BUFFALO 09102104-0 N450 Wireless-N USB Adaptor User Manual WLI UC G450
BUFFALO INC. N450 Wireless-N USB Adaptor WLI UC G450
BUFFALO >
User Man_FDI-09102104-0
User Manual
AirStation Nniti Wireless USB Adapter
WLI-UC-G450
www.buffalotech.com
35012280 ver.01
WLI-UC-G450 User Manual 1
Contents
Chapter 1 - Product Overview .........................................4
Features .................................................................................. 4
450 Mbps High Speed Mode ................................................... 4
System Requirements ............................................................. 5
Package Contents ................................................................... 5
Hardware Overview ................................................................. 5
Chapter 2 - Installation .....................................................6
Installing Wireless Drivers ....................................................... 6
Installing Utility ........................................................................ 10
Chapter 3 - Connect to a Wireless Network ...................13
Automatic Secure Setup (AOSS / WPS) ................................. 13
Windows 7 or Vista (Client Manager V) ......................................... 14
Windows XP (Client Manager 3) .................................................... 15
Automatic Secure Setup (WPS PIN) ....................................... 16
Windows 7 or Vista (Client Manager V) ......................................... 16
Windows XP (Client Manager 3) .................................................... 20
Manual Setup (Client Manager) .............................................. 22
Windows 7 or Vista (Client Manager V) ......................................... 22
Windows XP (Client Manager 3) .................................................... 25
Manual Setup (Windows Utility) .............................................. 26
Windows Vista (WLAN AutoCong) ............................................... 27
Windows XP (Wireless Zero Conguration) ................................... 30
WLI-UC-G450 User Manual 2
Chapter 4 - Client Manager ..............................................31
Software Overview .................................................................. 31
Using Client Manager V .......................................................... 31
Opening and Closing Client Manager ............................................ 31
Main Screen ................................................................................... 32
Automatic Secure Setup and Advanced Setup .............................. 33
SSID / WPS-PIN selection ............................................................. 34
Searching Wireless Access Points ................................................. 35
Wireless Network Information ........................................................ 36
WPS-PBC / AOSS selection .......................................................... 37
Wireless Status .............................................................................. 38
Wireless LAN Diagnostic ............................................................... 40
Prole List ...................................................................................... 41
Wireless Properties ........................................................................ 42
Network Properties ........................................................................ 43
Browser Properties ........................................................................ 44
Printer Properties ........................................................................... 45
Using Client Manager 3 ........................................................... 46
Status ............................................................................................. 47
Scan ............................................................................................... 49
Connect .......................................................................................... 50
Proles ........................................................................................... 51
Prole Information (Basic) .............................................................. 52
Prole Information (Network) ......................................................... 54
Prole Information (Browser) ......................................................... 55
Prole Information (Printers) .......................................................... 56
System Tray Menu ......................................................................... 57
Option Menu .................................................................................. 58
WLI-UC-G450 User Manual 3
Chapter 5 - Trouble Shooting ..........................................60
The Computer does not Recognize the Wireless Adapter. ..... 60
You Cannot Connect to the Network Wirelessly. ..................... 60
You Forgot the AP’s SSID, Encryption Key, or Password. ...... 60
The Link Speed is Slower than 450 Mbps............................... 61
Other Tips ................................................................................ 61
Appendix .....................................................................64
450 Mbps Mode Settings ........................................................ 64
Specications .......................................................................... 65
Dismounting ............................................................................ 66
Uninstalling the Software ........................................................ 66
Uninstalling the Drivers ........................................................... 66
TCP/IP Settings in Windows ................................................... 67
Windows 7 ..................................................................................... 67
Windows Vista ............................................................................... 68
Windows XP ................................................................................... 69
Compliance Information .......................................................... 70
Environmental Information ...................................................... 76
Warranty Information ............................................................... 77
WLI-UC-G450 User Manual 4
Chapter 1 - Product Overview
Features
With support for current Wireless-N, Wireless-G, and Wireless-B standards, the AirStation can transfer
data to and from all standard 2.4 GHz wireless network devices.
This device includes support for AOSS (AirStation One-touch Secure System) and WPS (Wi-Fi
Protected Setup), making connection with other wireless devices easier.
The following types of encryption are supported:
• WPA-PSK (TKIP / AES)
• WPA2-PSK (TKIP / AES)
• WEP (128-bit / 64-bit)
450 Mbps High Speed Mode
450 Mbps is the link speed when using 2 channel Wireless-N mode. It represents actual wireless
data speeds, including overhead. Because the overhead is not available for user data transfer, usable
wireless throughput will be substantially slower.
ACT LED (Blue)
Flashes when sending or receiving data.
Chapter 1 Product Overview
WLI-UC-G450 User Manual 5
System Requirements
Computer should be IBM/PC compatible (OADG specication) with a USB 2.0 port and a CD-ROM drive.
This product does not support computers equipped with dual processors (computers with two
physical CPUs). Computers with Dual core CPU's are supported.
Compatible OS
Windows 7 (32-bit or 64-bit), Vista (32-bit), XP (32-bit)
Service Pack 2 or later is required for Windows XP.
Package Contents
The following items are included with your AirStation. If any of the items are missing, please contact
your vender.
• Main unit ......................................................................................................................................... 1
• USB cable ........................................................................................................................................ 1
• Air Navigator CD ........................................................................................................................... 1
• Quick Setup Guide....................................................................................................................... 1
Hardware Overview
WLI-UC-G450 User Manual 6
Chapter 2 - Installation
Installing Wireless Drivers
Follow the instruction below to install drivers. Do not connect the AirStation to your computer yet.
1
2
Boot your computer and insert the AirNavigator CD. The setup wizard will launch automatically.
Note: If the setup wizard doesn’t launch, double click [My Computer] > CD-ROM drive icon > [AirNavi.exe] to
launch manually.
Click [Begin Installation].
3Click [AirStation Wireless LAN Adapters].
Chapter 2 Installation
WLI-UC-G450 User Manual 7
4Disable any rewalls and click [Next].
5Click [Install].
6Click [Next].
Note: • Check “Install Wireless Client Manager” to
install Client Manager after the drivers.
• Refer to page 10 to install Client Manager
later.
WLI-UC-G450 User Manual 8
Chapter 2 Installation
7Read the license agreement, select [Agree],
then click [Next].
8Check “Always trust software from "BUFFALO
INC.”, and click [Install].
9When the screen to the left is displayed, attach
the AirStation to your computer. Drivers will
be installed automatically.
