BandRich PR30 PR30 series HSPA+ WLAN Pocket Router User Manual

BandRich Inc. PR30 series HSPA+ WLAN Pocket Router Users Manual

Users Manual

User Manual BandLuxe PR-30 Series HSPA+ WLAN Router P/N: <64006300011>
1 Table of Contents Introduction .............................................................................. 3 Features ................................................................................................ 3 Getting Started ......................................................................... 4 Package Contents ................................................................................. 4 Hardware Overview ............................................................................... 5 Installation ............................................................................................. 6 USB Connectivity .................................................................................. 9 Basic Functions ................................................................................... 10 Powering On and Off ..................................................................10 Main Screen ...............................................................................10 Status Indicators ......................................................................... 11 Viewing Device Information ........................................................ 11 Enabling WLAN ..........................................................................14 Enabling WPS ............................................................................14 Notifications ................................................................................14 Battery information .............................................................................. 15 PR-30 Series Management .................................................... 17 Accessing the Device .......................................................................... 17 Wizard Setup....................................................................................... 18 Advanced ............................................................................................ 20 Info .............................................................................................20 HSPA Config ...............................................................................21 Network ......................................................................................23 WLAN .........................................................................................24 DHCP .........................................................................................26 PIN Management .......................................................................28 SD Card ......................................................................................29 Password ....................................................................................29 Upgrade ......................................................................................30 Backup & Restore ......................................................................31 File Sharing ......................................................................................... 32 Appendices ............................................................................. 34 Appendix A: FAQ ................................................................................. 34 Appendix B: Specifications .................................................................. 34 Appendix C: Important Safety Information .......................................... 37
2 Europe – EU Declaration of Conformity ..................................... 37 GCF ........................................................................................... 38 RoHS/WEEE .............................................................................. 39 Glossary ............................................................................................. 39
Introduction 3 Introduction Thank you for your purchase of the PR-30 Series HSPA+ WLAN Pocket Router. This device is designed to access the Internet via 3.75G technology and share the Internet through a WLAN network. You can also share files with your friends with an optional microSD card. The PR-30 is portable and easy to use. Reading the user manual will help you make the most of your product. Features • HSPA+ WLAN Router • WPS Support • Supports up to 5 simultaneous wireless users • Supports optional microSD card (up to 16 GB) • Uplink speeds up to 5.7 Mbps • Downlink speeds up to 21 Mbps • Supports WLAN 802.11 b/g • Operating Frequency Bands o UMTS/HSPA+: PR30 – 850/1900 o GSM: 850/1900 MHz • External 3G Antenna Port Ready
Getting Started 4 Getting Started This chapter will provide a hardware overview of the PR-30 Series HSPA+ WLAN Pocket Router and step by step instructions on installing the device. Package Contents PR-30 Series HSPA+ WLAN Router Power Adapter User Manual CD Battery USB Cable
Getting Started 5 Hardware Overview 1 ON/OFF switch Powers on/off the router. See “Powering On and Off”, p.10. 2 Scrolls through device information on the LCD screen. See “Viewing Device Information”, p.11.3 Activates/deactivates WPS. See ”Enabling WPS”, p.14. Enables/Disables WLAN. See “Enabling WLAN”, p. 14. 4 USB port Connect the USB cable to the power adapter or a PC. See “USB Connectivity”, p.9. 5 Back cover notch Use to open back cover. 6 3G external antenna port You can attach a 3G external antenna (optional) for stronger signal strength. Additional Button Functions:
Getting Started 6 The screen automatically dims after a period of inactivity. To illuminate the screen again, press the or . Hard Reset To reset the device to factory default, press and hold both the and for at least 10 seconds. Installation 1. Remove the back cover of the device. 2. Insert the SIM card into the slot. Ensure the SIM card orientation matches the SIM card slot.
Getting Started 7 3. Insert the microSD card (optional) into the slot with the metal contacts facing down and towards the slot. NOTE: The optional microSD card allows for file sharing between PCs on the same network when the PR-30 is connected via the USB cable/WLAN to the client . For more details, see “File Sharing”, p. 32. 4. Insert the battery. Ensure the battery contacts are properly oriented.
