BUFFALO 09102021-0 802.11abg Cardbus Adapter User Manual
BUFFALO INC. 802.11abg Cardbus Adapter
BUFFALO >
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 669352 |
| Application ID | lz8wg0ZkRoFNLbqM2seb2A== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 269.29kB (3366123 bits) |
| Date Submitted | 2006-06-15 00:00:00 |
| Date Available | 2006-07-19 00:00:00 |
| Creation Date | 2006-06-14 10:10:44 |
| Producing Software | Adobe PDF Library 7.0 |
| Document Lastmod | 2006-06-15 17:09:55 |
| Document Title | User Manual |
| Document Creator | Adobe InDesign CS2 (4.0.2) |
User Manual AirStation Dual A&G Draft-N Wireless Notebook Adapter WLI-CB-AG108HP v.7 Welcome! Thanks for buying the WLI-CB-AG108HP Wireless CardBus Client. This wireless notebook adaptor lets you connect your notebook PC to wireless networks that follow the wireless a, wireless b, or wireless g standards. Getting Started • Insert the AirNavigator CD into the CD-ROM drive of your computer. The AirNavigator Setup Wizard should launch automatically. • To launch the AirNavigator Setup Wizard manually, click Start, then Run. Type “D:\ Setup.exe”, where D is the drive letter assigned to your CDrom. • Click OK to launch the wizard. Installing Wireless Drivers • Select Install Wireless Drivers. Installing Wireless Drivers • Click Next to install a driver for the CardBus. • Select Agree and click Next. • A window will appear prompting the insertion of the Wireless CardBus Adapter. Firmly insert the AirStation Card into a CardBus slot on your notebook. Installing Wireless Drivers • When the ‘Found New Hardware Wizard’ launches, click Next to run the wizard. • If the ‘Digital Signature Not Found’ page opens, click Yes. • When the Wireless CardBus Adapter is successfully installed, click Finish. Restart your computer if prompted. Connecting Wireless Clients to your Network Buffalo supports three different methods for connecting your wireless client device to your network. If your AP supports it, use the simple, utterly secure AOSS to connect. Install the Client Manager from your AirNavigator CD (page 7) and turn to page 10. You may also use the Client Manager software from your AirNavigator CD to configure your network manually. See page 15 for more on Client Manager. If you’re running Windows XP on your PC, you may use its built-in Zero Configuration tool to connect to your router/AP. See page 20 for more on Zero Configuration. Client Manager Client Manager can be used to survey and connect to available access points, configure WPA/WEP encryption, and create connection profiles. Note: When Client Manager is installed, Windows XP Wireless Zero Configuration is automatically disabled. Installing Client Manager Insert the AirNavigator CD into the CDROM drive of you computer. If the Air Navigator Setup Wizard does not launch automatically, launch it manually by clicking Start and then Run. Enter D:\ Setup.exe in the dialog box that appears. Click OK. Select Install Wireless Client Manager. Client Manager • Once the Client Manager Installer launches, click Next. • Press Agree to accept the license agreement and continue installation. Client Manager • Click OK when Client Manager installation is complete. • Press Exit Setup to exit AirNavigator. • Client Manager is now installed and running. Right-click on its icon (the black antenna) to use it. 10 Using AOSS AOSS (AirStation One-Touch Secure System) is a simple, one-touch setup for connecting wireless clients to an access point while enforcing the most secure possible connection encryption type. Users no longer need to worry about choosing the proper security protocols, IP addresses, or SSID. AOSS determines the optimal connection and configures itself in seconds. If your router doesn’t support AOSS, turn to page 6 to configure your connection manually with Client Manager or Wireless Zero Config. The AOSS button for this wireless client is in its Client Manager software. Start Client Manager by right clicking on the black antenna icon in your System Tray, or by launching the Client Manager from your Start Menu: Programs >> Buffalo >>AirStation Utility >> Client Manager. 11 Using AOSS • From the Status Screen, select the Profiles tab. • Initiate AOSS by clicking the blue AOSS button on the Client Manager’s screen. The AOSS wizard will appear. • Now, press the AOSS button on the Access Point. Hold it down until the AOSS LED begins to flash. 12 Using AOSS Once AOSS is complete (about 30 seconds), the connection is archived as a profile for later use. To minimize Client Manager to the system tray, click the ‘X’ in the top right corner. Notes: AOSS will scan for an AOSS partner for about two minutes. If it times out before finding one, just press the AOSS buttons again. Output power is reduced to 25% of normal during AOSS for security reasons. If you’re having trouble making an AOSS connection, temporarily move the devices closer together. AOSS will automatically use the highest level of security available for all currently connected wireless devices. If you have trouble connecting with AOSS, temorarily disable all personal firewalls on your PC, such as ZoneAlarm or Microsoft Personal Firewall. These programs may be re-enabled after AOSS has finished. 