Chapter 2 Installation
WLI-UC-G450 User Manual 9
10 Click [OK].
11 After the drivers are installed, the screen at
left will be displayed. Click [Finish].
Note: If you checked the box to Install Wireless Client
Manager (page 7), then the installation screen
for Client Manager will be displayed after this
screen. Follow the instructions on the screen to
install Client Manager.
Drivers are now installed.
WLI-UC-G450 User Manual 10
Chapter 2 Installation
Installing Utility
Follow the procedure below to install “Client Manager”.
1Boot your computer and insert the AirNavigator CD. The setup wizard will launch automatically.
Note: If the setup wizard is not displayed, double-click [My Computer] > CD-ROM drive icon > [AirNavi.exe].
Click [Options].
Click [Advanced Installation].
2
3
Chapter 2 Installation
WLI-UC-G450 User Manual 11
4Check the box for “Install Wireless Client
Manager” and click [Install].
Note: Use Client Manager V with Windows 7/Vista or
Client Manager 3 with Windows XP.
5Click [Next].
6Read the license agreement and select [Agree].
WLI-UC-G450 User Manual 12
Chapter 2 Installation
7
8
9
Click [Next].
Click [OK].
Click [Back].
10 Click “X” at the top right corner of the window
to close it.
Client Manager is now installed.
WLI-UC-G450 User Manual 13
Automatic Secure Setup (AOSS / WPS)
AOSS and WPS are systems which enables you to automatically congure wireless LAN settings. Just
pressing the buttons will connect wireless devices and complete security settings. Utilize this system
to connect to wireless devices, computers, or game machines which support AOSS or WPS.
AOSS (AirStation One-Touch Secure System) is technology developed by Bualo Technology.
WPS was created by the Wi-Fi Alliance.
Chapter 3 - Connect to a Wireless Network
ÐÏ×ÅÒ
ÓÅÃÕÒÉÔÙ
×ÅÉÒÅÌÅÓÓ
ÒÏÕÔÅÒ
ÄÉÁÇ
őŖŔʼn
őŖŔʼn
Modem
Internet
AirStation PC or
Game console
(AOSS Devices)
Before using AOSS or WPS, install Client Manager software from the CD. See chapter 2 for
instructions on installing Client Manager software.
WLI-UC-G450 User Manual 14
Chapter 3 Connect to a Wireless Network
1
2
Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [Client Manager V].
Windows 7 or Vista (Client Manager V)
If you are using Windows 7 or Vista, use the included Client Manager V software to connect wirelessly
with AOSS or WPS.
Click [Create Pro le].
3The User Account Control screen is displayed. Click [Yes] or [Continue].
4
Click the [WPS AOSS] button.
Chapter 3 Connect to a Wireless Network
WLI-UC-G450 User Manual 15
When “Connection has been Completed” is displayed in Client Manager V, your connection is
complete. If “Set Network Location” is displayed, select “Home”, “Work”, or “Public location”
depending on the environment in which the AirStation will be used.
2
Windows XP (Client Manager 3)
If you are using Windows XP, use the included Client Manager 3 software to connect wirelessly with
AOSS or WPS.
1Right-click on the icon in the system tray and select [Pro le].
Click the [WPS AOSS] button.
Your connection is complete when the message “Security setup and connection have been
completed” is displayed.
WLI-UC-G450 User Manual 16
Chapter 3 Connect to a Wireless Network
Automatic Secure Setup (WPS PIN)
WPS can use a PIN generated by the Client Manager utility to easily connect to an access point that
supports WPS PIN.
To use WPS PIN, rst install Client Manager software on your computer. See chapter 2 for
instructions on installing Bualo Client Manager software.
Windows 7 or Vista (Client Manager V)
The procedure for connecting to an access point with a WPS PIN is described below.
1
2
Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [Client Manager V].
Click [Create Prole].
3The User Account Control screen is displayed. Click [Yes] or [Continue].
Chapter 3 Connect to a Wireless Network
WLI-UC-G450 User Manual 17
4
Click [Advanced Setup].
5
Click [WPS-PIN].
WLI-UC-G450 User Manual 18
Chapter 3 Connect to a Wireless Network
6
Carefully copy the PIN to a piece of
paper, then click [Next].
7
Select the access point to connect
to, then click [Next].
This screen will be displayed.
Chapter 3 Connect to a Wireless Network
WLI-UC-G450 User Manual 19
8Use a PC with a wired Ethernet connection to log in to the access point’s management utility.
Note: If the access point you are trying to connect is a Bu alo AirStation, click Wireless Con g > WPS from the
home page of the con guration interface. The screen to enter the PIN code will be displayed.
9Navigate to the WPS PIN
con guration screen, then enter
the PIN that you write down in
step 6.
Note: If the access point you are
trying to connect is a Bu alo
AirStation, enter the PIN in
“Enrollee PIN” eld and click
[OK].
When “Connection has been Completed” is displayed in Client Manager V, your connection is
complete. If “Set Network Location” is displayed, select “Home”, “Work”, or “Public location”
depending on the environment in which the AirStation will be used.
WLI-UC-G450 User Manual 20
Chapter 3 Connect to a Wireless Network
Windows XP (Client Manager 3)
If you are using Windows XP, use your Client Manager 3 software to connect wirelessly with WPS PIN.
1Right click on the icon in the system tray and select [Easy Connection] > [WPS PIN Code
type].
2
Carefully copy the PIN to a piece
of paper, then click [Next].
3
Select the access point to connect
to, then click [Next].
Chapter 3 Connect to a Wireless Network
WLI-UC-G450 User Manual 21
This screen will be displayed.
4Use a PC with a wired Ethernet connection to log in to the access point’s management utility.
Note: If the access point you are trying to connect is a Bu alo AirStation, click Wireless Con g > WPS from the
home page of the con guration interface. The screen to enter the PIN code will be displayed.
5Navigate to the WPS PIN
con guration screen, then enter
the PIN that you write down in
step 2.
Note: If the access point you are
trying to connect is a Bu alo
AirStation, enter the PIN in
“Enrollee PIN” eld and click
[OK].
When “Connection has been Completed” is displayed in Client Manager 3, your connection is
complete.
WLI-UC-G450 User Manual 22
Chapter 3 Connect to a Wireless Network
Manual Setup (Client Manager)
You may also connect to an access point manually, without using AOSS or WPS. The procedure varies
depending on the version of Windows used.
First, install Client Manager from the included CD. See chapter 2 for instructions on installing Client
Manager.
Windows 7 or Vista (Client Manager V)
With Windows 7 or Vista, use Client Manager V to connect wirelessly.
1
2
Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [Client Manager V].
