Baltech 1056600101A03B Inductive Reader User Manual ACCESS45 5 232 LEGP LB Operation Manual

Download:
Mirror Download [FCC.gov]
Document ID	925384
Application ID	aPRHLP/y5vaWrc+d6LHQlA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	9.64kB (120465 bits)
Date Submitted	2008-04-09 00:00:00
Date Available	2008-04-09 00:00:00
Creation Date	2008-02-27 19:53:34
Producing Software	OpenOffice.org 2.3
Document Lastmod	2008-04-02 15:01:05
Document Title	ACCESS45-5-232-LEGP-LB Operation Manual
Document Creator	Writer
Document Author:	juergen roesch

Operation Manual
0566A03B-003 / EQT Medusa HID RS422/EPA
REVISION 1.0, 2008-02-26
The 0566A03B-003 is a RFID Read-/Write-Device (short: reader) which is compatible to all
HID cards. It provides a serial interface RS422 to output or exchange data with a host
computer (typically an Equitrac Page Counter Unit, a printer or a copy machine) and a
125kHz inductive interface to supply power to and exchange data with the HID compliant
card (or other available form-factors such as tags, key-fobs). The host computer can control a
bi-colour LED and a beeper to interface with the user.
Mounting and Connection
The reader generates a magnetic field with the frequency of 125kHz which is influenced by
any electrically conductive material in close proximity to the device. When mounting the unit,
a distance to any such material of minimum 10 cm is required to ensure that there will be no
significant degradation of the performance in terms of read range and reliability. Mounting
the unit directly to metal would result in a severe reduction of read range down to zero
functionality. Care should be taken when testing the device after mounting at a problematic
environment: Read ranges and performance vary from card to card and very much from card
to tag or key-fob.
When mounting multiple readers, the distance between readers should be minimum 0.5 m in
order to avoid degradation of performance due to interference.
To connect the device to an Equitrac PageCounter, printer or copy machine, please make sure
the host system provides an 14-pin Mini-DIN socket intended for connection of the reader.
Operation
Whenever the device is connected to a proper power supply, it will switch on the internal
antenna and periodically scan for a card. Once a card has been detected, the card number is
read, the data converted and sent to the host system through the serial interface. To enable the
device to read cards, tags and key-fobs successfully, they should be placed centred above the
reader.
Technical Data
DC Electrical Characteristics
Symbol
Vdd
Idd
Idd1
Parameter
Condition
Supply Voltage
Supply current
Peak Supply
Inrush
current
Min Typ Max
4.75 5
5.5
400
450
Units
VDC
mA
mA
Additional requirements for the supply voltage: Vripple = 50mVpp max.
RF Characteristics
Operating frequency: 125kHz
Data transmission modulation reader to card: AM
Data transmission modulation card to reader: AM
Pinout RS422-Interface MDR 14-Pole connector plug and Signal
Descriptions
Pin Name
GND
Type
Power
-TX RS422
+TX RS422
-RX RS422
+RX RS422
+5V Power
Output
Output
Input
Input
Power
10
11
12
13
14
+5V Return
Power
Input/Output
Description
Signal and Power
Ground
RS422-data from reader
RS422-data from reader
Not connected
RS422-data to reader
RS422-data to reader
Not connected
Signal and Power
Ground
Not connected
Power Ground
Not connected
Connected
Not connected
Not connected
Temperature
Operating temperature range: 0…35°C
Storage temperature range: -20…+60°C
Thermal shock: 30°C/min maximum dT/dt
Humidity
Operating: 20% to 80% relative humidity; non condensing
Non-operating: 10% to 90% relative humidity; non condensing
FCC:
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Canada:
This Class B digital apparatus complies with Canadian ICES-003.Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 2
Has XFA                         : No
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:d52f633a-65ee-4a89-9f13-7df8b7bfb088
Producer                        : OpenOffice.org 2.3
Create Date                     : 2008:02:27 19:53:34+01:00
Creator Tool                    : Writer
Modify Date                     : 2008:04:02 15:01:05+02:00
Metadata Date                   : 2008:04:02 15:01:05+02:00
Document ID                     : uuid:7770c4dc-7e45-4d45-91d2-a80b54ca1ba7
Format                          : application/pdf
Title                           : ACCESS45-5-232-LEGP-LB Operation Manual
Creator                         : juergen roesch
Author                          : juergen roesch

EXIF Metadata provided by EXIF.tools