13 Client Manager Configuration You may use Client Manager to configure your wireless network. Client Manager consists of the Status page, the Survey page, and the Profiles page. You can access each page by clicking the corresponding button on Client Manager. In addition to these pages, several dialog boxes are also available. You can access the Edit Profile dialog box, New Profile dialog box, IP Configuration dialog box, or WEP Configuration dialog box using the Client Manager pages. You may also initiate AOSS. Status Page Click Status to open this page. By default, this page is displayed when you start Client Manager. Details of connection status are displayed. This page only displays connection information; no changes to settings are made here. This page includes the following components: • Adapter Name – Displays the part number of the wireless adaptor that is being used. 14 Client Manager Configuration • Network Type - Displays whether network is in Ad-Hoc or Infrastructure mode. • Rate – The speed of communication between wireless devices. If the Client Manager is • • • • • not connected to a remote wireless device (access point or another client), no rate will be displayed. Channel – The channel that the two wireless clients are using for communication. If the Client Manager is not connected to a remote wireless device, no channel will be displayed. Channels 1-11 may be used. Security – The type of encryption in use. If the Client Manager is not connected to a remote wireless device, then ‘No Encryption’ will be displayed. IP Address – The IP address of the machine the Client Manager is installed on. If the Client Manager is not connected to a network with DHCP, then no IP address will be displayed. MAC Address – The MAC address of the wireless client device inside the computer Client Manager is installed on. If no wireless device is present in the computer, then no MAC Address will be displayed. Signal Strength – Displays the signal strength of the peak signal level the wireless adapter receives from the wireless device to which it is connected. Next to the signal level is the wireless hardware being used for this measurement. 15 Client Manager Configuration Click the Scan tab to open this page. Here, you can survey the area, display available access points, and connect to available access points. This page includes the following components: • Wireless SSID – The SSID is the “name” of a wireless network. Each wireless device on a network must use identical SSIDs to successfully communicate. • Wireless Mode – Displays available modes for each available remote wireless device. • Strength – Displays the relative signal strength of the wireless networks. • Encryption – Displays whether the wireless network is using any sort of encryption. Click Connect to connect to a highlighted SSID, or Refresh to update the list of available wireless devices. 16 Client Manager Configuration This dialog will open for you to enter any necessary encryption information. The correct encryption type should already be selected automatically in the Encryption Method drop down list. Only change this setting if necessary. The Encryption Key is where the actual key for the wireless network should be entered. Some wireless networks allow you to enter multiple keys; four separate fields are available for this. If your network only uses one encryption key, then please use the first field (#1) to enter your key. on using this wireless network again. The Register Profile option will store this wireless network in your profiles. You will then automatically connect to this network when inside its range. This is recommended if you plan Press the Connect button once you have completed entering encryption information. 17 Client Manager Configuration Profiles Page Click the Profiles tab to open this page. Use this page to access your profiles. Profiles allow you to save the information associated with a specific wireless network so you can quickly and easily connect to that network when you are in that location. The Profiles page allows you to add, delete, and edit your profiles, as well as import and export data. • Connect – Click the Connect button to connect to the selected profile and return to the Status page. • Edit – Click the Edit button to edit the selected profile’s settings. The Edit button also allows you to delete profiles that are no longer used or required. • Add – Click the Add button to add a profile manually. You will need important information such as SSID, encryption settings, and network type. 18 Client Manager Configuration New Profile Dialog Box • Select Profile – Select whether the profile is for a wireless or wired connection. • Profile Name – Enter the name you want to associate with the new profile. • Network Type – Select the network mode you want to associate with the new profile. Select Infrastructure if your network consists of both wired and wireless devices that communicate through a central device, such as an access point. Select Ad-hoc if your network consists of only wireless devices that communicate with each other directly. • Network Name SSID – Enter the SSID of your network. The SSID is the name of your wireless network. All wireless devices on a network must use identical SSIDs to successfully associate with other devices on the network. MYSSID is an example of a valid SSID. • Channel – The channel setting is only used for Ad-hoc connections. When using an Ad-hoc connection, select a channel and make sure the other Ad-hoc devices are configured to use the same channel. Otherwise, use Auto-Channel. • Encryption Method – Displays the types of encryption available. Once encryption is selected, you will be required to enter an Encryption Key. For the Transmission Key Number, 1 is recommended. • OK – Click OK to save your specifications and return to the Profiles