Click [Create Prole].
3The User Account Control screen is displayed. Click [Yes] or [Continue].
Chapter 3 Connect to a Wireless Network
WLI-UC-G450 User Manual 23
4
Click [Advanced Setup].
5Click [Connect Manually].
WLI-UC-G450 User Manual 24
Chapter 3 Connect to a Wireless Network
6
Select your access point, then
click [Next].
7
Enter your Network Type, Security
Type, Encryption Method, and
Encryption Key (passphrase), then
click [Connect].
When “Connection has been completed” is displayed, your connection is complete. If “Set Network
Location” is displayed, select “Home”, “Work”, or “Public location”, depending on the environment in
which the AirStation will be used.
Chapter 3 Connect to a Wireless Network
WLI-UC-G450 User Manual 25
Windows XP (Client Manager 3)
Client Manager 3 is a wireless connection utility for Windows XP.
2
1Right-click on the icon in the system tray, and select [Scan].
Select the access point to connect to
and click [Next].
3
Choose your Encryption Method
and enter an Encryption Key. Click
[Connect].
Follow the instructions on the screen to connect.
WLI-UC-G450 User Manual 26
Chapter 3 Connect to a Wireless Network
Manual Setup (Windows Utility)
You can connect to an access point without installing or using Client Manager. Windows includes a
built-in wireless utility. The procedure varies depending on the version of Windows used.
Windows 7 (WLAN AutoCong)
With Windows 7, use WLAN AutoCong to connect to the AirStation.
1Click on the network icon in the system tray.
2Select the target AirStation’s name and click
[Connect]. If you will be connecting to this
device in the future, checking [Connect
automatically] is recommended.
3Enter the encryption key and click [OK].
Follow the instructions on the screen to connect.
Chapter 3 Connect to a Wireless Network
WLI-UC-G450 User Manual 27
1Right-click on the wireless network icon in the system tray.
2Click [Connect to a network].
Select your wireless network and click
[Connect].
3
Windows Vista (WLAN AutoCong)
You can use WLAN AutoCong to connect to a wireless access point:
WLI-UC-G450 User Manual 28
Chapter 3 Connect to a Wireless Network
If the screen below is displayed, click [I want to enter the network key or passphrase instead]. Go to
step 4.
Chapter 3 Connect to a Wireless Network
WLI-UC-G450 User Manual 29
Enter the encryption key and click [Connect].
4
Step through the wizard to complete conguration. If the “Set Network Location” screen is displayed,
select “Home”, “Work”, or “Public location“ depending where you’re using the AirStation.
WLI-UC-G450 User Manual 30
Chapter 3 Connect to a Wireless Network
Windows XP (Wireless Zero Conguration)
Windows XP includes a built-in utility to connect to your wireless Access Point.
Note: If Client Manager 3 is installed on your computer, then Wireless Zero Conguration is disabled. Uninstall Client
Manager 3 to use Wireless Zero Conguration, or just use Client Manager 3 to connect to the AirStation.
1Right-click on the wireless network icon in the system tray.
2Click [View Available Wireless Networks].
Select a wireless network, then click [Connect].
3
Enter the encryption key (passphrase) twice,
then click [Connect].
4
When the connection is complete, the word “Connected” will be displayed to the right of the
network’s SSID. Click the “X” in the top right corner of the window to close the utility.
WLI-UC-G450 User Manual 31
Chapter 4 - Client Manager
Software Overview
Client Manager is utility software used to connect to an access point on the network or to verify the
connection between an access point and your computer. It is included with this device.
Note: Two versions of Client Manager are included on your AirNavigator CD. Client Manager V supports Windows 7
and Vista. Client Manager 3 supports Windows XP. The installation program will install the correct version for
your operating system.
Using Client Manager V
Opening and Closing Client Manager
• When you install Client Manager, it will be added to your Startup folder and will automatically
launch with Windows. If Client Manager does not launch automatically, click [Start] > [All Programs
]> [BUFFALO] > [AirStation Utility] > [ClientManager V] to launch it.
• To close Client Manager, right-click on its icon in the system tray and choose [Exit].
• The appearance of the Client Manager icon varies according to its connection status.
: No wireless connection.
Communicating via an access point.
WLI-UC-G450 User Manual 32
Chapter 4 Client Manager
Parameter Meaning
Prole Displays information about the current connection points.
If you have multiple connection points, you can switch among
them.
Transmission Speed Displays the current connection speed.
Signal Strength Displays the current signal strength.
Create Prole Click this to display the Automatic Secure Setup and Advanced
Setup screen (next page).
Advanced Click this to display the Wireless Status screen.
Main Screen
The Main screen displays the current connection status. You can perform the following operations
from this screen.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 33
Parameter Meaning
Wireless Adapter Displays names of currently used wireless devices.
Automatic Secure Setup Clicking this will search for an AOSS or WPS compatable access
point to connect to automatically.
Advanced Setup Click this to congure your wireless settings manually. It will
display the SSID/WPS-PIN selection screen (next page).
Option (Expert only) Click this to specify whether you use AOSS or WPS (PBC) for
connection in Automatic Secure Setup. It displays the WPS-PBC/
AOSS selection screen (page 37).
Automatic Secure Setup and Advanced Setup
There are two ways to connect to an access point: automatic or manual. In the following wizard,
automatic setup will be reered to as “AOSS/WPS” and manual setup will be referred to as “Advanced
Setup”.
WLI-UC-G450 User Manual 34
Chapter 4 Client Manager
Parameter Meaning
Connect Manually Specify SSID of an access point and congure connection settings.
Click here to display the Searching Wireless Access Points screen
(next page).
Connect with WPS-PIN Click this to connect to a wireless access point by entering its WPS
PIN.
SSID / WPS-PIN selection
This screen lets you select whether to connect to an access point by specifying the SSID or by enter-
ring a WPS PIN.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 35
Parameter Meaning
Network Name (SSID) Displays the SSID of each available access point.
Security Displays whether or not the access point uses encryption.
Channel Displays the wireless channel used by an access point.
Strength Displays the signal strength of an access point.
Enter the Network Name (SSID)
manually
Click this to enter an SSID manually and display the Wireless
Network Information screen (page 36).
[Search] Click here to search for available access points again.
[Next] Click this to display the Wireless Network Information screen (page
36).
Searching Wireless Access Points
The screen to list available wireless access points in your area. You can select an access point and
enter network information manually to connect.
WLI-UC-G450 User Manual 36
Chapter 4 Client Manager
Parameter Meaning
Network Type Select a type of connection.
Network Name (SSID) Enter the SSID of an access point.