Getting Started 8 5. Replace the back cover of the device. 6. Connect the power adapter to the router. Plug the power adapter into a wall outlet to charge the battery. ; Warning: To prevent the battery from overheating, do not charge the device for long periods of time while using. NOTE: When the USB cable is connected to a PC, the cable provides 3.5G connectivity. The USB port may not provide sufficient charge to replenish battery power. To charge the battery, use the power adapter to connect the device to a wall outlet.
Getting Started 9 7. Link the router to your PC. • To link the router to your PC via a wireless connection, in Microsoft Windows, go to Control Panel > Network Connections. Right click on the Wireless Network Connection and choose View Available Wireless Networks. Select the SSID and enter the password (see the network information card in the box) and click Connect. • To link the router to your PC via a USB connection, connect the USB cable to the device and PC. Microsoft Windows automatically installs RNDIS drivers and establishes a local area connection, as indicated by the Local Area Connection icon on your PC. To use the web-based interface to configure and manage the wireless settings, see “PR-30 Series Management”, p. 17. USB Connectivity If the USB cable is connected between the device and a PC, the device establishes a local area connection, indicated by the Local Area Connection icon on the client PC, and a connection to the Internet via the user's mobile network connection, such as HSPA. If the USB cable is not used, the device may function as a wireless router and/or an Internet access point. As a wireless router, the PR-30 is capable of supporting up to 5 simultaneous wireless connections. In addition, the device allows users to share a single Internet connection.
Getting Started 10 If a microSD card is installed, the card may be used as a common storage space among the connected PCs. The PR-30 supports microSD cards up to 16GB. For more details, see “File Sharing”, p. 32. USB No USB Internet Access Yes Yes Wireless connections No 5 simultaneousFile sharing Yes Yes Basic Functions Powering On and Off To power the PR-30 on, slide the power switch located on the side of the chassis to the ON position. When the PR-30 is powered on, the screen displays a series of power-on animation. Main Screen The Main Screen is the default display screen and provides a quick glance at the status of the PR-30. Signal Strength Type of Radio Access Technology WLAN On/Off Radio Access Roaming On/Off
Getting Started 11 Battery Level Subscriber's Network Operator Status Indicators The top of the screen may display the following icons, depending on the status of the device. Signal Strength Level 0 Level 1 Level 2 Level 3 Level 4 Level 5 Radio Access Network GSM/GPRS EDGE UMTS HSPA/HSPA+ WLAN On Off Roaming On Off Battery Level 0 Level 1 Level 2 Level 3 Full Charging The Signal Strength icon indicates the relative strength of the radio signal from the nearest base station. The Radio Access Network icon indicates the subscriber’s network mobile technology. It may vary from user to user and from region to region. The WLAN icon indicates whether the WLAN feature is enabled or disabled. The Roaming icon indicates whether it is a roaming status or not. The Battery icon indicates the current battery level and whether the battery is charging or not charging. Viewing Device Information From the Main Screen, the user can press the to view the device status in more detail.
Getting Started 12 Flow Diagram: As indicated by the flow diagram, pressing the cycles through each screen. For example, starting from the Main Screen, if the user presses the twice, the WLAN Status screen is displayed on the screen. The Call Status screen displays the radio access technology of current data call and the status of the call. UMTS Disconnected
Getting Started 13 The WLAN Status screen displays detailed information on the PR-30 WLAN Router’s network. The top line displays the number of clients, in parenthesis, currently connected to the network. The PR-30 WLAN Routers can support up to a maximum of 5 simultaneous users on the network. The bottom line displays the SSID of the network. By default, the SSID is "BR + last 6 digits of the router's MAC address". To change the SSID, see "WLAN”, p.24. The System Info screen displays the firmware version of 3G module and router. The module firmware version is on the top line. The router firmware version is on the bottom line. To update the firmware, see “Upgrade”, p. 30. The WPS Help screen provides hints on how to activate the WPS Feature on the PR-30 WLAN Router. 1.5.01.01.12 8.09-010 (4)-SSID: BR1E548B
Getting Started 14 Enabling WLAN The toggles WLAN functionality on the device. To disable WLAN, short press the . To enable WLAN, short press the again. Enabling WPS WPS is a standard designed to easily setup and automatically configure secure WLAN networks between two WPS supported devices. If the client PC supports WPS, the WPS feature can be a user-friendly and simple process to get your WLAN network up and running. 1. Enable WLAN. 2. Press and hold the for at least 5 seconds. WPS: Connecting Device. is displayed. 3. Confirm the WPS option on the client PC trying to connect to the PR-30. WPS connecting device followed by New device connected is displayed. If you do not confirm the WPS connection within 120 seconds, No Device found is displayed and you must begin the process again. When WPS is enabled, the screen automatically reverts to the WLAN Status screen after a period of inactivity. Notifications If the firmware on the PR-30 is being updated via the Web interface, the screen informs the user of the process. FW updating…
Getting Started 15 If the user has enabled the PIN security protection on the SIM card, the screen directs the user to access Advanced > PIN Management via the web interface before proceeding to use the Internet connectivity features of the PR-30. Battery information The PR-30 is designed with power saving features to maximize battery life. The device enters boot mode when the battery is nearly depleted. Power State Wireless Feature System Nominal > Battery Level 0 3G connectivity available Normal screen activity WLAN available Boot mode < Battery Level 0 3G connectivity available Screen displays "Empty Battery" with LCD always on. When charging again, it returns to normal screen activity. WLAN available . Note: The safe temperature range for discharging and charging the battery is as follows: • Charging temperature: 0~40 degrees Celsius, maximum 45 degrees Celsius; once temperature exceeds 45 degrees the device will stop charging. PIN enabled act via Web.
