Bahco Superior Users Manual
ProfCut to the manual 1ffe16ff-9fe6-4c23-a326-322cb9d29c35
2015-02-02
: Bahco Bahco-Superior-Users-Manual-480384 bahco-superior-users-manual-480384 bahco pdf
Open the PDF directly: View PDF 
.
Page Count: 8
Superior
Experience the Superior handsaw - a true
achievement in craftmanship! It will literally
cut through anything made by wood and
still be sharp after years of use. This is due
to the Hard Point unique XT-toothing, the
low friction coating, the extra thick blade
for added stability and precision as well as
the ergonomically designed handle.
ProfCut
Aimed at the professional user, the ProfCut
and ProfCut+ handsaws have the new super
sharp Hard Point GT-toothing. Choose the
low friction coated ProfCut+ handsaw for
easier sawing. There are also a wide variety
of ProfCut application handsaws available
for sawing in plywood, laminates, timber,
plastics, plaster and concrete.
PrizeCut
PrizeCut is a robust and affordable
handsaw with Hard Point UT-toothing for
cutting all types of wood. The single
component, solid handle is designed for
long lasting use.
A complete
range of
professional
handsaws
• Widest range on the market
• Differentiated price segments
• Large choice of application saws
• Comprehensive end-user communication
Ergonomically designed
Ergo handle
XT-toothing
symbol
Low Friction
coating
Tooth
protector
Low
Friction
symbol
XT-toothing
symbol
Hard
Point
symbol
Types of wood
to be cut
XT-toothing
The mix of tooth geometry and
grinding angles, together with
a perfect hardening process,
make our unique XT-toothing
the ultimate choice for efficient
and comfortable sawing.
Main feature in
four languages
Sleeve - back
EAN code Main feature in 14 languages
Blade information
Blade length
in inch and mm
Handle
Superior • Unique XT-toothing
• Low Friction coating
• Ergo Classification
• Thicker blade for stability and precision
Thicker blade
symbol
Medium toothing
information in
four languages
Medium
toothing symbol
Art. code
Teeth/points
per inch
Superior
COMPASS 12”
12¨ / 300 mm
Art. Code: 3150-12-XT9-HP
FINE 16”
16¨ / 400 mm
Art. Code: 2600-16-XT11-HP
LAMINATOR 20”
20¨ / 500 mm
Art. Code: SUP-20-LAM
COARSE 24”
24” / 600 mm
Art. Code: 2700-24-XT7-HP
COARSE 22”
22” / 550 mm
Art. Code: 2700-22-XT7-HP
MEDIUM 22”
22¨ / 550 mm
Art. Code: 2600-22-XT-HP
MEDIUM 19”
19¨ / 475 mm
Art. Code: 2600-19-XT-HP
TENON 14”
14¨ / 350 mm
Art. Code: 3180-14-XT11-HP
VENEER 14”
14¨ / 350 mm
Art. Code: 3240-14-XT11-HP
Laminate saw
Small saws
Toolbox saw
Saw for coarse cutting
Saw for medium cutting
Toolbox saw for fine cutting
Simply Superior ®
Sleeve - front
GT-toothing
Our NEW supersharp GT-toothing
is specifically developed for high
cutting performance. The 3-sided
ground tooth form ensures excellent
results in all types of wood.
