User manual
This manual is a quick start guide for Roadie 2. Please read the
following instructions and conditions before using Roadie 2.
For a more comprehensive overview on how to operate Roadie
2 check our online helpdesk.
Product manual
facebook.com/RoadieTuner
Getting started with Roadie 2.
Join the Roadie community at:
twitter.com/RoadieTuner
MODEL NUMBER
RD200
www.roadietuner.com/support
Disclaimer:
This manual describes the version of Roadie 2 as of August 2017.
Although Band Industries has made every effort to ensure that the
information contained in it was correct at publish time, it does not
assume and hereby disclaim any liability to any party for any loss,
damage or disruption caused by errors or omissions, whether such
errors or omissions result from negligence, accident or any other
cause.
The information in this Product Manual is subject to change without
notice. Band Industries makes no representations or warranties with
respect to the content hereof and specifically disclaims any implied
warranties of merchantability or fitness for any particular purpose.
Band Industries reserves the right to revise this publication and to
make changes from time to time in the content hereof without
obligation of Band Industries to notify any person of such revision or
changes.
Copyright
This publication, including all photographs, illustrations and software,
is protected under international copyright laws, with all rights
reserved. Neither this Product Manual, nor any of the material
contained herein, may be reproduced without written consent of
Band Industries.
Trademark recognition
Band Industries, the Band Industries logo, Roadie 2, and Roadie
App are trademarks and/or registered trademarks of Band
Industries, Inc. in the U.S., E.U. and other countries.
EN
DE
ES
FR
JP
CN
Contents
3
3
4
5
8
10
10
12
13
14
14
14
16
16
A. Warranty
B. Inside this box
C. Getting started: basics
Creating a new instrument
Tuning with Roadie 2
Installing the optional mobile app
Re-stringing using Roadie 2
Power and recharging
Beyond the basics
D. Troubleshooting
Hard reset
E. Compliance
FCC radiation exposure statement
Safety instructions
18
Correct disposal of this product
2
EN
DE
ES
FR
JP
CN
A. Warranty
Band Industries one-year limited warranty
Band Industries warrants the included hardware
product and accessories against defects in
materials and workmanship for one year from the
date of original retail purchase. Band Industries
does not warrant against normal wear and tear,
nor damage caused by accident or abuse.
To obtain service, please email us at
support@bandindustries.com
B. Inside this box
EN
DE
ES
FR
JP
CN
A. Roadie 2
B. USB C
Charging Cable
3
C. Getting started: basics
EN
DE
ES
FR
JP
CN
R Button
Nav Wheel
Status LED
Screen
1
3
2
4
Peg
Connector
Front LED
5
6
4
Creating a new instrument
1. Turn Roadie 2 on by pressing the R button (1).
2. The screen (2) will power on and display
the Roadie logo, the status LED (3) will light up
blue and the main menu will be shown.
3. Select “Add Instrument” from the list by rotating
the nav wheel (4) until it is highlighted and then
EN
DE
ES
FR
JP
CN
5
Add Instrument
Return
pressing the R button (1).
4. You will now select the type of instrument you
would like to create from the list of options.
EN
DE
ES
FR
JP
CN
6
Acoustic Guitar
Electric Guitar
Ukelele
5. Select the number of strings your new
instrument has and select “OK”.
6. Name the instrument and select “OK”. This will
end the new instrument creation step and go
back to the main menu.
7
EN
DE
ES
FR
JP
CN
Number of Strings
6 Strings
7 Strings
Give it a Name
My Device_
< b c d e f >
E2
A2
D3
Tuning with Roadie 2
1. Select an instrument from the list.
2. You are now ready to tune. Place Roadie 2’s
peg connector (5) on your instrument’s tuning
peg starting with the lowest note first.
My Instrument #1
My Instrument #2
My Instrument #3
8
EN
DE
ES
FR
JP
CN
3. Pluck the string. Roadie 2 will rotate the
machine head and tune the string in seconds.
You know the string is in tune when Roadie 2
beeps, flashes the status LED (3) green and
vibrates.
4. Turn off Roadie 2 by long pressing on the R
button (1) for 3 seconds.
EN
DE
ES
FR
JP
CN
9
Installing the optional mobile app
The Roadie Tuner app allows you to set up
custom tunings and customize Roadie 2 to your
personal needs.
