Baltech 1056400101A02A Inductive Reader User Manual ACCESS45 5 232 LEGP LB Operation Manual

Download:
Mirror Download [FCC.gov]
Document ID	911142
Application ID	yW/M2jR4gh2tJG8WCaBwNg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.78kB (122234 bits)
Date Submitted	2008-03-07 00:00:00
Date Available	2008-03-07 00:00:00
Creation Date	2008-02-27 18:35:30
Producing Software	OpenOffice.org 2.3
Document Lastmod	2008-03-07 10:35:03
Document Title	ACCESS45-5-232-LEGP-LB Operation Manual
Document Creator	Writer
Document Author:	juergen roesch

Operation Manual
0564A02A-003 /EQT Medusa M1415 RS422/EPA
REVISION 1.0, 2008-02-27
The EQT-Medusa -M1415-RS422/EPA is a RFID Read-/Write-Device (short: reader) which is
compatible to all Mifare cards. The reader also supports ISO14443A/B and ISO15693 and all
cards compliant to these standards. It provides a serial interface RS422 to output or exchange
data with a host computer (typically an Equitrac Page Counter Unit, a printer or a copy
machine) and a 13.56MHz inductive interface to supply power to and exchange data with the
Mifare/ISO compliant card (or other available form-factors such as tags, key-fobs). The host
computer can control a bi-colour LED and a beeper to interface with the user.
Mounting and Connection
The reader generates a magnetic field with the frequency of 13.56MHz which is influenced by
any electrically conductive material in close proximity to the device. When mounting the unit,
a distance to any such material of minimum 10 cm is required to ensure that there will be no
significant degradation of the performance in terms of read range and reliability. Mounting
the unit directly to metal would result in a severe reduction of read range down to zero
functionality. Care should be taken when testing the device after mounting at a problematic
environment: Read ranges and performance vary from card to card and very much from card
to tag or key-fob.
When mounting multiple readers, the distance between readers should be minimum 0.5 m in
order to avoid degradation of performance due to interference.
To connect the device to an Equitrac PageCounter, printer or copy machine, please make sure
the host system provides an 14-pin Mini-DIN socket intended for connection of the reader.
Operation
Whenever the device is connected to a proper power supply, it will switch on the internal
antenna and periodically scan for a card. Once a card has been detected, the card number is
read, the data converted and sent to the host system through the serial interface. To enable the
device to read cards, tags and key-fobs successfully, they should be placed centred above the
reader.
Technical Data
DC Electrical Characteristics
Symbol
Vdd
Idd
Idd1
Parameter
Supply Voltage
Supply current
Peak Supply
current
Condition
Inrush
Min Typ Max
4.75 5
5.5
400
450
Units
VDC
mA
mA
Additional requirements for the supply voltage: Vripple = 50mVpp max.
RF Characteristics
Operating frequency: 13.56 MHz
Data transmission modulation reader to card: AM
Data transmission modulation card to reader: AM/load modulation
Pinout RS422-Interface MDR 14-Pole connector plug and Signal
Descriptions
Pin
10
11
12
13
14
Name
GND
-TX RS422
+TX RS422
-RX RS422
+RX RS422
+5V Power
+5V Return
Type
Power
Output
Output
Input
Input
Power
Power
I/O
Description
Signal and Power Ground
RS422-data from reader
RS422-data from reader
Not connected
RS422-data to reader
RS422-data to reader
Not connected
Signal and Power Ground
Not connected
Power Ground
Not connected
Connected
Not connected
Not connected
Temperature
Operating temperature range: 0…45°C
Storage temperature range: -20…+60°C
Thermal shock: 30°C/min maximum dT/dt
Humidity
Operating: 20% to 80% relative humidity; non condensing
Non-operating: 10% to 90% relative humidity; non condensing
FCC:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Canada:
This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Modify Date                     : 2008:03:07 10:35:03+01:00
Create Date                     : 2008:02:27 18:35:30+01:00
Author                          : juergen roesch
Page Count                      : 2
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:0880de5e-e7c0-4faa-af78-8e1738069fa1
Producer                        : OpenOffice.org 2.3
Creator Tool                    : Writer
Metadata Date                   : 2008:03:05 14:58:27+01:00
Document ID                     : uuid:162814b4-909a-4b52-bfc5-3ab05ca9d40f
Format                          : application/pdf
Title                           : ACCESS45-5-232-LEGP-LB Operation Manual
Creator                         : juergen roesch

EXIF Metadata provided by EXIF.tools