Getting Started 16 ; Warning: When using in normal temperature environments, high battery power consumption may cause the battery temperature to exceed 45 degrees and thus stop charging if connected to a wall outlet. It is not recommended to charge and use the device at the same time. Discharging (operating) temperature: 20~60 degrees Celsius, maximum 75 degrees Celsius; once temperature exceeds 70 degrees the device will power off.
PR-30 Series Management 17 PR-30 Series Management Accessing the Device The PR-30 WLAN Router uses the web-based interface for managing and configuring wireless network settings. To access the interface, open a browser such as Internet Explorer and enter the router’s default IP in the browser’s address bar. Use the appropriate IP depending on the connection method. Connection method Default IP USB 192.168.21.1 WLAN 192.168.100.1 When the login window appears, enter the default username, root, and default password, 1234.
PR-30 Series Management 18 Wizard Setup Users can use the Wizard Setup to select language options and quickly configure WLAN network settings. To set the preferred web interface display language, select from the drop-down menu or the country flags displayed. To continue setup, click Next.
PR-30 Series Management 19 The WLAN tab allows you to quickly configure your WLAN network. . Note: You may be required to reconnect to the router if you change these settings from the factory default. SSID Network name of your WLAN network. It is case sensitive and can not exceed 14 characters. Default name is printed on the network information card. Encryption Type Method of encryption used when transferring data through the airwaves from the router to the client PC or vice versa. The PR-30 WLAN Router supports 3 encryption types - WEP, WPA, and WPA+WPA2. WPA is a WLAN standard that was designed to improve the security features of WEP. WPA2 is a more advanced, more secure version of WPA. Passphrase (WEP only) Sequence of words or text used to automatically generate a WEP Key. Enter a value between 8-63 characters. WEP Key 1-4 (WEP only) Key required to decipher the data encryption method. At least one key must be entered. Use a pre-existing passphrase by selecting Generate 40bit Key or Generate 128bit Key or manually
PR-30 Series Management 20 enter a WEP Key (letters from A-F and numbers 0-9). 40-bit WEP Keys require 10 hexadecimal digits and 128-bit WEP Keys require 26 hexadecimal digits. WPA Pre-Shared Key (WPA and WPA+WPA2) Key required to decipher the data encryption method. Enter a value between 8-63 characters. This field must not be left blank. To complete setup, click Finish. Advanced The Advanced Tab gives the user more flexibility and control for managing the PR-30 WLAN Router. Info This tab displays a summary on the current status of the device.
PR-30 Series Management 21 System Status Displays the current state of the battery. Local Network Displays the router's current IP and DHCP IP range. To modify this entry, see "Network”, p. 23. Register Network Displays information on the user’s mobile subscription service. Internet Connection Displays information on the current Internet connection (if connected). To modify this entry, see "HSPA Config”, p. 21. WLAN Network Displays information on the WLAN. To modify this entry, see "WLAN”, p. 24. Firmware Information Displays version numbers for the firmware. To update the firmware, see “Upgrade”, p. 30. To refresh these entries, reload your browser page. HSPA Config This tab allows you to change device settings related to the packet data network for mobile technologies.