page. 19 Client Manager Configuration Advanced Profile Options • Network Tab – Displays the network information tab. A static IP can be specified for this wireless profile here. It is not recommended to change any of these settings unless specified by an administrator. • Browser Tab – Displays settings to change your browser preferences for this wireless profile. A specific home page can be specified when connected to this wireless profile as can specific proxy server addresses. • Printers Tab – Displays the printers tab. A specific default printer can be associated to this profile. Thus, when connected to this profile, a specific printer will be used as the default printer. • OK – Click the OK button to save your specifications and return to the Profiles page. • AOSS Icon – To automatically add the USB wireless client to your network, just click this icon and then hold down the AOSS button on your wireless router for a few seconds. Check your package for an AOSS Manual, which will give more information on using AOSS. 20 Zero Configuration Service Windows XP includes the Zero Configuration Service, a built in serrvice to configure your wireless clients from within Windows. Turn to page 7 if you would rather use Buffalo’s Client Manager to configure your wireless client. • If the Wireless Zero Configuration Service is activated, Windows will scan for available wireless access points once the Wireless CardBus Adapter is properly installed. If Windows detects one or more access points, a networking icon appears within the system tray. “One or more wireless networks are available” will appear as a caption accompanying the icon. • To start Wireless Zero Configuration manually, click Start >> Control Panel >> Administrative Tools >> Services. Select Automatic in the Startup Type field of Wireless Zero Configuration Service. • Right click the networking icon in the taskbar and select View Available Wireless Networks. Select an SSID and click Connect. You may need to check the box indicating you are connecting to an unsecured network. See page 21 if you need to enter an SSID network name or WEP/WPA encryption key. 21 Zero Configuration Service • Click the Advanced tab to enter an SSID network name or WEP/WPA encryption key if necessary. To add an SSID network name that is not listed, click Add. 22 Zero Configuration Service • To configure a WEP/WPA encryption key, select the wireless network and click Configure. • From the pull down menu, select the Network Authentication and Data Encryption types for the wireless network. Enter and confirm the Network Key and Key Index. Click OK when finished. 23 Wireless Zero Configuration Wireless Zero Configuration Service (Windows XP) Windows XP offers the Wireless Zero Configuration Service to support 802.11b and 802.11g wireless networking. This service automatically polls the area for available wireless access points. If an available wireless access point is found, Windows attempts to connect to the access point. If no available wireless access points are found, you must manually add the access point information to connect (for example when the SSID is not broadcasted). Note: The Wireless Zero Configuration Service and Client Manager do not function properly together. If you want to use Client Manager, you must disable the Wireless Zero Configuration Service. Enabling the Wireless Zero Configuration Service Click Start >> Control Panel >> Administrative Tools >> Services to open the Services configuration window. Select Automatic in the Startup Type field of Wireless Zero Configuration Service to enable the Wireless Zero Configuration Service and click apply. Note: The default Startup Type value of Wireless Zero Configuration Service is Automatic. Disabling the Wireless Zero Configuration Service Click Start >> Control Panel >> Administrative Tools >> Services to open the Services configuration window. Select Disabled in the Startup Type field of Wireless Zero Configuration Service to disable the Wireless Zero Configuration Service. 24 Antenna Information The WLI-CB-AG108HP includes builtin antennas that allow it to connect to 802.11a, 802.11b, or 802.11g networks. External antennas cannot be attached to the WLI-CB-AG108HP. 25 Specifications Wireless LAN Interface Standards Compliance IEEE 802.11a IEEE 802.11g IEEE 802.11b Communication Protocol (OFDM) Direct Sequence Spread Spectrum (DSSS) Orthogonal Frequency Division Multiplexing Frequency Range 2.412 - 2.462 Mhz Transmission Rate 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps (Auto) 802.11g: 6, 9, 12, 18, 24, 36, 48, 54 Mbps (Auto) 802.11b: 1, 2, 5.5, 11 Mbps (Auto) Access Mode Infrastructure Mode Security 128/64 Bit WEP, WPA-PSK (TKIP & AES) Other Interface CardBus Environmental Operation 0 - 130º Fahrenheit 0 - 55º Celsius Relative Humidity 20 - 80 % (non-condensing) 26 Troubleshooting / FAQ What should I do if I already have a version of Client Manager on my PC? Update your Client Manager to the version on the CD. If you do not update your Client Manager, there could be a loss of functionally, as some older versions of Client Manager will not work properly with the G300N Wireless Notebook Adapter. Before updating Client Manager, uninstall any previous versions of Client Manager. To update your Client Manager, load the Air Navigator CD and select Install Client Manager. Profiles can first be exported from the Profiles tab of Client Manager and then imported back into Client Manager after installation. Why won't Client Manager function properly? The Wireless Zero Configuration Service in Windows XP conflicts with Client Manager. If you use Windows XP, make sure that the Wireless Zero Configuration Service is disabled. Click Start >> Control Panel >> Administrative Tools >> Services. Select Disabled in the Startup Type field of Wireless Zero Configuration Service to enable the Wireless Zero Configuration Service. The default value of Wireless Zero Configuration Service is Automatic. I have more than one Air Navigator CD. Do I need more than one CD? No. The same Air Navagator CD works with all Buffalo Technology access points and wireless adapters. Please use the newest CD you have, with the highest revision number on it. 27 Glossary 10BaseT or 100BaseTx: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps. Client: A PC or workstation on a network. 