The app is compatible with the following devices:
iPhone (4S & above), iPad (3rd gen. & above),
iPad Mini, iPod touch (5th gen. & above) and any
Android device running Android version 4.3 or
newer and equipped with Bluetooth 4.0.
NOTE – The app connects automatically to
your phone’s Bluetooth without needing to
manually pair in the settings menu.
Re-stringing using Roadie 2
EN
DE
ES
FR
JP
CN
10
Add Instrument
Return
To use Roadie 2 as a string winder/unwinder, just
select Wind / Unwind in the main menu. Once in
this mode, turn the nav wheel (4) in the direction
you would like to rotate the peg connector (5).
Once restringing is complete, select “Return”.
11
New Instrument
Wind / Unwind
Settings
EN
DE
ES
FR
JP
CN
Wind / Unwind
Power and recharging
USB C
Charging Port
Reset
Pin Hole
Charging
LED
7
98
12
Wind / Unwind
EN
DE
ES
FR
JP
CN
• Roadie 2 operates on a 3.7V 600mAh Lithium
Polymer battery.
• When the battery is low you should charge it
through the USB C charging port (8).
• When charging, the charging LED (7) turns red.
• When the charging LED (7) turns green,
it means that the battery is fully charged. In
that case you should unplug the USB C cable.
Note: To ensure maximum battery life and
protection, Roadie 2 will not work when charging.
Beyond the basics
In our online help desk
www.roadietuner.com/support
you will find more information about the
following:
• Tuning with a capo on.
• Changing reference A4 pitch.
• Creating custom tunings.
• Many other topics.
EN
DE
ES
FR
JP
CN
13
D. Troubleshooting
Hard reset
If Roadie 2 becomes unresponsive, a hard reset is
required. Simply insert a pin into the reset pin hole (9)
and press the button within to reset Roadie 2.
E. Compliance
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference
received, including interference that may cause
undesired operation.
9
EN
DE
ES
FR
JP
CN
14
Note: This equipment has been tested and
found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio communica-
tions. However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver is
connected.
EN
DE
ES
FR
JP
CN
15
• Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate this equipment.
EN
DE
ES
FR
JP
CN
16
FCC radiation exposure statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
Safety instructions
Please read these instructions, keep them and follow
them.
• Do not tamper with your tuner.
• Do not attempt to disassemble or open your tuner.
Substances contained in this product and/or its
battery may damage the environment and/or human
health if handled and disposed of improperly.
• Do not expose your tuner to extremely high or low
temperatures.
• Do not leave your tuner in direct sunlight for an
extended period of time.
• Do not leave your tuner near open flames.
• Do not dispose of your tuner in a fire. The battery
could explode.
• Do not use abrasive cleaners to clean your tuner.
• Do not place your tuner in a dishwasher, washing
machine or dryer.
• Regardless of what reasons cause unit damage,
please ask for the maintenance personnel to repair it.
Warning
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
This device complies with Industry Canada’s
licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
17
EN
DE
ES
FR
JP
CN
FCC radiation exposure statement
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.
Safety instructions
Please read these instructions, keep them and follow
them.
• Do not tamper with your tuner.
• Do not attempt to disassemble or open your tuner.
Substances contained in this product and/or its
battery may damage the environment and/or human
health if handled and disposed of improperly.
• Do not expose your tuner to extremely high or low
temperatures.
• Do not leave your tuner in direct sunlight for an
extended period of time.
• Do not leave your tuner near open flames.
• Do not dispose of your tuner in a fire. The battery
could explode.
• Do not use abrasive cleaners to clean your tuner.
• Do not place your tuner in a dishwasher, washing
machine or dryer.
• Regardless of what reasons cause unit damage,
please ask for the maintenance personnel to repair it.
Warning
The battery shall not be exposed to excessive heat
such as sunshine, fire or the like.
Caution
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
This device complies with Industry Canada’s
licence-exempt RSSs. Operation is subject to the
following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including
interference that may cause undesired operation of
the device.
Correct disposal of this product. This marking
indicates that this product should not be disposed
with other household wastes throughout the EU.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the product
was purchased. They can take this product for
environmental safe recycling.
Operating temperature 32-104oF (0-40oC).
Visit www.roadietuner.com/tutorial for support
and FAQs. We look forward to hear from you and
will get back to you as soon as possible.
© Copyright 2017 Band Industries, Inc. All rights reserved.
Designed & developed by Band Industries.
Made in China
www.roadietuner.com
18
EN
DE
ES
FR
JP
CN