PR-30 Series Management 22 Authentication Type The type of authentication used to connect to the mobile data network. Contact your network mobile operator for details. Roaming A feature of wireless telecommunication systems which allows the mobile subscriber to use network services outside his/her home mobile network, i.e. from one network provider to another. . Note: Rates for roaming can be very high. Contact your mobile network operator for rates and more information. Redial Policy Select from the drop-down menu how often the device connects to the Internet. Connect on Demand connects to the Internet at user's request. The connection automatically disconnects after the idle time expires and reconnects when uplink data is to be sent. Keep Alive maintains an active Internet connection. If the connection is interrupted, the router attempts to reconnect. Default option is Keep Alive. Maximum Idle Time Select a maximum idle time (in minutes) during which the Internet connection is maintained during inactivity. Not applicable on Keep Alive connections. Default value is 3 mins. Auto APN The APN (Access Point Name) is provided by your mobile
PR-30 Series Management 23 network operator. You can choose to set the APN automatically or manually. In most cases, it is recommended to check this option. User can press Update APN to get the latest APN data from server. To set the APN manually, select your mobile network operator from the Profile drop down box. The PR-30 automatically detects the operator(s) in your area. Contact your operator for the APN, Username and Password. Preference Allows you to change the sequential order of the mobile technology in which the device attempts to connect. Select Network Allows you to select Network automatically or manually. If you use Manual, you can choose one from list after pressing Scan Network. To preserve the changes you have made, click Save Changes. To apply the saved changes, click Apply Changes. To abort the changes, click Clear Changes. Network This tab allows you to change the local area network settings of the device. For wireless settings, see "WLAN”, p. 24.
PR-30 Series Management 24 Configuration The Router’s IP address and subnet mask which is seen in your local network. The default IP address via USB is 192.168.21.1, default IP address via WLAN is 192.168.100.1 and the default Subnet is 255.255.255.0. The Default Gateway is optional. Basic Firewall Select to enable or disable the router's built-in firewall feature. To preserve the changes you have made, click Save Changes. To apply the saved changes, click Apply Changes. To abort the changes, click Clear Changes. WLAN This tab allows the user to change the router’s wireless settings. Basic Configuration Operation Mode Select the device's WLAN function mode. Auto-off disables WLAN functions if no clients are connected after the Idle Time expires (enter Doze mode). Manual-off maintains an active WLAN
PR-30 Series Management 25 network regardless of the number of clients. The takes precedence over this feature to enable or to disable WLAN. Default value is Auto-Off. Doze mode: Main screen will display “sleep zzz” and press or to wake it up then press to enable WLAN. Maximum Idle Time Select from the drop-down menu the maximum idle time (in minutes) the WLAN network is active in search of clients. Not applicable on Manual-off connections. Default value is 10 mins. Radio Select to enable or disable the WLAN antenna. By selecting the Off option, you disable WLAN functions. Select On to re-enable. If you have selected the Off option when connected via WLAN, use the USB cable to regain access to the web interface. This option does not affect the Internet connection. Channel The radio channel number. The permissible channels depend on the regulatory domain (e.g. in the USA, it is 1 to 11). Select Auto to automatically use a permissible channel. SSID Network name of your WLAN network. It is case sensitive and can not exceed 14 characters. Default name is printed on the network information card. SSID Broadcast Option to broadcast your WLAN network name. For security purposes, you may choose to hide your network’s SSID by selecting Off. This prevents other PCs scanning for the presence of wireless networks to detect your network name. WLAN Security Setting Encryption Type Method of encryption used when transferring data through the airwaves from the router to the client PC or vice versa. The PR-30 WLAN Router supports 3 encryption types - WEP, WPA, and WPA+WPA2. The router supports two WEP (Wired Equivalent Privacy) standards: 64-bit (40-bit Key) and 104-bit (128-bit Key). WPA is a WLAN standard that was designed to improve the security features of WEP. WPA2 is a more advanced, more secure version of WPA.