Security Type Select the security type of the selected access point.
Encryption Method Select the encryption method of the selected access point.
Encryption Key or Passphrase Enter the encryption key for the access point.
Connect to a network which does not
broadcast the SSID
Check this box to connect to a hidden SSID that is not broadcast.
Connect Connect to the access point.
Wireless Network Information
Congure wireless connection settings.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 37
Parameter Meaning
Automatic Secure Setup WPS-PBC
method
Click this to automatically connect to an access point that supports
WPS.
Automatic Secure Setup AOSS
method
Click this to automatically connect to an access point that supports
AOSS.
WPS-PBC / AOSS selection
You may automatically connect to an access point by just pushing or clicking two buttons with WPS
or AOSS.
WLI-UC-G450 User Manual 38
Chapter 4 Client Manager
Parameter Meaning
Adapter Displays the name of the current wireless client.
Execute wireless LAN diagnostics Opens the Wireless LAN Diagnoses wizard (page 40).
Prole Name Displays the current prole name.
Status Displays the current transmission status.
Network Mode Displays the current network mode.
Transmission Speed Displays the current transmission speed.
SSID Displays SSID of the currently connected access point.
Channel Displays the wireless channel currently used.
Wireless Status
This screen displays the current connection status.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 39
Parameter Meaning
Security Displays whether encryption is currently enabled or not.
Authentication Type Displays the type of authentication currently used.
Encryption Type Displays the type of encryption currently used.
Signal Strength Displays the current signal strength.
IP Address Displays the IP address assigned to your wireless client.
Subnet Mask Displays the subnet mask assigned to your wireless client.
Default Gateway Displays the default gateway address.
Primary DNS Displays the primary DNS address.
Secondary DNS Displays the secondary DNS address.
MAC Address Displays the MAC address of your wireless client.
WLI-UC-G450 User Manual 40
Chapter 4 Client Manager
Wireless LAN Diagnostic
On the Wireless LAN Diagnostic screen, you can check signal strength and quality.
Parameter Meaning
Adapter Displays the name of the wireless client currently in use.
Connection status Displays signal strength (dBm), link rate (Mbps), and signal quality
(%) in 1 minute intervals.
There are the following restrictions.
• Some items may not be displayed depending on your wireless
device.
• Signal strength and quality displays may vary depending on
wireless devices.
These graphs should not be used to compare dierent wireless
devices. Use this information to check wireless status for the
same wireless device.
Usage of each channel The 11b/11g displays usage of each channel on 2.4 GHz.
The color expresses the signal strength of an access point. Closer to
red means stronger signal, and closer to blue means weaker signal.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 41
Prole List
Create a new prole or edit an existing prole.
Parameter Meaning
Adapter Displays the name of the wireless client which is currently used.
New Create a new prole. Click this to display the Automatic Secure
Setup and Advanced Setup screen (page 33).
Edit Edit the selected prole. Click this to display the Extended
properties (Wireless) screen (page 42).
Delete Delete the selected prole.
Down Lower the priority of the selected prole.
Up Raise the priority of the selected prole.
WLI-UC-G450 User Manual 42
Chapter 4 Client Manager
Wireless Properties
Current wireless settings.
Parameter Meaning
Connection Displays the current prole name.
SSID Displays the SSID of the current connection.
Security Type Displays the security type you are using for the current connection.
Encryption Type Displays the encryption type you are using for the current connection.
Security key or Pass phrase Displays the security key or pass phrase if “Display password
visible“ is checked.
Connect an access point even SSID
broadcasting is disabled.
Check to connect to a wireless network that doesn’t broadcast
its SSID.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 43
Network Properties
By default, your client’s IP address is set automatically by DHCP. You may congure it manually from
this screen.
Parameter Meaning
Do not change IP Address settings of
this Prole
Select to keep your current TCP/IP network setting without any
changes. This is the recommended setting.
Use the following settings Select this option to change your TCP/IP network settings. For
expert users only.
WLI-UC-G450 User Manual 44
Chapter 4 Client Manager
Browser Properties
Congure Internet Explorer settings for wireless connections.
Parameter Meaning
Do not change the browser settings
of this Prole
Select to keep the current Internet Explorer settings.
Use the following settings Select this option to configure the Internet Explorer Home Page
and Proxy Server settings while connected wirelessly.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 45
Printer Properties
Congure the printer used while connected to an access point wirelessly.
Parameter Meaning
Do not change the printer settings of
this Prole
Select to keep your current printer settings.
Use the following settings Select to use a dierent default printer while connected wirelessly.
WLI-UC-G450 User Manual 46
Chapter 4 Client Manager
Using Client Manager 3
• When you install Client Manager, it will be added to your Startup folder and will automatically start
with Windows. To launch Client Manager manually, click [Start] > [All Programs] > [BUFFALO] >
[AirStation Utility] > [ClientManager3].
• Right-click on the Client Manager icon in the system tray and click [Exit] to close Client Manager.
The Client Manager icon will change appearance according to its connection status:
: No wireless client installed
: Not connected to an access point
: Transmitting to an access point with TKIP/AES encryption
: Transmitting to an access point with WEP, or not encrypted
: Transmitting in ad-hoc mode (not supported with this wireless client)
: Authenticating
Chapter 4 Client Manager
WLI-UC-G450 User Manual 47
Status
The Status screen displays the current connection status.
Parameter Meaning
Prole Current connection prole name.
SSID SSID of the currently connected access point.
Adapter Name Name of the wireless client currently in use.
Network Type Current network mode.
Transmission Speed Current transmission speed.
Channel Current wireless channel.
Security Displays whether security is currently enabled or not.
IP Address The IP address assigned to this unit.
WLI-UC-G450 User Manual 48
Chapter 4 Client Manager
Parameter Meaning
MAC Address MAC address of this unit.
Duration Elapsed duration of the current wireless connection.
Signal Strength Current signal strength.
Reconnect Click to reconnect the most recent connection.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 49
Scan
Scan and display nearby access points.
Parameter Meaning
SSID SSID of access point.
Wireless mode Wireless type (such as 11a and 11g) of the access point.
Channel Wireless channel of the access point.
Strength Reception strength of each access point.
Encryption Displays if security is used by the access point.
Connect Click this to display the Connect screen (page 50).
Refresh Click here to search for available access points again.
WLI-UC-G450 User Manual 50
Chapter 4 Client Manager
Connect
Congure connection to an access point.
Parameter Meaning
Encryption Method Type of encryption used by the access point.
Encryption Key Enter the access point’s encryption key (pass phrase).