GT-toothing
symbol
Tooth
protector
Types of wood
to be cut
Sleeve - front
Main feature in
four languages
ProfCut+
ProfCut
VENEER 12”
12¨ / 300 mm
Art. Code: PC-12-VEN
COMPASS 12”
12¨ / 300 mm
Art. Code: PC-12-COM
BASE ASSORTMENT
Toolbox saw
MEDIUM 22”
22¨ / 550 mm
Art. Code: PCP-22-GT7
MEDIUM 19”
19¨ / 475 mm
Art. Code: PCP-19-GT7
FINE 22”
22¨ / 550 mm
Art. Code: PCP-22-GT9
FINE 19”
19¨ / 475 mm
Art. Code: PCP-19-GT9
MEDIUM 22”
22¨ / 550 mm
Art. Code: PC-22-GT7
MEDIUM 19”
19¨ / 475 mm
Art. Code: PC-19-GT7
FINE 22”
22¨ / 550 mm
Art. Code: PC-22-GT9
FINE 19”
19¨ / 475 mm
Art. Code: PC-19-GT9
FINE 15”
15” / 400 mm
Art. Code: PC-15-TBX
TENON 12”
12¨ / 300 mm
Art. Code: PC-12-TEN
ProfCut • New super sharp GT-toothing
• Low Friction coated ProfCut+
• New comfortable two-component handle
• Unique special application saws
Sleeve - back
EAN code Main feature in 14 languages
For professional
results
Medium toothing
information in four
languages
Art. code
Small saws
Saw for medium cutting
Saw for fine cutting
Saw for medium cutting
Saw for fine cutting
Toolbox saw for fine cutting
Comfortable two-
component handle
ProfCut : Rust protection laquered
ProfCut+: Low Friction coated (orange coloured)
Blade
length
in inch
and mm
GT-
toothing
symbol
Hard
Point
symbol
Blade information Handle
SPECIAL APPLICATION SAWS
Concrete saws
Plaster saw
Timber saw
Precision saw
Laminate saw
General purpose saw
MEDIUM 24”
24¨ / 600 mm
Art. Code: PC-24-FILE-U7
MEDIUM 22”
22¨ / 550 mm
Art. Code: PC-22-FILE-U7
MEDIUM 19”
19¨ / 475 mm
Art. Code: PC-19-FILE-U7
MEDIUM 16”
16¨ / 400 mm
Art. Code: PC-16-FILE-U7
Light concrete saw
DOVETAIL 10”
10¨ / 250 mm
WOOD AND PLASTIC. DOVETAIL RIGHT.
Art. Code: PC-10-DTR
DOVETAIL 10”
10¨ / 250 mm
WOOD AND PLASTIC. DOVETAIL FLEX.
Art. Code: PC-10-DTF
DOVETAIL 10”
10¨ / 250 mm
WOOD AND PLASTIC. DOVETAIL LEFT.
Art. Code: PC-10-DTL
Dovetail saws
Medium
toothing
symbol
Teeth/points
per inch
Polystyrene, foam saw
Fileable saw for medium cutting
30”
30¨ / 750 mm
15 CARBIDE TIPS
Art. Code: 255-15/29
30”
30¨ / 750 mm
30 CARBIDE TIPS
Art. Code: 255
26”
26¨ / 650 mm
NON-CARBIDE
Art. Code: 256-26
Fileable saws
GENERAL PURPOSE 15”
15¨ / 380 mm
Art. Code: PC-15-GNP
PLASTER 24”
24¨ / 600 mm
Art. Code: PC-24-PLS
LAMINATOR 20”
20” / 500 mm
Art. Code: PC-20-LAM
PRECISION 20”
20” / 500 mm
Art. Code: PC-20-PRC
TIMBER 24”
24¨ / 600 mm
Art. Code: PC-24-TIM
DECOR 16”
16¨ / 400 mm
Art. Code: PC-16-DECO
UT-toothing
The universal toothing is strong and hard
wearing, suitable for both rip and cross cutting
in all types of wood.
One-component
solid handle
Tooth
protector
UT-
toothing
symbol
Hard Point
symbol
PrizeCut
Blade length in
inch and mm
Blade information Handle
Small saws
Rust protection
laquered
UNIVERSAL 22”
22¨ / 550 mm
Art. Code: NP-22-U7/8-HP
UNIVERSAL 19”
19¨ / 475 mm
Art. Code: NP-19-U7/8-HP
UNIVERSAL 16”
16¨ / 400 mm
Art. Code: NP-16-U7/8-HP
TENON 12”
12¨ / 300 mm
Art. Code: NP-12-TEN
VENEER 12”
12¨ / 300 mm
Art. Code: NP-12-VEN
COMPASS 12”
12¨ / 300 mm
Art. Code: NP-12-COM
PrizeCut • Universal toothing for all types of wood
• Hard Point for longer life
General purpose saw
FINE 14”
14¨ / 360 mm
Art. Code: 300-14-F15/16-HP
Medium
toothing
symbol
Value with an edge
Art. code Teeth/points
per inch
Concrete saws
25”
25¨ / 620 mm
17 CARBIDE TIPS
Art. Code: NP-CONC-17/34
25”
25¨ / 620 mm
34 CARBIDE TIPS
Art. Code: NP-CONC
Selection Table
There are a few things to consider when
selecting the right saw for the job. The following
steps and the table below will help you to
choose. Then complete the selection with other
saw features you prefer.