802.1x: The standard for wireless LAN authentication used between an AP and a client. 802.1x with EAP will initiate key handling. DCE (Data Communications Equipment): Hardware used for communication with a Data Terminal Equipment (DTE) device. Cross-Over Wiring: A UTP cable that has its transmit and receive pair crossed to allow communications between two devices. Default Gateway: The IP Address of either the nearest router or server for the LAN. Ad-Hoc Network: The wireless network based on a peer-to-peer communications session. Also referred to as Adhoc. Default Parameter: Parameter set by the manufacturer. Bandwidth: The transmission capacity of a computer or a communication channel, stated in Megabits per second (Mbps). BSS (Basic Service Set): An 802.11 networking framework that includes an Access Point. Bus Mastering: A system in which the specified Input/Output device (e.g. NIC Card) can perform tasks without the intervention of the CPU. 28 Destination Address: The address portion of a packet that identifies the intended recipient station. DHCP (Dynamic Host Configuration Protocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device connected to it, and retrieves the address when the device becomes dormant for a period of time. Glossary DNS (Domain Name System): System used to map readable machine names into IP addresses Bandwidth: The transmission capacity of a computer or a communication channel, stated in Megabits per second (Mbps). Driver: Software that interfaces a computer with a specific hardware device. BSS (Basic Service Set): An 802.11 networking framework that includes an Access Point. DSSS (Direct Sequence Spread Spectrum): Method of spreading a wireless signal into wide frequency bandwidth. Bus Mastering: A system in which the specified Input/Output device (e.g. NIC Card) can perform tasks without the intervention of the CPU. DTE (Data Terminal Equipment): Device that con10BaseT or 100BaseTx: 802.3 based Ethernet network that uses UTP (Unshielded twisted pair) cable and a star topology. 10 is 10 Mbps and 100 is 100 Mbps. Client: A PC or workstation on a network. Cross-Over Wiring: A UTP cable that has its transmit and receive pair crossed to allow communications between two devices. 802.1x: The standard for wireless LAN authentication used between an AP and a client. 802.1x with EAP will initiate key handling. DCE (Data Communications Equipment): Hardware used for communication with a Data Terminal Equipment (DTE) device. Ad-Hoc Network: The wireless network based on a peer-to-peer communications session. Also referred to as AdHoc. Default Gateway: The IP Address of either the nearest router or server for the LAN. 29 Glossary Default Parameter: Parameter set by the manufacturer. DTE (Data Terminal Equipment): Device that controls data flowing to and from a computer. Destination Address: The address portion of a packet that identifies the intended recipient station. Dynamic IP Address: An IP address that is automatically assigned to a client station in a TCP/IP network, typically by a DHCP server. DHCP (Dynamic Host Configuration Protocol): Based on BOOTP, it uses a pool of IP addresses, which it assigns to each device connected to it, and retrieves the address when the device becomes dormant for a period of time. ESS (Extended Service Set): A set of two or more BSSs that form a single sub-network. ESS-ID is user identification used in the ESS LAN configuration. DNS (Domain Name System): System used to map readable machine names into IP addresses Ethernet: The most widely used architecture for Local Area Networks (LANs). It is a shared-media network architecture. The IEEE 802.3 standard details its functionality. Driver: Software that interfaces a computer with a specific hardware device. Ethernet cable: A wire similar to telephone cable that carries signals between Ethernet devices. DSSS (Direct Sequence Spread Spectrum): Method of spreading a wireless signal into wide frequency bandwidth. 30 Glossary File and Print Sharing: A Microsoft application that allows computers on a network to share files and printers. IEEE (Institute of Electrical and Electronics Engineers): The professional organization which promotes development of electronics technology. Firmware: Programming inserted into programmable read-only memory, thus becoming a permanent part of a computing device. Frame: A fixed block of data, transmitted as a single entity. Also referred to as packet. Full-Duplex: To transmit on the same channel in both directions simultaneously. Gbps (Giga Bits per second): One billion bits per second. IP (Internet Protocol) Address: A unique 32-binary-digit number that identifies each sender or receiver of information sent in packets. Infrastructure: A wireless network or other small network in which the wireless network devices are made a part of the network through the Access Point. ISP (Internet Service Provider): A company that provides access to the Internet and other related services. Half-duplex: To transmit on the same channel in both directions, one direction at a time. IV (Initialization Vector): The header section of a message packet. Hub: A device which allows connection of computers and other devices to form a LAN. LAN (Local Area Network): A group of computers and peripheral devices connected to share resources. 