Bang and Olufsen a s LBWA1ZZPD Wireless Communication Module User Manual TV

Bang & Olufsen a/s Wireless Communication Module TV

User Manual TV

BEOPLAYV1 BeoPlayV1–32BeoPlayV1–40Draft 02.05.12
Draft 02.05.12
This Getting Started contains information about the setting up and daily use of your B&O PLAY product and connected equipment. Your television offers more features and functions than described in this Getting Started. Among other things; Sleep Timers, pin code system and network settings. These and other features are described in more detail in the product’s online guide or in the help texts in the television menus.The guides are found on www.beoplay.com/v1/support.The guides and the on-screen help texts are also kept up to date if new software introduces new or modied features and functions in your television. On www.beoplay.com/v1 you can also nd more information and relevant FAQs (Frequently Asked Questions) about your product. Your retailer is your rst stop for all your service queries. Dear Customer Technical specications, features and the use thereof are subject to change without notice. 3511018 Version 1.0 1201 Draft 02.05.12
WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of un insulated “dangerous voltage” within the product’s en closure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equi-lateral triangle is intended to alert the user to the presence of important operating and main tenance (servicing) instructions in the literature accompanying the product. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not t into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specied by the manufacturer. Use only with the cart, stand, tripod, bracket, or table specied by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long periods of time. Refer all servicing to qualied service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not ope rate normally, or has been dropped. Cautions – Ensure that the television is positioned, set up and connected in accordance with the instructions in this Getting Started. To prevent injury, use Bang & Olufsen approved stands and wall brackets only! – Place your television on a rm, stable surface. – Do not place any items on top of your television. – Do not subject the television to rain, high humidity or sources of heat. – The television is intended for indoor use in dry, domestic environments only. Use within a temperature range of 10–40°C (50–105°F). – If the television has been exposed to temperatures below 5°C (40°F), leave it at room temperature and wait until the television has regained normal room temperature before it is connected to the mains and switched on. – Do not place the television in direct sunlight or direct articial light, such as a spotlight, as this may reduce the sensitivity of the remote control receiver. Also if the screen is overheated, black spots may appear in the picture. These spots disappear again, once the television cools down to normal temperature. – Leave enough space around the television for adequate ventilation. – No naked ame sources, such as lighted candles should be placed on the apparatus. – To prevent the spread of re, keep candles or other open ames away from this product at all times. – Do not attempt to open the television. Leave such operations to qualied service personnel. – Do not strike the glass with hard or pointed items. – The television can only be switched off completely by disconnecting it from the mains socket. The mains socket must always be accessible.– Follow instructions to ensure correct and safe installation and interconnection of equipment in multimedia systems. – The product label is placed behind the connection cover.Draft 02.05.12
Contents Setting up 6 How to set up your television 8 Connection panel – BeoPlayV1–3210 Connection panel – BeoPlayV1–40 Daily use 12 How to use your remote control 13 How to navigate in menus15 Watch television 16 Media browser17 Change picture or sound settings18 Cleaning19 How do I…Draft 02.05.12
How to set up your televisionImportant – guides and FAQs are found on www.beoplay.com/v1/support To ensure proper ventilation, allow enough space around the screen. Do not cover the ventilation grill. At over heating (ashing standby indicator and an on-screen warning), switch the TV to standby, not off, in order for the TV to cool down. You cannot operate the TV during this time. Connect your television to the Internet to receive software updates and download Peripheral Unit Controller (PUC) tables. It is recommended that you set the television to update software automatically.For more information on wired or wireless setups, see the online guide and the guide enclosed with the wireless network antenna. VentilationEthernet connectionNetwork settingsGuides and more information, for example, FAQs (Frequently Asked Questions) are found on www.beoplay.com/v1. Unpack the television and place it on a soft blanket. Remove the four pins from the television. Before mounting the stand or wall bracket, remember to insert the speaker cover. Hold the speaker cover with both hands and slide it carefully into the hole on the side of the television.Then mount the stand or wall bracket (see separate guide).1.Unpack the television2.Insert speaker cover and mount stand/wall bracketTo remove the speaker cover, gently push it out using one of the four pins removed from the television. If the television is mounted on the table stand or wall bracket, you must rst remove the sides on the stand or wall bracket to remove the speaker cover. See the guides enclosed with the stand or wall bracket.