Contact us if you need more information!
Step 1. Select saw model: Superior, ProfCut or PrizeCut.
Step 2. Select saw according to column 1 – Type of saw/material.
Step 3. Select saw according to application – se column 5 and column 6 (Length).
- Precision work: Use fine cut saws with small teeth from 9/10 to 15/16 teeth/points per inch.
The length of the saw makes little difference.
- General work: Use medium cut saws with medium size teeth from 7/8 to 9/10 teeth/points per inch.
The length should be 18-22 inches for vigorous, thrusting strokes.
- Rough work: Use coarse cut saws with large teeth with 7/8 teeth/points per inch.
The length should be 22-26 inches for long, vigorous strokes.
Superior
GENERAL BLADE HANDLE
Type of Art. code EAN- Pack Application Length Toothing/TPI Low friction Thickness Type
saw/material code Qty in/mm coating of blade
COARSE
2700-24-XT7-HP 7311518191665 4 Timber, wet wood and tanalised 24/600 XT/7 Yes 1.03 mm Ergo, 2 component
COARSE
2700-22-XT7-HP 7311518191672 4 Timber, wet wood and tanalised 22/550 XT/7 Yes 1.03 mm Ergo, 2 component
MEDIUM
2600-22-XT-HP 7311518160777 4 Medium cutting 22/550 XT/9 Yes 1.03 mm Ergo, 2 component
MEDIUM
2600-19-XT-HP 7311518160760 4 Medium cutting 19/475 XT/9 Yes 1.03 mm Ergo, 2 component
Toolbox saw
FINE
2600-16-XT11-HP 7311518239527 4 Toolbox 16/400 XT/11 Yes 1.03 mm Ergo, 2 component
Laminate saw
LAMINATOR
SUP-20-LAM 7311518258351 4 Laminate and wooden floors 20/500 XT/11 Yes 0.93 mm Ergo, 2 component
Small saws
TENON
3180-14-XT11-HP 7311518181390 4 Tenon saw 14/360 XT/11 Yes 0.75 mm Ergo, 2 component
VENEER
3240-14-XT11-HP 7311518243005 4 Veneer saw 14/360 XT/11 Yes 0.75 mm Ergo, 2 component
COMPASS
3150-12-XT9-HP 7311518181406 4 Compass saw 12/300 XT/9 Yes 1.03 mm Ergo, 2 component
ProfCut
GENERAL BLADE HANDLE
Type of Art. code EAN- Pack Application Length Toothing/TPI Low friction Thickness Type
saw/material code Qty in/mm coating of blade
ProfCut+ base assortment
MEDIUM
PCP-22-GT7 7311518263331 4 Medium cutting 22/550 GT/7 Yes 0.83 mm 2 component
MEDIUM
PCP-19-GT7 7311518263317 4 Medium cutting 19/475 GT/7 Yes 0.83 mm 2 component
FINE
PCP-22-GT9 7311518263348 4 Fine cutting 22/550 GT/9 Yes 0.83 mm 2 component
FINE
PCP-19-GT9 7311518263324 4 Fine cutting 19/475 GT/9 Yes 0.83 mm 2 component
ProfCut base assortment
MEDIUM
PC-22-GT7 7311518263393 4 Medium cutting 22/550 GT/7 No 0.83 mm 2 component
MEDIUM
PC-19-GT7 7311518263362 4 Medium cutting 19/475 GT/7 No 0.83 mm 2 component
FINE
PC-22-GT9 7311518263409 4 Fine cutting 22/550 GT/9 No 0.83 mm 2 component
FINE
PC-19-GT9 7311518263379 4 Fine cutting 19/475 GT/9 No 0.83 mm 2 component
Toolbox saw
FINE
PC-15-TBX 7311518263423 4 Fine cutting/Toolbox 15/380 GT/11 No 0.75 mm 2 component
Small saws
TENON
PC-12-TEN 7311518263447 4 Tenon saw 12/300 UT/11 No 0.75 mm 2 component
VENEER
