these steps for each game that you play wirelessly.Turn on your DS®. Click on Wi-Fi Settings. The location of this may vary depending on what game you're in.Click on Nintendo Wi-Fi Connection Settings.Click on any of the 3 available connections.Connecting Your Nintendo DS®
15Click on AOSS.You'll see this screen. Now, click the AOSS button on your desktop (see page 13). Your DS® is now connected to the network. Click OK to run a connection test. Connecting Your Nintendo DS®
16Turn on your Wii®. Click on Wii Options, in the bottom left corner of the main menu. Click on Wii Settings.Click on the right arrow for more options.Connecting Your Nintendo Wii®
17Click on Internet. Click on Connection Settings.Click on any of the three available connections. If the coonection you're using has settings already saved, clear them.Connecting Your Nintendo Wii®
18Connecting Your Nintendo Wii®Click on AOSS.When you see this screen, click the AOSS button on your PC's desktop (page 13 for more info). Your Wii® is now connected to the network. Click OK to run a connection test.
19Turn on your PSP®. PSP rmware version 2.0 or later is required to use AOSS. Update your PSP rmware if necessary.Select Network Settings. Connecting Your Sony PSP®
20Choose Infrastructure Mode. Choose New Connection. Choose Automatic. Select AOSS. Click the AOSS button on your PC's desktop (see page 13 for more info). Connecting Your Sony PSP®In about a minute, the devices will form a secure connection.
21Turn on your Playstation 3® without a game inserted and navigate to Network Settings. Open Internet Connection Settings.Select Yes to continue.Connecting Your Sony Playstation 3®
22Choose Wireless. Choose Automatic. Press the "X" button on your controller to initiate AOSS. Then, click the AOSS button on your PC's desktop (page 13 for more info on this). Connecting Your Sony Playstation 3®In about a minute, the devices will form a secure connection.
23SpecicationsStandards Compliance: IEEE802.11g/IEEE802.11b/IEEE802.11nDraft2.0Access Modes: Infrastructure (Client Mode/AP Mode) Ad-hoc (Client Mode)Communication Protocol: OFDM, DSSS, CCKFrequency Range: 2412 - 2464MHz (Channels 1 - 11)Security: WPA-PSK (TKIP,AES), WPA2-PSK (TKIP, AES)*, 128/64-bit WEP *Software Access Point mode does not support WPA2-PSK. Interface: USB 2.0Dimensions: 0.67x 1.34” x 0.33” (17 x 34 x 8.5 mm)Weight: ~0.19 ounces (4 grams)Operating Environment: 32° - 104° F; 20-80% non-condensingOS Support: Windows® XP, Windows® Vista
24FCC/CE & Other Standard InformationFederal Communication Commission Interference StatementThis equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.FCC Caution: Any changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
25IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specic operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. The USB dongle transmitter is approved for use in typical laptop computers. To comply with FCC RF exposure requirements, it should not be used in other devices or certain laptop and tablet computer configurations where the USB connectors on the host computer are unable to provide or ensure the necessary operating configurations intended for the device and its users or bystanders to satisfy RF exposure compliance requirements.
26
27Taiwan:SAR compliance has been established in typical laptop computer(s) with CardBus slot, and product could be used in typical laptop computer with CardBus slot. Other application like handheld PC or similar device has not been verified, may not comply with related RF exposure rules, and such use shall be prohibited. Europe - EU Declaration of Conformity:This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC.• EN60950-1:2006Safety of Information Technology Equipment• EN 62311:2008Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields(0 Hz-300 GHz).• EN 300 328 V1.7.1 (2006-10)Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive.
28• EN 301 489-1 V1.8.1: (2008-04)Electromagnetic compatibility and Radio spectrum Matters (ERM) — ElectroMagnetic Compatibility (EMC) standard for radio equipment and services — Part 1: Common technical requirements.• EN 301 489-17 V1.3.2: (2008-04)Electromagnetic compatibility and Radio spectrum Matters (ERM) — ElectroMagnetic Compatibility (EMC) standard for radio equipment — Part 17: Specific conditionsfor 2,4 GHz wideband transmission systems, 5 GHz high performance RLAN equipment and 5,8 GHz Broadband Data Transmitting Systems.This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies.In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain an authorization to use the device for setting up outdoor radio links and/or for supplying public access to telecommunications and/or network services.This device may not be used for setting up outdoor radio links in France and in some areas the RF ourput power may be limited to 10 mW EIRP in the frequency range of 2454 - 2483.5 MHz. For detailed information the end-user should contact the national spectrum authority in France.
29
30
31
32FCC ID:FDI-09102006-0CCAxxxLPxxxxT1 xxxxx / POSTEL / xxxxxxxxComplies withIDA StandardsETA-xxx/xxxxNo.ESD-xxxxxxxxCMII:xxxxxxxxxx DA10.412BUF-WLIUCGN01Tested to complyWith FCC Standards
33Logos and Trademarks© Buffalo Technology (USA), Inc. Buffalo Technology, Buffalo Technology logo and AOSS logo are registered trademarks of Buffalo Technology (USA), Inc. The names and logos of other companies mentioned herein belong to their respective owners. “Nintendo” is a registered trademark of Nintendo of America Inc. Nintendo owns extensive intellectual property rights in all of its products, including video game systems, game titles, characters, game software, graphics, artwork, and screen shots. Nintendo also retains rights in content on Nintendo’s web sites, including articles, artwork, screen shots and other les. Trademarks and copy-rights for third-party games and characters are owned by the companies that market or license those products. “SONY” is a registered trademark or Sony Corporation, Inc. Any other product names, service names or logos of SONY used are trademarks or registered trademarks of Sony Corporation or any of its afliates. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
34Contact Information (North America)ADDRESS Buffalo Technology (USA), Inc.11100 Metric Blvd, Suite 750Austin, TX 78758GENERAL INQUIRIES Email: sales@buffalotech.comTECHNICAL SUPPORT North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada). Toll-free: (866) 752-6210
35Contact Information (Europe)ADDRESS Buffalo Technology UK Ltd.2 Bracknell Beeches, Old Bracknell LaneBracknell, Berkshire, RG12 7BWUnited KingdomGENERAL INQUIRIES Email: sales@buffalo-technology.comTECHNICAL SUPPORT Buffalo Technology provides technical support in English, German, French, Italian, and Spanish. For opening hours and relevant telephone numbers, please go to www.buffalo-technology.com/contact
36NCC Annoucement (Taiwan)

Navigation menu