– To remove the connection cover, pull out at the bottom rst to release the cover, then pull it off. – Connect the mains cord and Ethernet cable. For a wireless connection, connect the wireless network antenna. – Switch on the television (press TV). If prompted for a pin code, enter the pin code provided by your retailer and continue with rst-time setup (see next page).3.Connect your TVWLANANTENNA6Mains supplyWireless network antennaEthernetDraft 02.05.12
Setting upThe indicator light ashes green shortly and the TV is ready to be used. To reduce start up time, see the online guide regarding power settings. The TV is in standby but leave it connected to the mains supply due to software downloads.The TV has been disconnected from the mains supply and you must enter the pin code. See the online guide for more information on the pin code system, available on www.beoplay.com/v1/support.Do not disconnect the TV from the mains supply. Could be due to new software being activated or too many failed pin code attempts. The TV is in standby and you can disconnect it from the mains supply if you want. However, this activates the pin code system.Indicator light – GreenSolid redSlowly ashing redQuickly ashing redOff You can fasten the cables to either sides or in the middle, depending on stand or wall bracket placement. For safety reasons, secure the cables with the enclosed cable ties.When you have made all the connections, mount the connection cover.6.Run cablesIf you have a wall bracket, make sure that there is enough slack in the cables to allow the TV to turn before you fasten the cables with cable ties to make a neat bundle.Follow on-screen instructions. When available, press the blue button for help texts. MENU LANGUAGE SOFTWARE UPDATE (USB)COUNTRYNETWORK SETTINGSSOFTWARE UPDATE (INTERNET)SPEAKER SETUPSOURCE LIST SETUPNICE TO KNOW4.First-time setupYou will be guided through a number of menus where you must make different settings. Use the Beo4 navigation button , , and , and press in the middle to select settings. In some submenus, press BACK to return to rst-time setup.You can change the settings again later if you wish. If you receive your TV signal via a set-top box, select DONE in SOURCE LIST SETUP. Set up your set-top box as illustrated below. The illustration here is only one example of many possible setups. When you connect external equipment, for example a set-top box, to the HDMI IN socket on the television (see next pages), you are prompted to congure the source. Follow on-screen instructions. For information on other setup options, PUC tables and IR-transmitters, see the online guide available on www.beoplay.com/v1/support.5.Connect external equipmentFor information on your Beo4 remote control, see page12 or your Beo4 guide.TVBACK7INTERNETPUCHDMIETHERNETIt is possible to control non-Bang& Olufsen equipment using the Beo4 remote control with Peripheral Unit Controller (PUC) table. For PUC to work, an IR-transmitter has to be placed close to the IR-receiver on the connected equipment. Check the IR-signal before attaching the IR-transmitter. Indicator lightDraft 02.05.12
Connection panel – BeoPlayV1–32Important Any equipment you connect to the connection panel must be registered in the SOURCE LIST SETUP menu. Mains cord and plug Connect the ~socket on the connection panel of your TV to the wall outlet. The TV is in standby mode and ready to be used. The supplied plug and mains cord are specially designed for the product. Do not change the plug and if the mains cord is damaged, you must buy a Bang& Olufsen approved mains cord. 1*Make sure the cable connection between the product and the router does not exit the building to avoid contact with high voltage.Ethernet ( )*1For connection to the Internet. For software updates or for UPnP streaming of digital photos, video or music les from, for example, a NAS deviceSATELLITE (14/18V – 0.4A) Not in use2 x COMMON INTERFACE (CA Module) Not in useUSB ( , 5V – 0.5A) For connection of a USB device to browse digital photos, video or music lesAERIAL (5V – 50mA) Not in use~ – Mains supply Connection to the mains supplyANTENNA WLANFor connection of wireless network antennaWLANANTENNAAERIAL COMMON INTERFACESATELLITECHIPSIDECHIPSIDE5V 50mA8Draft 02.05.12