Register Prole Check to register this connection as a prole.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 51
Proles
Connect to an access point or edit a prole.
Parameter Meaning
Connect Selecting a prole and clicking this button will connect to an access
point using a stored prole.
Add Click this to add a new prole. It will display the Proles Information
screen (next page).
Edit Click this to edit or delete information in a prole.
WPS AOSS Click this button to have AOSS/WPS (PBC) automatically set security.
After connection, a prole based on these settings will be created.
802.1x Proles This button is displayed when Client Manager is operating in
Business Mode. Click to congure 802.1x authentication.
WLI-UC-G450 User Manual 52
Chapter 4 Client Manager
Prole Information (Basic)
Congure your prole settings.
Parameter Meaning
Display Icon Select an icon to display on the prole from the list.
Select Prole Connection may be wireless or wired (Ethernet). For use with the
AirStation, select Wireless.
Prole Name Enter a name for the prole.
Network Type Select infrastructure mode to connect to an access point
(recommended), or ad-hoc mode to connect directly to another
wireless client.
SSID Select the SSID of the wireless access point that the prole will
connect to.
Channnel Choose the wireless channel. In Infrastructure Mode, the channel is
automatically congured.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 53
Parameter Meaning
Encryption Method Select the encryption method used by the wireless access point.
Transmission Key If WEP is used for the Encryption Method, 4 pass phrases may be
entered. Use of the rst (at least) is recommended.
Encryption Key Enter the encryption key (pass phrase) for the access point.
AP is set to exclusive connection Check if the access point’s SSID is not broadcast.
WLI-UC-G450 User Manual 54
Chapter 4 Client Manager
Prole Information (Network)
The prole’s IP address and subnet mask may be manually assigned.
Parameter Meaning
Do not change IP Address settings of
this Prole
Check to keep using current TCP/IP network settings.
Automatically acquire the IP Address Check to automatically acquire the IP address from a DHCP server
when connecting wirelessly.
Automatically acquire the DNS Server
Address
Check to automatically acquire the DNS server address from a
DHCP server when connecting wirelessly.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 55
Prole Information (Browser)
Congure your Internet Explorer settings when connecting wirelessly.
Parameter Meaning
Do not change the browser settings
of this Prole
Check to use current Internet Explorer settings when connecting
wirelessly. Uncheck to use any of the settings below.
Address to use as Home Page To use a dierent home page in Internet Explorer when connecting
wirelessly, enter it here.
Use the Proxy Server To use a proxy server for Internet Explorer when connecting
wirelessly, enter its IP address and a port number and check the
box.
Do not use the proxy server for a local
address
If checked, the proxy server will not be used for local addresses.
WLI-UC-G450 User Manual 56
Chapter 4 Client Manager
Prole Information (Printers)
Congure the printer that your computer uses when connected wirelessly.
Parameter Meaning
Do not change the printer settings of
this Prole
Select this option to use a dierent printer when connecting
wirelessly.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 57
System Tray Menu
Right-click on the Client Manager icon in the system tray to display the following choices.
Parameter Meaning
Status Displays the Status screen (page 47).
Scan Displays the Scan screen (page 49).
Prole Displays the Proles screen (page 51).
Easy Connection Runs Automatic Secure Setup, using one of the following
connection methods: AOSS, WPS(PBC), or WPS(PIN).
Help Displays Client Manager Help.
Option Displays the Options menu screen (page 58).
Version Information Displays Client Manager version information.
Exit Exits Client Manager.
WLI-UC-G450 User Manual 58
Chapter 4 Client Manager
Option Menu
Congure Client Manager options.
Parameter Meaning
Mode Switch between Client Manager’s operating modes. If you select
“Business Mode”, the button to congure 802.1x authentication
appears on the Proles screen (Page 51). “Home Mode” is
recommended.
Lock If you click this, you will not be able to add new proles or edit
existing proles. To lock or unlock, enter the password (8 - 63
characters).
Export a prole Click this to save the currently registered prole information. To
save prole information, enter the password ( 8 - 63 characters).
Import a prole Click this to import a saved prole into Client Manager. You’ll need
to enter the password for the prole to continue.
Chapter 4 Client Manager
WLI-UC-G450 User Manual 59
Parameter Meaning
Initialize prole Click this to initialize prole information. Before initializing prole
information, unlock the unit.
Use the following network adapter Select a network adaptor to use in Client Manager. “Wireless
Adapter Auto-select“ is recommended for most users.
Automatically connect to the prole
with highest priority
If checked, it will attempt to connect to the prole with highest
priority as assigned on the Prole screen (page 51). Checked is
recommended for most users.
WLI-UC-G450 User Manual 60
Chapter 5 - Trouble Shooting
The Computer does not Recognize the Wireless
Adapter.
• Make sure that the AirStation is connected to a USB port on your computer.
• If your computer has multiple USB ports, connect to a dierent USB port.
• Refer to chapter 2 to reinstall drivers for this unit.
You Cannot Connect to the Network Wirelessly.
• Refer to chapter 3 to connect this unit to an access point wirelessly.
• Congure the same SSID, encryption method, and encryption key for each wireless device.
These settings must match those of your wireless access point.
• move your wireless devices closer to the access point.
• Restart your access point.
You Forgot the AP’s SSID, Encryption Key, or
Password.
• Ask your network administrator about your SSID and encryption settings. These settings must
match the SSID and encryption settings of the access point.
• If your access point supports AOSS or WPS, try using them to connect to the access point.
Instructions for connecting with AOSS or WPS are in chapter 3.
Chapter 5 Trouble Shooting
WLI-UC-G450 User Manual 61
The Link Speed is Slower than 450 Mbps.
The default setting for 450 Mbps mode on the AirStation is “o”. Refer to "450 Mbps Mode settings"
on page 64 to turn on 450 Mbps mode.
Other Tips
Issue:
When using the Windows wireless connection manager, I cannot connect to my wireless router. I
receive a "Cannot congure wireless network" error message when scanning for available wireless
networks.
Answer:
Another wireless client software may be installed on your computer that is taking control of the
wireless client adapter away from the Windows connection manager. Either switch to the other
software or use Add/Remove Programs to remove the conicting client software. After rebooting,
the Windows connection manager should be able to connect to the available wireless networks.
Issue:
When I attempt to connect to my wireless router, I receive an error message indicating that security
settings on my computer do not match the settings on the router.
Answer:
Manually enter the correct security key and encryption type into the Windows connection manager.
