BandRich W300 Drawing Board User Manual Manual English

Download:
Mirror Download [FCC.gov]
Document ID	3423328
Application ID	m5wIGD0hP2N9IsZIA6T3yA==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	93.86kB (1173225 bits)
Date Submitted	2017-06-13 00:00:00
Date Available	2017-12-10 00:00:00
Creation Date	2017-04-10 14:17:23
Producing Software	GPL Ghostscript 9.0
Document Lastmod	2017-05-26 10:14:12
Document Title	Manual English
Document Creator	PDFCreator Version 1.1.0
Document Author:	vincent.lee

The Federal Communication Commission Statement
This equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to
Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction, may cause harmful interference to
radio communication.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one of more of the following measures: -
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced Radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment. You are cautioned that change or
modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF FCC RULES.
OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS:
This device may not cause harmful interference and
This device must accept any interference received, including interference that may cause undesired
operation.
The antenna used for this transmitter must not be collocated or operation in conjunction
with any other antenna or transmitter.
Notice :
The changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change
to the antenna or the device is permitted. Any change to the antenna or the device could result
in the device exceeding the RF exposure requirements and void user’s authority to operate
the device.
3. Once the set up complete, data could be synced or transferred to the device.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : GPL Ghostscript  9.0
Keywords                        : 
Modify Date                     : 2017:05:26 10:14:12+08:00
Create Date                     : 2017:04:10 14:17:23+08:00
Creator Tool                    : PDFCreator Version 1.1.0
Metadata Date                   : 2017:05:26 10:14:12+08:00
Document ID                     : fa771322-2010-11e7-0000-de09ab3e5ab8
Instance ID                     : uuid:52e6e885-9420-41da-925b-d577bfaeaf10
Format                          : application/pdf
Title                           : Manual English
Creator                         : vincent.lee
Description                     : 
Description (x-repair)          : 
Has XFA                         : No
Page Count                      : 4
Subject                         : 
Author                          : vincent.lee

EXIF Metadata provided by EXIF.tools