31 Glossary LED (Light Emitting Diode): The lights on a hardware device representing the activity through the ports. NAT (Network Address Translation): An internet standard that enables a LAN to use one set of IP addresses for internal traffic and a second set for external traffic. MAC (Medium Access Control) Address: A unique number that distinguishes network cards. NIC (Network Interface Card): An expansion card connected to a computer so the computer can be connected to a network. Mbps (Mega Bits Per Second): A measurement of millions of bits per second. Packet: A block of data that is transferred as a single unit, also called a frame or a block. MDI/X (Media Dependent Interface/Crossover): Port on a network hub or switch that crosses the incoming transmit lines with the outgoing receive lines. Packet Filtering: Discarding unwanted network traffic based on its originating address or its type. MHz (MegaHertz): One million cycles per second. MIB II: A database containing performance information and statistics on each device in a network. MIPS (Million Instructions Per Second): A measurement of processing speed. 32 PCI (Peripheral Component Interconnect): A bus that is connected directly to the CPU. PCMCIA (Personal Computer Memory Card International Association) Card: Removable module that adds features to a portable computer. Glossary Ping (Packet Internet Groper): An Internet utility used to determine whether a particular IP address is online. Repeater Hub: A device that collects, strengthens and transmits information to all connected devices, allowing the network to be extended to accommodate additional workstations. Plug and Play: Hardware that, once installed (“plugged in”), can immediately be used (“played”), as opposed to hardware that requires manual configuration. RC4: The encryption algorithm that is used in WEP. PoE (Power over Ethernet): A mechanism to send DC power to a device using a CAT5 Ethernet cable. RJ-45 connector: An 8-pin connector used between a twisted pair cable and a data transmission device. PPPoE (Point-to-Point Protocol over Ethernet): A specification for connecting users on an Ethernet line to the Internet through a common broadband medium. ROM (Read Only Memory): Permanent memory. Protocol: A standard way of exchanging information between computers. Roaming: The ability to use a wireless device while moving from one access point to another without losing the connection. Router: Device that can connect individual LANs and remote sites to a server. RADIUS (Remote Authentication Dial In User Service): A server that issues authentication key to clients. Script: A macro or batch file containing instructions and used by a computer to perform a task. RAM (Random Access Memory): Nonpermanent memory. 33 Glossary Server: Any computer that makes files or peripheral devices available to users of the network and has a resident Network OS. TCP/IP (Transmission Control Protocol/ Internet Protocol: Protocol used by computers when communicating across the Internet or Intranet. SMTP (Simple Mail Transfer Protocol): The protocol used to define and deliver electronic mail (E-mail) from one location to another. TFTP (Trivial File Transfer Protocol): Simple form of FTP (File Transfer Protocol), which Uses UDP (User Datagram Protocol), rather than TCP/IP for data transport and provides no security features. SNMP (Simple Network Management Protocol: An application layer protocol that outlines the formal structure for communication among network devices. TKIP (Temporal Key Integrity Protocol): An encryption method replacing WEP. TKIP uses random IV and frequent key exchanges. Static IP Address: A permanent IP address is assigned to a node in a TCP/IP network. Also known as global IP. Topology: The shape of a LAN (Local Area Network) or other communications system. STP (Shielded Twisted Pair): Twisted Pair cable wrapped in a metal sheath to provide extra protection from external interfering signals. Twisted Pair: Cable that comprises 2 or more pair of insulated wires twisted together. Subnet Mask: An eight-byte address divided into 4 parts separated by periods. 34 Glossary UDP (User Datagram Protocol): A communication method (protocol) that offers a limited amount of service when messages are exchanged between computers in a network. UDP is used as an alternative to TCP/IP. Wire Speed: The maximum speed at which a given packet can be transferred using Ethernet and Fast Ethernet standard specifications. Uplink: Link to the next level up in a communication hierarchy. VPN (Virtual Private Network): A security method to connect remote LAN users to a corporate LAN system. WLAN (Wireless LAN): A LAN topology using wireless devices. UTP (Unshielded Twisted Pair) cable: Two or more unshielded wires twisted together to form a cable. WAN (Wide Area Network): A networking system covering a wide geographical area. WEP (Wired Equivalent Privacy): An encryption method based on 64 or 128-bit algorithm. Web Browser: A software program that allows viewing of web pages. Wi-Fi (Wireless Fidelity): An organization that tests and assures interoperability among WLAN devices. 