To enter the security key in Windows XP:
Go to View Available Wireless Networks and select change Advanced Settings. Click on the Wireless
Networks tab. There will be a list of networks to which you have previously connected. Highlight the
network name (SSID) of the wireless router and select Properties. Enter the correct encryption key
and select correct the encryption type as congured on the wireless router.
Go to Connect to Network, right-click on the name of the network and click Properties. Highlight the
name of your network and go to Properties. Enter the correct encryption key and select correct the
encryption type as congured on the wireless router.
WLI-UC-G450 User Manual 62
Chapter 5 Trouble Shooting
Issue:
What can I do if my wireless connection drops randomly or seems slow?
Answer:
There are many environmental factors that may aect this behavior. First, ensure the issue is not
range related by locating the wireless router and the client in closer proximity and check whether
the connection drops continue.
In some cases, interference from other wireless networks or sources such as 2.4 GHz wireless phones
may impact performance. To work around this scenario, change the wireless channel used by your
wireless router.
Log in to the wireless router with your browser. Click on “Wireless Conguration”. If an “Auto-
Channel” option is available, attempt to use this option to remedy the problem. If “Auto-Channel” is
unavailable, manually select an alternate channel.
Issue:
Though I am able to successfully make a connection with my wireless router, I am unable to access
the Internet with my web browser.
Answer:
First, power o the cable or DSL modem, the wireless router, and then your computer. Pressing
the power button or simply unplugging the devices can power o the modem and wireless router
devices. Then after verifying that the modem is connected to the wireless router with a cable to the
WAN port, power on the modem and wait two minutes. Turn on the wireless router and then the
computer. Verify whether an Internet connection is available.
If, after these steps, an Internet connection is still unavailable, power o the cable or DSL modem
and computer again and directly connect your computer to the cable or DSL modem with a cable
between the computer and the port on the modem. Power on the modem and wait two minutes.
Power on the computer and again check for an Internet connection.
If an Internet connection IS NOT available with a direct connection to the computer, please call the
Internet Service Provider who installed the modem.
If an Internet connection IS available with a direct connection to the computer, please call our
customer support line.
Chapter 5 Trouble Shooting
WLI-UC-G450 User Manual 63
Issue:
Where can I download the latest drivers, rmware and instructions for my Bualo wireless products?
Answer:
The latest drivers and rmware with installation instructions are available online at
www.bualotech.com
WLI-UC-G450 User Manual 64
Appendix
450 Mbps Mode Settings
By default, the AirStation’s 450 Mbps mode is disabled. Use the following proceedure to enable it if
desired.
1. Click [Start] > [All Programs] > [BUFFALO] > [AirStation Utility] > [AirStation Bandwidth 20 or
40 MHz Select Tool] and launch the utility software.
If the User Account Control screen is displayed, click [Yes] or [Continue].
2. When the message “Now start the setup wizard of Bandwidth Select Tool” is displayed, click
[Next].
3. Click [Next].
4. When the message "Select wireless adapter" appears, select this unit and click [Next].
5. Select "Use 450 Mbps Mode (40 MHz)", and click [Next].
6. When the message "Wireless adapter setting is completed" is displayed, click [Exit to setup].
If you still cannot establish a 450 Mbps connection, check the settings for your access point.
Appendix
WLI-UC-G450 User Manual 65
Specications
Wireless LAN Interface
Standard Compliance IEEE802.11b / IEEE802.11g / IEEE802.11n
Transmission Method Direct Sequence Spread Spectrum (DSSS), OFDM, MIMO
Frequency Range 2,412 - 2,462 MHz (Channels 1 - 11)
Transmission Rate 802.11b:
11, 5.5, 2, 1 Mbps
802.11g:
54, 48, 36, 24, 18, 12, 9, 6 Mbps
802.11n
20 MHz BW
(Long GI) 175.5, 156, 117, 78, 58.5, 39, 19.5 Mbps (3 stream)
130, 117, 104, 78, 52, 39, 26, 13 Mbps (2 stream)
65, 58.5, 52, 39, 26, 19.5, 13, 6.5 Mbps (1 stream)
(Short GI) 195, 173.3, 130, 86.7, 65, 43.3, 21.7 Mbps (3 stream)
144.4, 130, 115.5, 86.7, 57.8, 43.3, 28.9, 14.4 Mbps (2 stream)
72.2, 65, 57.8, 43.3, 28.9, 21.7, 14.4, 7.2 Mbps (1 stream)
40 MHz BW
(Long GI) 405, 364.5, 324, 243, 162, 121.5, 81, 40.5 Mbps (3 stream)
270, 243, 216, 162, 108, 81, 54, 27 Mbps (2 stream)
135, 121.5, 108, 81, 54, 40.5, 27, 13.5 Mbps (1 stream)
(Short GI) 450, 405, 360, 270, 180, 135, 90, 45 Mbps (3 stream)
300, 270, 240, 180, 120, 90, 60, 30 Mbps (2 stream)
150, 135, 120, 90, 60, 45, 30, 15 Mbps (1 stream)
Access Mode Infrastructure Mode
Security WPA2 (TKIP/AES), WPA-PSK (TKIP/AES), 128-bit / 64-bit WEP
Other
Power Supply 5.0 V Bus powered
Power Consumption 2500 mW (Max)
Dimensions 27 mm x 14 mm x 96 mm (1.1 x 0.6 x 3.8 inch)
Weight 27 g / 0.95 ounces
Operating Environment 0 - 40° C (32 - 104° F), 20-80 % (non-condensing)
WLI-UC-G450 User Manual 66
Appendix
Dismounting
If you use Windows 7, Vista, or XP, just unplug the AirStation.
Uninstalling the Software
To uninstall the software, follow the procedure described below.
1. Insert AirNavigator CD.
When you insert CD, AirNavigator Setup Wizard will launch automatically.
If AirNavigator Setup Wizard is not displayed, double-click My Computer icon > CD-ROM
drive icon > [AirNavi.exe].
2. Click [Options].
3. Click [Uninstall software].
4. Follow the insturctions on the screen to delete the Utility software.
Uninstalling the Drivers
To remove the AirStation wireless client drivers, follow the procedure described below.
1. Insert AirNavigator CD.
When you insert CD, AirNavigator Setup Wizard will launch automatically.
If AirNavigator Setup Wizard is not displayed, double-click My Computer icon > CD-ROM
drive icon > [AirNavi.exe].
2. Click [Options].
3. Click [Remove Drivers].
4. Follow the insturctions on the screen to remove drivers.
Appendix
WLI-UC-G450 User Manual 67
TCP/IP Settings in Windows
Windows 7
To congure TCP/IP in Windows 7, follow the procedure below.