PR-30 Series Management 26 Passphrase (WEP only) Sequence of words or text used to automatically generate WEP Key. Enter a value between 8-63 characters. WEP Key 1-4 (WEP only) Key required to decipher the data encryption method. At least one key must be entered. Use a pre-existing passphrase by selecting Generate 40bit Key or Generate 128bit Key or manually enter a WEP Key (letters from A-F and numbers 0-9). 40-bit WEP Keys require 10 hexadecimal digits and 128-bit WEP Keys require 26 hexadecimal digits. WPA Pre-Shared Key (WPA and WPA+WPA2) Key required to decipher the data encryption method. Enter a value between 8-63 characters. This field must not be left blank. . Note: Modifying and saving these settings interrupts your current connection and requires you to reconnect to the router. To preserve the changes you have made, click Save Changes. To apply the saved changes, click Apply Changes. To abort the changes, click Clear Changes. DHCP This tab allows the user to change the Dynamic Host Control Protocol (DHCP) settings on the router.
PR-30 Series Management 27 LAN DHCP DHCP Option enables the router as a DCHP server. A DHCP Server automatically assigns an IP address to the computers on the LAN/private network. Start Enter the starting IP address for the DHCP server’s IP assignment range. Limit Enter the total number of IP addresses which are assigned by the DHCP server. Lease Time (in minutes) The IP address lease time period. Enter the lease time in minutes. Active DHCP Leases Displays information on any clients connected to the network. To preserve the changes you have made, click Save Changes. To apply the saved changes, click Apply Changes. To abort the changes, click Clear Changes.
PR-30 Series Management 28 PIN Management This tab allows the user to manage U/SIM card PIN settings. PIN Verification SIM Status If you have enabled the PIN security protection on the SIM card, this entry displays PIN Enabled. Conversely, if you do not have PIN security enabled on your SIM card, this entry displays PIN Disabled. PIN Code If your SIM card PIN security protection is enabled, you must enter the PIN code for verification. Enter the code in the PIN Code field, and click Verify. PIN Management You can enable or disable the PIN security protection on your SIM card. Select Enabled or Disabled. If you change the status of the PIN protection your SIM card, you must enter the PIN code. PIN Modification You can change the PIN code on the SIM card. Enter your original PIN
PR-30 Series Management 29 code in the Old PIN Code field, enter the new PIN code in the New PIN Code field and the New PIN Confirm field, and click Change. SD Card This tab allows the user to change settings on the PR-30 for the microSD card. Network Sharing Select to Enable or Disable file sharing on the microSD card when the device is in router mode. To preserve the changes you have made, click Save Changes. To abort the changes, click Clear Changes. Password This tab allows the user to change the web interface login password.
PR-30 Series Management 30 Enter the new password in New Password and in Confirm Password. The password in both fields must match in order to successfully change the password. To preserve the changes you have made, click Save Changes. To abort the changes, click Clear Changes. Upgrade This tab allows the user to upgrade the firmware of the router or 3G module.
PR-30 Series Management 31 Check Do not save current configuration if you do not want to save the current configuration before upgrading the firmware. To upgrade the device's firmware version, click Browse to locate the new firmware version. Click Upgrade to start the upgrade process. ; Warning: Firmware upgrades may take a few minutes; do not turn off the power or reset the device during upgrade. Do so may result the device inoperable. To preserve the changes you have made, click Save Changes. To abort the changes, click Clear Changes. Backup & Restore This tab allows the user to manage the device’s configuration settings.
PR-30 Series Management 32 Backup Configuration Use this option to back up the router's current configuration settings to the PC. Enter a file name for configuration file and click Backup. Restore Configuration Use this option to restore the router’s configuration settings from a backup file. Click Browse to locate the configuration file and click Restore. Reset Function Use this option to reset the device to factory default from web page directly. File Sharing If a microSD card is installed, the card functions as a common storage space which is shared between the PCs connected to the PR-30's WLAN network. 1. Enable WLAN on the device. 2. Connect to the device's WLAN network on the client PC. 3. Open My Computer and type \\192.168.100.1. A folder
PR-30 Series Management 33 "PR_SD_Shared" is displayed. 4. Copy files you wish to share with the network into the folder, or copy files others have shared with you from the folder.