35 Federal Communication Commission Declaration of Conformity ( DoC ) Statement Model No: WLI-CB-AG108HP AirStation Dual A&G Wireless Network Adapter Buffalo Inc. 15, Shibata Hondori 4-chrome Minami-ku, Nagoya 457-8520 Japan 01181-52-241-7980 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modifications not expressly approved by the party responsible for product compliance could void the user’s authority to operate the equipment. Within the 5.15-to-5.25-GHz band, UNII devices are restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite Systems (MSS) operations Caution: Exposure to radio frequency radiation ( below is for mobile device ) To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Caution Exposure to radio frequency radiation (below is for portable device) To comply with FCC RF exposure compliance requirements, this device must not be colocated or operating in conjunction with any other antenna or transmitter. b. Industry Canada Portion Canada Regulatory Compliance Statement This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numériqué de la classe B est conformé à la norme NMB-003 du Canada. For Customers in Canada This device complies with RSS 210 of Industry Canada (IC). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device. L’ utilisation de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif. Caution: Within the 5.15-to-5.25-GHz band, UNII devices are restricted to indoor operations to reduce any potential for harmful interference to co-channel Mobile Satellite Systems (MSS) operations Exposure to radio frequency radiation (below statement applied to mobile or portable device) The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canada’s website at www.hc-sc.gc.ca/rpb. c. EU Portion European Community Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC The following standards were applied: • Radio: EN 300-328 v1.6.1 (2.4-GHz operation) • EN 301-893 v1.2.3 (5-GHz operation) • EMC: EN 301.489-1 v1.4.1, EN 301.489-17 v1.2.1 • Safety: IEC 60950 ( 1999 3rd Edition with Amend. 1,2,3,4 ) & EN 60950 ( 2000 ) The following CE mark is affixed to the device: 43 Note: This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies and/or may require a license for operation. For more details, contact your customer service representative. To comply with RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. This device must not be co-located or operating in conjunction with any other antenna or transmitter. Member States shall ensure that the manufacturer or the person responsible for placing the apparatus on the market provides information for the user on the intended use of the apparatus, together with the declaration of conformity to the essential requirements. Where it concerns radio equipment, such information shall be sufficient to identify on the packaging and the instructions for use of the apparatus the Member States or the geographical area within a Member State where the equipment is intended to be used and shall alert the user by the marking on the apparatus referred to in Annex VII, paragraph 5, to potential restrictions or requirements for authorization of use of the radio equipment in certain Member States. 44 Declaration of Conformity with Regard to the R&TTE Directive 1999/5/EC Česky [Czech] Buffalo Technology Inc. tímto prohlašuje, že tento AirStation WHR-HP-AG108 je ve shodě se základními požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES. Dansk [Danish] Undertegnede Buffalo Technology Inc. erklærer herved, at følgende udstyr AirStation WHR-HP-AG108 overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF. Deutsch [German] Hiermit erklärt Buffalo Technology Inc. dass sich das Gerät AirStation WHR-HP-AG108 in Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet. Eesti [Estonian] Käesolevaga kinnitab Buffalo Technology Inc. seadme AirStation WHR-HP-AG108 vastavust direktiivi 1999/5/ EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele. English Hereby, Buffalo Technology Inc. declares that this AirStation WHR-HP-AG108 is in compliance 45 with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente Buffalo Technology Inc. declara que el AirStation WHR-HP-AG108 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Buffalo Technology Inc. ΔΗΛΩΝΕΙ ΟΤΙ AirStation WHR-HP-AG108 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente Buffalo Technology Inc. déclare que l’appareil AirStation WHR-HP-AG108 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente Buffalo Technology Inc. dichiara che questo AirStation WHR-HP-AG108 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. 