Setting upPL1–3 (Power Link) For connection of external speakers in a surround sound setup. See the online guide for more information*2HDMIIN (1–5) The High Denition Multimedia Interface allows you to connect many different video sources, such as set-top boxes, game consoles, multimedia players, Blu-ray players, or a PCS/P-DIFIN Digital audio input socket PUC1 A+B (CTRL2)/PUC2 A+B (CTRL3) For IR control signals to external equipment connected to an HDMIIN or AV IN socket. Allows you to control non-Bang& Olufsen equipment with a Beo4 remote control with navigation button*2CTRL(1) Not in useAVIN For connection of analogue video equipment. Special adaptor neededCables and adaptorsEthernet connection2*Online guideDepending on the type of equipment you connect to the television, different cables and maybe also adaptors are needed. Cables and adaptors are available from your Bang& Olufsen retailer. Connect your television to the Internet to receive software updates and download Peripheral Unit Controller (PUC) tables. It is recommended that you set the television to update software automatically.The online guide includes more information about setup and connection of external equipment.We recommend that you connect the television to the Internet to be able to receive software updates and to download Peripheral Unit Controller (PUC) tables. PUC tables enable you to operate connected non-Bang& Olufsen products with the Beo4 remote control with navigation button.54321CTRL 1S/P-DIFIN HDMI INAVINCTRL 2PUC 2 A+BCTRL 3PUC 1 A+B PL 1PL 2PL 39Draft 02.05.12
Any equipment you connect to the connection panel must be registered in the SOURCE LIST SETUP menu. Connection panel – BeoPlayV1–40USB ( , 5V – 0.5A) For connection of a USB device to browse digital photos, video or music lesEthernet ( )*1For connection to the Internet. For software updates or for UPnP streaming of digital photos, video or music les from, for example, a NAS device SATELLITE (14/18V – 0.4A) Not in useAERIAL (5V – 50mA)Not in use2 x COMMON INTERFACE (CAModule) Not in useImportant Mains cord and plug Connect the ~socket on the connection panel of your TV to the wall outlet. The TV is in standby mode and ready to be used. The supplied plug and mains cord are specially designed for the product. Do not change the plug and if the mains cord is damaged, you must buy a new one from your Bang& Olufsen retailer. 1*Make sure the cable connection between the product and the router does not exit the building to avoid contact with high voltage.AERIAL COMMON INTERFACESATELLITECHIPSIDECHIPSIDE5V 50mA10Draft 02.05.12
Setting up~ – Mains supply Connection to the mains supply ANTENNA WLANFor connection of wireless network antennaPL1–3 (Power Link) For connection of external speakers in a surround sound setup. See the online guide for more information*2HDMIIN (1–5) The High Denition Multimedia Interface allows you to connect many different video sources, such as set-top boxes, game consoles, multimedia players, Blu-ray players, or a computerS/P-DIFIN Digital audio input socketPUC1 A+B (CTRL2)/PUC2 A+B (CTRL3) For IR control signals to external equipment connected to an HDMIIN or AVIN socket. Allows you to control non-Bang& Olufsen equipment with a Beo4 remote control with navigation button*2CTRL(1) Not in useAVIN For connection of analogue video equipment. Special adaptor neededCables and adaptorsEthernet connection2*Online guideDepending on the type of equipment you connect to the television, different cables and maybe also adaptors are needed. Cables and adaptors are available from your Bang& Olufsen retailer. Connect your television to the Internet to receive software updates and download Peripheral Unit Controller (PUC) tables. It is recommended that you set the television to update software automatically.The online guide includes more information about setup and connection of external equipment.We recommend that you connect the television to the Internet to be able to receive software updates and to download Peripheral Unit Controller (PUC) tables. PUC tables enable you to operate connected non-Bang& Olufsen products with the Beo4 remote control with navigation button.WLANANTENNA54321CTRL 1S/P-DIFIN HDMI INAVINCTRL 2PUC 2 A+BCTRL 3PUC 1 A+B PL 1PL 2PL 311Draft 02.05.12