Appendices 34 Appendices Appendix A: FAQ Q: What is the default “Username” and “Password” for the router? A: User name: root Password: 1234 Q: How do I enter the web interface? A: 1. Open Internet Explorer or any Web browser. 2. Input “http://192.168.21.1” (via USB) in the address bar. 3. Input username and password. Q: How do I use WPS to setup a connection? A: 1. Press and hold the for at least 5 sec. 2. Accept the WPS option on PC requesting connection. Q: How do I configure settings for the router? A: 1. Use the Wizard Setup. 2. Modify the settings under the Advanced tabs. Q: Why can’t I connect to the Internet via built-in 3G module? A: 1. Check if the SIM/USIM is inserted properly. 2. Check if the correct network operator name and network technology is displayed on the LCD. 3. Check the SIM/USIM status under Advanced > Pin Management. 4. Check if the APN is correct under Advanced > HSPA Config 5. Check the Internet on GUI if the Connection is “Keep Alive” or not. Appendix B: Specifications Note: Specifications are subject to change without notice. Physical WLAN 802.11 b/g with 1x1 antenna design (no diversity). Coverage : 10m Cellular modem Embedded, GPRS/EDGE/WCDMA/HSPA/HSPA+ Dimension (LxWxH, mm) 105 x 66 x 14.8
Appendices 35 Weight (g) 135g Interface USB interface for PC connection Connect via RNDIS / CDC-ECM drivers LCD Display 1" Power Switch Yes Power on/ off: Yes Short press, trigger LCD display while in sleep mode Short press, turn on/off WLAN while LCD is on Long press (>5s), start WPS while LCD is on Built-in Battery 2,200 mAH Power supply plug Yes Charging via USB (Micro-USB) SIM slot Yes, hidden under battery MicroSD slot Yes, support up to 16 GB, hidden under battery.Connectivity and Data Speed GSM Band 850/1900 MHz UMTS/HSPA+ Band PR30: 850/1900 MHz HSPA+ Data Rate Downlink: up to 21Mbps, Uplink: up to 5.7Mbps EDGE/GPRS class B, multislot class 12 WLAN 802.11b/g Antenna WLAN Antenna Embedded Cellular Embedded Antenna Yes Receive Diversity Antenna embedded antenna, support for 2100MHz Cellular External Antenna Port Yes Protocol UMTS/HSPA connection Connection On Demand, Connection when available, Auto APN matching with USIM Security Multiple VPN pass-through (IPSec, PPTP, L2TP), Internet access restriction, Firewall, DoS Prevention, Event Logging NAT-NAPT Port forwarding, Port triggering,Multicast Pass-Through, QoS DNS DNS Agent ALG Support Yahoo messenger, AOL messenger, MSN messenger, ICQ, RealAudio, NetMeeting, Telnet, FTP, Microsoft Traceroute, Quake, IRC, Microsoft PPTP Client Other Features IPv4, TCP, UDP, ICMPv4, ARP, DHCP Server/Client, HTTPs, NTP
Appendices 36 Browser-based Administration GUI Web-based Setup Wizard in GUI. Browser supported: IE, Firefox, Safari Browser-based Administration GUI Language Support English Wireless LAN 802.11b data rate 1/2/5.5/11 Mbps, Auto or Fixed Rate 802.11g data rate 1/2/5.5/11/6/9/12/18/24/36/48/54 Mbps, Auto or Fixed Rate Security WPA2/WPA/AES/TKIP, WPA/WPA2 PSK mode, None/64/128 bits WEP Encryption, MAC filter, open system and shared key authentication, SSID Broadcast Disable WPS Yes Other Features Support up to 5 simultaneous wireless users Accessories AC adapter with Micro-USB head Supported, Input - 100~240V 50~60Hz, output – 5V, 2A Battery High capacity re-chargeable Li-ion battery, DC 3.7V, 2200mAH Environment Operation Temperature 0oC to 40oC Storage Temperature -20oC to 60oC Operating Humidity 10% to 80% Non-Condensing Storage Humidity 5% to 90% Non-Condensing Certification & Conformance CE GCF RoHS/WEEE
Appendices 37 Appendix C: Important Safety Information Europe – EU Declaration of Conformity European Union Notice Products with CE marking comply with the R&TTE Directive (99/5/EC), the EMC Directive (2004/108/EC), and the Low Voltage Directive (2006/95/EC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (in parentheses are the equivalent international standards). EN 60950-1 (IEC 60950-1) Safety of Information Technology Equipment. EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques. EN 301 489-24 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA direct spread (UTRA) for mobile and portable (UE) radio and ancillary equipment. ETSI EN 301 511 Global system for mobile communications (GSM); Harmonised EN for mobile stations in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.2 of the R&TTE directive (1995/5/EC). ETSI EN 301 489-1 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements. ETSI EN 301 489-7 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS). ETSI EN 301 489-17 Electromagnetic compatibility and Radio spectrum Matters (ERM);