1Click [Start] > [Control Panel] > [Network and Internet].
2Click [Network and Sharing Center].
3Click [Change Adapter Settings] on the left side menu.
4Right-click on [Local Area Connection], then click [Properties].
5If the message “Windows needs your permission to continue” appears, click [Continue].
6Select [Internet Protocol Version 4 (TCP/IPv4)] then click [Properties].
7To have DHCP set your IP address settings automatically, check [Obtain an IP address auto-
matically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each setting. Example:
If the router’s IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
8Click [OK].
WLI-UC-G450 User Manual 68
Appendix
Windows Vista
To congure TCP/IP in Windows Vista, follow the procedure below.
1Click [Start] > [Settings] > [Control Panel].
2Double-click [Network and Sharing Center].
3Click [Manage network connections] on the left side menu.
4Right-click on [Local Area Connection], then click [Properties].
5When the message [Windows needs your permission to continue], click [Continue].
6Select [Internet Protocol Version 4 (TCP/IPv4)], then click [Properties].
7To have DHCP set your IP address settings automatically, check [Obtain an IP address auto-
matically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each setting. Example:
If the router’s IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
8Click [Close].
Appendix
WLI-UC-G450 User Manual 69
Windows XP
To congure TCP/IP in Windows XP, follow the procedure below.
1Click [Start] > [Settings] > [Control Panel].
2Double-click [Network].
3Right-click on [Local Area Connection], then click [Properties].
4Select [Internet Protocol (TCP/IP)], then click [Properties].
5To have DHCP set your IP address settings automatically, check [Obtain an IP address auto-
matically] and [Obtain DNS server address automatically].
To set your IP address settings manually, enter values for each setting. Example:.
If the router’s IP address is 192.168.11.1,
IP address 192.168.11.80
Subnet mask 255.255.255.0
Default gateway 192.168.11.1
Preferred DNS server 192.168.11.1
Alternate DNS server blank
6Click [Close].
WLI-UC-G450 User Manual 70
Appendix
Compliance Information
Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the interference by one of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
Any changes or modications not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Important Note - FCC Radiation Exposure Statement:
The product comply with the US portable RF exposure limit set forth for an uncontrolled
environment and are safe for intended operation as described in this manual. The further RF
exposure reduction can be achieved if the product can be kept as far as possible from the user body
or set the device to lower output power if such function is available.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
SAR compliance has been established in typical laptop computer(s) with USB slot, and product
could be used in typical laptop computer with USB slot. Other application like handheld PC or
similar device has not been veried and may not compliance with related RF exposure rule and such
use shall be prohibited.
Appendix
WLI-UC-G450 User Manual 71
The USB dongle transmitter is approved for use in typical laptop computers. To comply with FCC RF
exposure requirements, it should not be used in other devices or certain laptop and tablet computer
congurations where the USB connectors on the host computer are unable to provide or ensure the
necessary operating congurations intended for the device and its users or bystanders to satisfy RF
exposure compliance requirements.
The availability of some specic channels and/or operational frequency bands are country
dependent and are rmware programmed at the factory to match the intended destination. The
rmware setting is not accessible by the end user.
Industry Canada statement:
Industrie Canada déclaration:
This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the follow-
ing two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause unde-
sired operation.
Ce dispositif est conforme à la norme CNR-210 d’Industrie Canada applicable aux appareils radio
exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer
un fonctionnement indésirable.
Important Note - Radiation Exposure Statement:
Note Importante - Déclaration d’exposition aux radiations:
The product comply with the Canada portable RF exposure limit set forth for an uncontrolled envi-
ronment and are safe for intended operation as described in this manual. The further RF exposure
reduction can be achieved if the product can be kept as far as possible from the user body or set the
device to lower output power if such function is available.
Le produit est conforme aux limites d’exposition pour les appareils portables RF pour les Etats-Unis
et le Canada établies pour un environnement non contrôlé.
Le produit est sûr pour un fonctionnement tel que décrit dans ce manuel. La réduction aux exposi-
tions RF peut être augmentée si l’appareil peut être conservé aussi loin que possible du corps de
l’utilisateur ou que le dispositif est réglé sur la puissance de sortie la plus faible si une telle fonction
est disponible.
WLI-UC-G450 User Manual 72
Appendix
Europe - EU Declaration of Conformity:
This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The
following test methods have been applied in order to prove presumption of conformity with the
essential requirements of the R&TTE Directive 1999/5/EC.
• EN60950 : 2006+A11:2009
Safety of Information Technology Equipment
• EN62311 : 2008
Assessment of electronic and electrical equipment related to human exposure restrictions for elec-
tromagnetic elds (0 Hz – 300GHz)
• EN 300 328 V1.7.1: (2006-10)
Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems;
Data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modu-
lation techniques; Harmonized EN covering essential requirements under article 3.2 of the R&TTE
Directive
• EN 301 489-1 V1.8.1: (2008-04)
Electromagnetic compatibility and Radio Spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 1: Common technical requirements
• EN 301 489-17 V2.1.1 (2009-05)
Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility
(EMC) standard for radio equipment and services; Part 17: Specic conditions for 2,4 GHz wideband
transmission systems and 5 GHz high performance RLAN equipment
This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU mem-
ber states and EFTA countries, except in France and Italy where restrictive use applies.
In Italy the end-user should apply for a license at the national spectrum authorities in order to ob-
tain authorization to use the device for setting up outdoor radio links and/or for supplying public
access to telecommunications and/or network services.
This device may not be used for setting up outdoor radio links in France and in some areas the RF
output power may be limited to 10 mW EIRP in the frequency range of 2454 – 2483.5 MHz. For de-
tailed information the end-user should contact the national spectrum authority in France.
Appendix
WLI-UC-G450 User Manual 73
Česky [Czech]
Bualo Technology Inc. tímto prohlašuje, že tento AirStation WLI-UC-G450 je ve shodě se základními
požadavky a dalšími příslušnými ustanoveními směrnice 1999/5/ES.
Dansk [Danish]
Undertegnede Bualo Technology Inc. erklærer herved, at følgende udstyr AirStation WLI-UC-G450
overholder de væsentlige krav og øvrige relevante krav i direktiv 1999/5/EF.
Deutsch [German]
Hiermit erklärt Bualo Technology Inc. dass sich das Gerät AirStation WLI-UC-G450 in
Übereinstimmung mit den grundlegenden Anforderungen und den übrigen einschlägigen
Bestimmungen der Richtlinie 1999/5/EG bendet.