TV LIGHT RADIO DTV DVD CD V.MEM TEXT A.MEM7 8 9 4 5 6 LIST 0 MENU 1 2 3 STOP PLAYBACKHow to use your remote control Select colour specic functions Adjust volume To mute, press the middle of the button The Beo4 display shows you the activated source or function Navigation button left, right, up and down , , and . Move in menus by pressing the button in the direction you need Centre button is used for selecting and accepting Search backwards or forwards step by step Hold to rewind or wind Start playback Switch on, for example, a connected set-top box Standby Bring up the main menu of the active source Pause and stop playback Switch on the TV*1 Select channels and enter information in on-screen menus Step through channels Move backwards through menus and the Beo4 list. Long press to exit menus completely Display extra “buttons” for functions or sources in the Beo4 display. Use or to step in the listSome buttons can be recongured during the setup process. See the online guide for more information. NOTE! For general information about remote control operation, see the guide enclosed with your remote control. Check that your Beo4 remote control is in MODE1. See page19 on how to set up your Beo4.1*Beo4 buttons MODE settingsYour television can be operated with a Beo4 remote control with navigation button as described in this Getting Started and the online guide, available on www.beoplay.com/v1/support. Important – guides and FAQs are found on www.beoplay.com/v1/support TV PLAYTVDTV0 – 9STOPMENUBACKLIST12Draft 02.05.12
Daily useNavigate in menus and select settings using your remote control. Select source and adjust settings.Display and menus How to navigate in menusInformation 1*Main menuHelp textsYou can always bring up the main menu including a menu overlay listing all the special functions for the active source.In the SETUP menu, you can show/hide help texts using the blue button. Some help texts may cover the menu. For some languages, help texts are only available in English. Show menu*1 or Switch on TV When a menu is on the screen, you can move between menu options, reveal settings or enter data. Navigate in menus Highlight menu /change setting Enter data Bring up sub-menu/store setting Select option Move backwards through menus or Press and hold to exit menus Some menus take up more space than available on the television screen. This is indicated by half a menu item at the bottom or top of the screen. To easily step from the top of a list to the bottom, use the navigation button up.Step between menu pagesStep in pages Scroll through menu itemsA solid line indicates that selection must be made using the centre buttonA gradient line indicates that you can edit settings using the navigation button left and rightSwitch on connected equipmentTV MENU BACK BACK 0–9 CHANNEL LISTCNN 1TV 2 NEWS 2DISCOVER 3CWNBC 4BBCWORLD 5… 6… 7SUPER CH 8… 9CRIME TV 10CINEMA 11Wednesday 09 November, 2011PIN CODE PIN CODE OFFNEW PIN CODEWednesday 09 November, 2011V.MEM 13Example of channel list.Draft 02.05.12
>>How to navigate in menusInformation You can bring up help texts with explanations of features and functions when available in menus and submenus. General features and functions are also explained in the NICE TO KNOW menu.*1Bring up help texts Show/hide help textsBring up main menu Select option You can select a source just by pressing the dedicated button on the remote control, or you can select a source via the menu.Select source Select source Bring up main menu Select SOURCE LIST Access the menu from the SETUP menu. You can read about basic features and functions. When your television receives software updates (requires Internet connection), new features and functions will be explained here.1*NICE TO KNOW menuBring up the SETUP menuMENU MENU 14Draft 02.05.12
Daily useWatch television Choose a TV channel by its number, switch to another channel or adjust the sound volume.Information Programme Guide and information For information about Programme Guide and information, see the online guide on www.beoplay.com/v1/support.Adjust the volumeAdjust volume Press to bring sound back Press in the middle to mute sound Bring up and use the menu overlay You can bring up the main menu including functions for the active source. Press Activate the desired function orSelect a channel Select Select channel orSelect previous channel Switch on the TV Press, for example, TV 1–9 MENU 0–9 0 TV15Draft 02.05.12
1*Beo4 LISTStorage devicesAccess MEDIA BROWSER sourceIf you do not have the MEDIA button in the Beo4 LIST, you can dedicate another button to the media browser in the SETUP menu. See page19.You can connect, for example, USB devices and hard disks connected via USB or Ethernet.You can bring up the main menu, select SOURCE LIST, highlight MEDIA BROWSER, and press the centre button to activate the media browser. Media browser You can play music and video files and browse photos stored either on a storage device or in a product connected via a DLNA/UPnP enabled media server. For more information about connections and functions, see the online guide.Connect a storage deviceBring up MEDIA in your Beo4 display*1When you connect a storage device to your television, it detects the source automatically and asks if you want to browse the content.You can also access the MEDIA BROWSER menu via the SETUP menu.Information