Appendices 38 Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific conditions for 2.4 GHz wideband transmission systems. ETSI EN 301 908-1 & -2 Electromagnetic compatibility and Radio spectrum Matters (ERM); Base Stations (BS), Repeaters and User Equipment (UE) for IMT-2000 Third Generation cellular networks; Part 1: Harmonised EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive. EN 50385 Product standard to demonstrate the compliance of radio base stations and fixed terminal stations for wireless telecommunication systems with the basic restrictions or the reference levels related to human exposure to radio frequency electromagnetic fields (110 MHz - 40 GHz) - General public. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: x Reorient or relocate the receiving antenna. x Increase the separation between the equipment and receiver. x Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. x Consult the dealer or an experienced radio/TV technician for help. FCC Caution To assure continued compliance, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. (Example - use only shielded interface cables when connecting to computer or peripheral devices). This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Appendices 39 FCC Radiation Exposure Statement This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. Max. SAR levels: 1.180 W/kg GCF RoHS/WEEE Glossary 2G: Second-generation mobile networking technology. Represents a switchover from analog to digital; most 2G networks use GSM. 3G: Third-generation mobile networking technology that enables simultaneous transfer of voice and non-voice data; most 3G networks use WCDMA. 3.5G: A more recent standard of mobile networking technology; generally uses HSDPA. 3.75G: A more recent standard of mobile networking technology; generally uses HSUPA. APN (Access Point Name/Network): Provides GPRS routing information. Consists of: Network ID: Identifies the external service requested by a GPRS user. Mobile network operator ID: Specifies routing information. ARFCN (Absolute Radio Frequency Channel Number): The specific ID numbers for all radio channels used in cellular mobile communications. bps (bits per second): How data flow is measured. CHAP (Challenge Handshake Authentication Protocol): CHAP identifiers are changed frequently and authentication can be requested by the server at any
Appendices 40 time. DNS (Domain Name System): Helps route network traffic by making the addressing process more user-friendly. DHCP (Dynamic Host Configuration Protocol): How devices obtain IP addresses from a server. DUN (Dial-Up Network): Windows component that enables online access via a modem. EDGE (Enhanced Data GSM Environment/Enhanced Data for Global Evolution): Advanced GPRS that delivers multimedia and other data needing greater bandwidth at up to 237 kbps. GPRS (General Packet Radio Service): Delivers data in packets at up to 86 kbps. GSM (Global System for Mobile Communications): The most popular cellular network, mostly operates in 850-900 or 1800-1900 MHz; the primary 2G system. HSDPA (High Speed Downlink Packet Access): Advanced WCDMA that delivers downlink bandwidth intensive data at up to 7.2Mbps; typically associated with 3.5G. HSUPA (High Speed Uplink Packet Access): Advanced WCDMA that delivers uplink bandwidth intensive data at up to 5.76Mbps; typically associated with 3.75G. HSPA+ (High Speed Packet Access +): This is also known as HSPA Evolved, is the next step and is more focused on delivering data services enabling speeds of up to 42Mbps in the downlink and 11Mbps in the uplink. IMEI (International Mobile Equipment Identity): A number unique to each GSM/UMTS device that can be used block network access by a stolen mobile device. IP (Internet Protocol): Routes packets over a network. Kbps (Kilobits per second): A data flow measure; 1024 bits/second. LAN (Local Area Network): A data network with limited range but good bandwidth. Mbps (Megabits per second): A data flow measure; 1,048,576 bits/second. PAP (Password Authentication Protocol): The difference between PAP authentication and a manual or scripted login, is that PAP is not interactive. The username and password are entered in the client's dialing software and sent as one data package as soon as the modems have established a connection, rather than the server sending a login prompt and waiting for a response. PPP (Point-to-Point Protocol): An internet connection method. PIN (Personal Identity Number): Four to eight digital numbers SIM card security code; allows access to the carrier’s network. Rx: Shorthand for Reception. SIM (Subscriber Identity Module): A small card that contains key mobile device identification, subscription and contact information. Tx: Shorthand for Transmission.
Appendices 41 WCDMA (Wideband Code Division Multiple Access): Advanced EDGE that supports 384kbps data flow. Most 3G networks use this standard, the same as UMTS. WPA: Wi-Fi Protected Access WPS: Wi-Fi Protected Setup

Navigation menu