Eesti [Estonian]
Käesolevaga kinnitab Bualo Technology Inc. seadme AirStation WLI-UC-G450 vastavust direktiivi
1999/5/EÜ põhinõuetele ja nimetatud direktiivist tulenevatele teistele asjakohastele sätetele.
English
Hereby, Bualo Technology Inc. declares that this AirStation WLI-UC-G450 is in compliance with the
essential requirements and other relevant provisions of Directive 1999/5/EC.
Español [Spanish]
Por medio de la presente Bualo Technology Inc. declara que el AirStation WLI-UC-G450 cumple
con los requisitos esenciales y cualesquiera otras disposiciones aplicables o exigibles de la Directiva
1999/5/CE.
Ελληνική [Greek]
ΜΕ ΤΗΝ ΠΑΡΟΥΣΑ Buffalo Technology Inc. ΔΗΛΩΝΕΙ ΟΤΙ AirStation WLI-UC-G450 ΣΥΜΜΟΡΦΩΝΕΤΑΙ
ΠΡΟΣ ΤΙΣ ΟΥΣΙΩΔΕΙΣ ΑΠΑΙΤΗΣΕΙΣ ΚΑΙ ΤΙΣ ΛΟΙΠΕΣ ΣΧΕΤΙΚΕΣ ΔΙΑΤΑΞΕΙΣ ΤΗΣ ΟΔΗΓΙΑΣ 1999/5/ΕΚ.
Français [French]
Par la présente Buffalo Technology Inc. déclare que l’appareil AirStation WLI-UC-G450 est conforme
aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.
Italiano [Italian]
Con la presente Buffalo Technology Inc. dichiara che questo AirStation WLI-UC-G450 è conforme ai
requisiti essenziali ed alle altre disposizioni pertinenti stabilite dalla direttiva 1999/5/CE.
Latviski [Latvian]
Ar šo Buffalo Technology Inc. deklarē, ka AirStation WLI-UC-G450 atbilst Direktīvas 1999/5/EK
būtiskajām prasībām un citiem ar to saistītajiem noteikumiem.
WLI-UC-G450 User Manual 74
Appendix
Lietuvių [Lithuanian]
Šiuo Buffalo Technology Inc. deklaruoja, kad šis AirStation WLI-UC-G450 atitinka esminius
reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Nederlands [Dutch]
Hierbij verklaart Buffalo Technology Inc. dat het toestel AirStation WLI-UC-G450 in overeenstemming
is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EG.
Malti [Maltese]
Hawnhekk, Buffalo Technology Inc. , jiddikjara li dan AirStation WLI-UC-G450 jikkonforma mal-
ħtiġijiet essenzjali u ma provvedimenti oħrajn relevanti li hemm fid-Dirrettiva 1999/5/EC.
Magyar [Hungarian]
Alulírott, Buffalo Technology Inc. nyilatkozom, hogy a AirStation WLI-UC-G450 megfelel a vonatkozó
alapvetõ követelményeknek és az 1999/5/EC irányelv egyéb elõírásainak.
Polski [Polish]
Niniejszym, Buffalo Technology Inc. , deklaruję, że AirStation WLI-UC-G450 spełnia wymagania
zasadnicze oraz stosowne postanowienia zawarte Dyrektywie 1999/5/EC.
Português [Portuguese]
Buffalo Technology Inc. declara que este AirStation WLI-UC-G450 está conforme com os requisitos
essenciais e outras disposições da Directiva 1999/5/CE.
Slovensko [Slovenian]
Buffalo Technology Inc. izjavlja, da je ta AirStation WLI-UC-G450 v skladu z bistvenimi zahtevami in
ostalimi relevantnimi določili direktive 1999/5/ES.
Slovensky [Slovak]
Buffalo Technology Inc. týmto vyhlasuje, že AirStation WLI-UC-G450 spĺňa základné požiadavky a
všetky príslušné ustanovenia Smernice 1999/5/ES.
Suomi [Finnish]
Buffalo Technology Inc. vakuuttaa täten että AirStation WLI-UC-G450 tyyppinen laite on direktiivin
1999/5/EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen.
Svensk [Swedish]
Härmed intygar Buffalo Technology Inc. att denna AirStation WLI-UC-G450 står I överensstämmelse
med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av direktiv
1999/5/EG.
Appendix
WLI-UC-G450 User Manual 75
根據 NCC 低功率電波輻射性電機管制辦法：
第十二條：
經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能。
第十四條：
低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，
並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率
射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。
기종별 사 용 자 안 내 문
B 급 기기
( 가정용 정보통신기기 )
이 기기는 가정용 (B 급 ) 전자파적합기기로서 주
로 가정에서 사용하는 것을 목적으로 하며 , 모든
지역에서 사용할 수 있습니다 .
WLI-UC-G450 User Manual 76
Appendix
Environmental Information
• The equipment that you have purchased has required the extraction and use of natural resources
for its production.
• The equipment may contain hazardous substances that could impact health and the environment.
• In order to avoid the dissemination of those substances in our environment and to diminish the
pressure on the natural resources, we encourage you to use the appropriate take-back systems.
• The take-back systems will reuse or recycle most of the materials of your end life equipment in a
sound way.
• The crossed-out wheeled bin symbol invites you to use those systems.
• If you need more information on the collection, reuse and recycling systems, please contact your
local or regional waste administration.
Appendix
WLI-UC-G450 User Manual 77
Warranty Information
Bualo Technology (Bualo Inc.) products come with a two-year limited warranty from the date of
purchase. Bualo Technology (Bualo Inc.) warrants to the original purchaser the product; good
operating condition for the warranty period. This warranty does not include non-Bualo Technology
(Bualo Inc.) installed components. If the Bualo product malfunctions during the warranty period,
Bualo Technology/(Bualo Inc.) will, replace the unit, provided the unit has not been subjected
to misuse, abuse, or non-Bualo Technology/(Bualo Inc.) authorized alteration, modications or
repair.
All expressed and implied warranties for the Bualo Technology (Bualo Inc) product line including,
but not limited to, the warranties of merchantability and tness of a particular purpose are limited in
duration to the above period.
Under no circumstances shall Bualo Technology/(Bualo Inc.) be liable in any way to the user
for damages, including any lost prots, lost savings or other incidental or consequential damages
arising out of the use of, or inability to use the Bualo products.
In no event shall Bualo Technology/(Bualo Inc.) liability exceed the price paid for the product from
direct, indirect, special, incidental, or consequential damages resulting from the use of the product,
its accompanying software, or its documentation. Bualo Technology (Bualo Inc.) does not oer
refunds for any product.
@ 2003-2011 Bualo Technology (Bualo, Inc.)