PC-12-VEN 7311518263430 4 Veneer saw 12/300 UT/11 No 0.75 mm 2 component
COMPASS
PC-12-COM 7311518263454 4 Compass saw 12/300 XT/9 No 1.03 mm 2 component
Fileable saws
MEDIUM
PC-16-FILE-U7 7311518263461 4 Medium cutting/Fileable 16/400 UT/7 Fileable No 0.83 mm 2 component
MEDIUM
PC-19-FILE-U7 7311518263478 4 Medium cutting/Fileable 19/475 UT/7 Fileable No 0.83 mm 2 component
MEDIUM
PC-22-FILE-U7 7311518263485 4 Medium cutting/Fileable 22/550 UT/7 Fileable No 0.83 mm 2 component
MEDIUM
PC-24-FILE-U7 7311518263492 4 Medium cutting/Fileable 24/600 UT/7 Fileable No 0.83 mm 2 component
Dove tail saws
DOVE TAIL
PC-10-DTR 7311518263546 10 Dovetail right 10/250 UT/13 No 0.50 mm Wood
DOVE TAIL
PC-10-DTL 7311518263553 10 Dovetail left 10/250 UT/13 No 0.50 mm Wood
DOVE TAIL
PC-10-DTF 7311518263560 10 Dovetail flex 10/250 FT/15 No 0.50 mm Wood
Special application saws
Laminate saw
LAMINATOR
PC-20-LAM 7311518258290 4 Laminate and wooden floors 20/500 XT/11 No 0.93 mm 2 component
Precision saw
PRECISION
PC-20-PRC 7311518264291 4 Mitre/Precision/Fine 20/500 UT/9 No 0.93 mm 2 component
Timber saw
TIMBER
PC-24-TIM 7311518263515 4 Coarse cutting/Fileable 24/600 FT/3.5 Fileable No 0.93 mm 2 component
Plaster saw
PLASTER
PC-24-PLS 7311518263508 4 Plaster 24/600 GT/7 No 0.93 mm 2 component
General purpose saw
GEN. PURPOSE
PC-15-GNP 7311518264307 4 General purpose 15/380 FT/15 No 0.75 mm 2 component
Polystyrene, foam saw
DECOR
PC-16-DECO 7311518264987 4 Polystyrene, foam saw 16/400 Special No 0.75 mm 2 component
Concrete saws255 7311518007843 1 Concrete/Carbide tip 30/750 30 Carbide tips No 1.6 mm 2 component
255-15/29 7311518007850 1 Concrete/Carbide tip 30/750 15 Carbide tips No 1.6 mm 2 component
Light Concrete saw
256-26 7311518000080 4 Light weight concrete 26/650 Non-Carbide No 1.15 mm 2 component
PrizeCut
GENERAL BLADE HANDLE
Type of Art. code EAN- Pack Application Length Toothing/TPI Low friction Thickness Type
saw/material code Qty in/mm coating of blade
UNIVERSAL
NP-22-U7/8-HP 7311518034399 10 Universal 22/550 UT/7 No 0.83 mm 1 component
UNIVERSAL
NP-19-U7/8-HP 7311518241452 10 Universal 19/475 UT/7 No 0.83 mm 1 component
UNIVERSAL
NP-16-U7/8-HP 7311518241773 4 Universal 16/400 UT/7 No 0.83 mm 1 component
Small saws
TENON
NP-12-TEN 7311518263959 10 Tenon saw 12/300 UT/13 No 0.75 mm 1 component
VENEER
NP-12-VEN 7311518264260 4 Veneer saw 12/300 UT/13 No 0.75 mm 1 component
COMPASS
NP-12-COM 7311518264277 4 Compass saw 12/300 UT/7 No 1.20 mm 1 component
General purpose saw
FINE
300-14-F15/16-HP 7311518005955 4 General purpose 14/360 FT/15 No 0.75 mm 1 component
Concrete saws
NP-CONC 7311518264918 4 Concrete/Carbide tip 25/620 34 Carbide tips No 2.00 mm Wood
NP-CONC-17/34 7311518264925 4 Concrete/Carbide tip 25/620 17 Carbide tips No 2.00 mm Wood
A new generation
of professional
handsaws
The unique saw supplier since 1886
www.bahco.com