46 with the essential requirements and other relevant provisions of Directive 1999/5/EC. Español [Spanish] Por medio de la presente Buffalo Technology Inc. declara que el AirStation WHR-HP-AG108 cumple con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE. Ελληνική [Greek] ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Buffalo Technology Inc. ΔΗΛΩΝΕΙ ΟΤΙ AirStation WHR-HP-AG108 ΣΥΜΜΟΡΦΩΝΕΤΑΙ ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ. Français [French] Par la présente Buffalo Technology Inc. déclare que l’appareil AirStation WHR-HP-AG108 est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE. Italiano [Italian] Con la presente Buffalo Technology Inc. dichiara che questo AirStation WHR-HP-AG108 è conforme ai requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE. 47 Latviski [Latvian] Ar šo Buffalo Technology Inc. deklarē, ka AirStation WHR-HP-AG108 atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem noteikumiem. Lietuvių [Lithuanian] Šiuo Buffalo Technology Inc. deklaruoja, kad šis AirStation WHR-HP-AG108 atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas. Nederlands [Dutch] Hierbij verklaart Buffalo Technology Inc. dat het toestel AirStation WHR-HP-AG108 in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG. Malti [Maltese] Hawnhekk, Buffalo Technology Inc. , jiddikjara li dan AirStation WHR-HP-AG108 jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC. Magyar [Hungarian] Alulírott, Buffalo Technology Inc. nyilatkozom, hogy a AirStation WHR-HP-AG108 megfelel a vonatkozó alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak. Polski [Polish] Niniejszym, Buffalo Technology Inc. , deklaruję, że AirStation WHR-HP-AG108 spełnia wymagania zasadnicze oraz stosowne postanowienia zawarte Dyrektywie 1999/5/EC. Português [Portuguese] Buffalo Technology Inc. declara que este AirStation WHR-HP-AG108 está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE. Slovensko [Slovenian] Buffalo Technology Inc. izjavlja, da je ta AirStation WHR-HP-AG108 v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive 1999/5/ES. Slovensky [Slovak] Buffalo Technology Inc. týmto vyhlasuje, že AirStation WHR-HP-AG108 spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice 1999/5/ES. Suomi [Finnish] Buffalo Technology Inc. vakuuttaa täten että AirStation WHR-HP-AG108 tyyppinen laite on direktiivin 49 1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar Buffalo Technology Inc. att denna AirStation WHR-HP-AG108 står I överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv 1999/5/EG. 5 FCC / CE / R&TTE Safety This equipment is designed with the utmost care for the safety of those who install and use it. However, special attention must be paid to the dangers of electric shock and static electricity when working with electrical equipment. All guidelines of this manual and of the computer manufacturer must therefore be allowed at all times to ensure the safe use of the equipment. Intended use This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in USA, Canada, all EU and EFTA member states. EU Countries intended for use This device is intended for indoor home and office use in the following countries: Austria, Belgium, Germany, Denmark, Spain, Greece, France, Finland, Italy, Ireland, Luxembourg, The Netherlands, Portugal, Sweden, United Kingdom, Cyprus, Czech Republic, Estonia, Hungry, Latvia, Lithuania, Malta, Poland, Slovak Republic and Slovenia. The device is also authorised for use in all EFTA member states Iceland, Liechtenstein, Norway and Switzerland. 48 FCC / CE / R&TTE EU countries not intended for use None Potential restrictive use This device is a 2.4 GHz wireless LAN transceiver, intended for indoor home and office use in all EU and EFTA member states, except in France, Belgium and Italy where restrictive use applies. In Italy the end-user should apply for a license at the national spectrum authorities in order to obtain an authorization to use the device for setting up outdoor radio links. In Belgium there is a restriction in outdoor use. The frequency range in which outdoor operation in Belgium is permitted is 2460 – 2483.5 MHz. In France only channels 10,11,12 and 13 are available. This device may not be used for setting up outdoor radio links in France. For more information see http://www.anfr.fr/ and/or http://www.art-telecom.fr 39 Warranty Information Buffalo products come with a 2-year limited warranty from the date of purchase. Buffalo Technology warrants products in good operating condition for the warranty period. This warranty does not include non-Buffalo Technology installed components. If the Buffalo product malfunctions during the warranty period, Buffalo Technology will, at its discretion, repair or replace the product at no charge, provided the product has not been subjected to misuse, abuse or non-Buffalo Technology authorized alterations, modifications, or repairs. When returning a product, include your original proof of purchase. Return requests cannot be processed without proof of purchase. Shipment of returned product to Buffalo Technology is the responsibility of the purchaser. All expressed and implied warranties for the Buffalo product line including, but not limited to, the warranties of merchantability and fitness for a particular purpose, are limited in duration to the above period. Under no circumstances shall Buffalo Technology be liable in any way to the user for damages, including any lost profits, lost savings or other incidental or consequential damages arising out of the use of, or inability to use, the Buffalo products. Buffalo Technology reserves the right to revise or update its products, software, or documentation without obligation to notify any individual or entity. Please have your proof of purchase receipt to get warranty support. All defective products shall be returned with a copy of proof of purchase. In no event shall Buffalo Technology’s liability exceed the price paid for the product from direct, indirect, special, incidental, or consequential damages resulting from the use of the product, its accompanying software, or its documentation. Buffalo Technology does not offer refunds for any product. Contact Information North America (USA / Canada) ADDRESS Buffalo Technology (USA), Inc. 4030 West Braker Lane, Suite 120 Austin, TX 78759-5319 GENERAL INQUIRIES Monday through Friday 8:30am-5:30pm CST Direct: 512-794-8533 Toll-free: 800-456-9799 Fax: 512-794-8520 Email: sales@buffalotech.com TECHNICAL SUPPORT North American Technical Support by phone is available 24 hours a day, 7 days a week. (USA and Canada). Toll-free: (866) 752-6210 Email: info@buffalotech.com Contact Information Europe ADDRESS Buffalo Technology UK LTD 176, Buckingham Avenue, Slough, Berkshire, SL1 4RD United Kingdom GENERAL INQUIRIES Tel: +44 (0) 1753 555000 Fax: +44 (0) 1753 535420 E-mail: sales@buffalo-technology.com TECHNICAL SUPPORT European Technical Support is available between the hours of 9am-6pm (GMT) Monday to Thursday and 9am-4:30pm (GMT) Friday for this product. Customers in Europe can obtain Technical Support using the following information: • Telephone UK only: 08712 50 12 60 Elsewhere: +353 61 708 050 • Email: helpdesk@buffalo-technology.ie • Web www.buffalo-technology.com • Online Help Available on the enclosed AirNavigator CD. 42 Contact Information At Buffalo Technology, we constantly update our software and firmware. For the most recent software, firmware, driver, and technical whitepaper releases available, please visit the Buffalo Technology website: www.buffalotech.com. 43
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No XMP Toolkit : 3.1-702 About : 1d33b453-aaca-11d9-a7c0-e0f8d53bf73b Create Date : 2006:06:14 10:10:44-05:00 Modify Date : 2006:06:15 17:09:55+09:00 Metadata Date : 2006:06:15 17:09:55+09:00 Creator Tool : Adobe InDesign CS2 (4.0.2) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 7855 bytes, use -b option to extract) Version ID : 1 Instance ID : uuid:7fb31d5c-efab-4793-bd28-091ee47e34db Document ID : adobe:docid:indd:bb320b38-fb11-11da-b570-85f16e79c6c5 Rendition Class : proof:pdf Derived From Instance ID : 6a09788a-eb67-11da-8a45-a508b6b5a9cf Derived From Document ID : adobe:docid:indd:ad7dc642-be7e-11da-b819-9e2828bc22d2 Derived From Version ID : 1 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 300.00, 350.00, 300.00, 300.00, 300.00, 300.00, 300.00, 350.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 72.00, 72.00, 600.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 225.00, 300.00, 225.00, 300.00, 300.00, 300.00, 300.00, 300.00, 350.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Y Resolution : 300.00, 350.00, 300.00, 300.00, 300.00, 300.00, 300.00, 350.00, 300.00, 300.00, 300.00, 72.00, 72.00, 300.00, 72.00, 72.00, 300.00, 72.00, 300.00, 72.00, 72.00, 600.00, 72.00, 300.00, 300.00, 72.00, 300.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 72.00, 300.00, 300.00, 225.00, 300.00, 225.00, 300.00, 300.00, 300.00, 300.00, 300.00, 350.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00, 300.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Document ID : adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:0B70407409FBDA118374AA3D3C7E69EF, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:29A70E86CFB2DA1183F19A12EF83039A, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:78F1B3C4D0B2DA1183F19A12EF83039A, uuid:E2950217D1B2DA1183F19A12EF83039A, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:E7950217D1B2DA1183F19A12EF83039A, uuid:20A70E86CFB2DA1183F19A12EF83039A, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:CAB812D3CF9FDA11BFE7A36DFF4104D9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:83F44DFBCF9FDA11BFE7A36DFF4104D9, uuid:81978C8B42AADA118BFC89CEC1DDCCA3, uuid:3E2E0CDD6FEADA119789AB5E44405EE2, uuid:D2147FA673EADA119789AB5E44405EE2, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:CAB812D3CF9FDA11BFE7A36DFF4104D9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:2C1C874FD09FDA11824FE6E8455C4435, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:09449FE4CF9FDA11BFE7A36DFF4104D9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:83F44DFBCF9FDA11BFE7A36DFF4104D9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:88F44DFBCF9FDA11BFE7A36DFF4104D9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:22212116D09FDA11BFE7A36DFF4104D9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:8b7ef40a-7a97-11d8-89b0-c04fd9537eb9, adobe:docid:photoshop:7625f2f0-7a95-11d8-89b0-c04fd9537eb9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:7625f2ef-7a95-11d8-89b0-c04fd9537eb9, adobe:docid:photoshop:7625f2ee-7a95-11d8-89b0-c04fd9537eb9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:994b4744-7a97-11d8-89b0-c04fd9537eb9, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, uuid:0B70407409FBDA118374AA3D3C7E69EF, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8, adobe:docid:photoshop:25234607-f213-11d9-a2d3-a7088d1042d8 Manifest Reference Instance ID : uuid:0C70407409FBDA118374AA3D3C7E69EF, uuid:877C7D1C7CBEDA11AD61BD398501A505, uuid:79F1B3C4D0B2DA1183F19A12EF83039A, uuid:E3950217D1B2DA1183F19A12EF83039A, uuid:E8950217D1B2DA1183F19A12EF83039A, uuid:21A70E86CFB2DA1183F19A12EF83039A, uuid:CBB812D3CF9FDA11BFE7A36DFF4104D9, uuid:84F44DFBCF9FDA11BFE7A36DFF4104D9, uuid:740bf55f-ba98-41a2-a6f6-96d5ca5af4f4, uuid:0D565FC474EADA119789AB5E44405EE2, uuid:06565FC474EADA119789AB5E44405EE2, uuid:CBB812D3CF9FDA11BFE7A36DFF4104D9, uuid:32217B5AD09FDA11824FE6E8455C4435, uuid:0A449FE4CF9FDA11BFE7A36DFF4104D9, uuid:84F44DFBCF9FDA11BFE7A36DFF4104D9, uuid:89F44DFBCF9FDA11BFE7A36DFF4104D9, uuid:23212116D09FDA11BFE7A36DFF4104D9, uuid:0C70407409FBDA118374AA3D3C7E69EF Format : application/pdf Producer : Adobe PDF Library 7.0 Trapped : False Has XFA : No Page Count : 53 Creator : Adobe InDesign CS2 (4.0.2)EXIF Metadata provided by EXIF.tools