Browse your photosListen to your musicSelect storage device with musicSelect storage device with photosStep between previous and next photoBrowse les and folders and press to start slideshowBrowse in les or step in tracks. Select a music le to start playbackPause Resume playback Back up through menus or hold to return to the media browser main menuSelect the folder with the music you wish to listen to.Select the folder with the photos you wish to watch.Playback video lesSelect storage device with video lesStep minute by minute. Press and hold to cue. Press again to change cue speedBrowse les and folders and press to openSelect the folder with the video les you wish to watch.PauseResume playbackMEDIA STOP PLAY BACK STOP PLAY 16Draft 02.05.12
Daily use1*Beo4 LIST In order to display SOUND or PICTURE on Beo4, you must rst add them to the Beo4 list of functions, see page19.Change picture and sound settingsInformation While you watch television, you can adjust the sound and picture settings. See the online guide on www.beoplay.com/v1/support for more information about these settings.Select picture modes You can activate different picture modes to use for different types of programmes. When you select a picture mode for a source, it is only saved until you switch off the television or switch to a different source. In the SOURCE LIST SETUP menu, you can, for each source, set up a picture mode to be used each time you activate this source. Select sound modes The television has several sound modes optimised for different types of programmes. In the SOURCE LIST SETUP menu, you can, for each source, set up a sound mode to be used each time you activate this source. Bring up sound modes on the television screen and select mode*1Bring up picture modes on the television screen and select mode*1Select between picture modes 1–3 if you remember the number of the mode you want*1Select between sound modes 1–9 if you remember the number of the mode you want*1ororSelect picture format In the SOURCE LIST SETUP menu, you can, for each source, set up a picture format to be used each time you activate this source. You can also select a different picture format temporarily. To reduce black bars in top and bottom, the picture is scaled and stretched horizontally to ll out as much of the screen as possibleThe source determines the picture formatTo reduce black bars in top and bottom, the picture is scaled without changing the picture geometry. However, if a 4:3 source signals a wrong aspect ratio, the picture will be stretched horizontallySOURCE FORMAT (select 3)AUTO WIDE (select 2) AUTO (select 1)Select between picture formats 1–3 if you remember the number of the format you want Bring up picture formats on the television screen and select formatorSwap between formatsLISTLIST 1–3 1–9 SOUND PICTURE LIST SOUND LIST PICTURE 1–9 1–3 LIST 1–3 FORMAT LIST FORMAT 1–3 17Draft 02.05.12
CleaningRegular maintenance, such as cleaning, is the responsibility of the user. To achieve the best result, follow the instructions below.Screen SpeakersCabinet– Avoid spraying liquid directly on the screen as this may damage the speakers. – The speakers may be cleaned with a vacuum cleaner with a brush nozzle, and set to the lowest suction level. – To remove the speaker cover, gently push it out using one of the four pins removed from the television. When the television is mounted on the wall bracket or table stand, you must rst remove the sides on the stand or wall bracket to remove the speaker cover. See guide enclosed with the stand or wall bracket.– Wipe dust off the screen using a dry, soft cloth. – To remove stains or dirt, use a soft, lint-free, rmly wrung cloth and water.– Never use alcohol or other solvents to clean any parts of the TV.– Do not strike the screen with hard or pointed items.– Some micro-bre cloths may harm the optical coating due to their strong abrasive effect.– Wipe dust off the surfaces using a dry, soft cloth. – To remove stains or dirt, use a soft, lint-free, rmly wrung cloth and a solution of water and mild detergent, such as washing-up liquid.– Never use alcohol or other solvents to clean any parts of the TV.18Draft 02.05.12
How do I……select another Beo4 button to activate a source?> Press MENU and bring up the SETUP menu.> Bring up the SOURCE LIST menu.> Select the source you want to congure, for example MEDIA BROWSER, and press the centre button.> Step to the BUTTON menu and use the navigation button right to bring up the list of buttons.> Use the navigation button up and down to step between the buttons and press the centre button to select the button you want to use.…add a new ‘button’ to my Beo4 list?> Press and hold the standby button down.> Press LIST to get access to the Beo4 setup function.> Let go of both buttons. ADD? appears in the display.> Press the centre button and use the navigation button up to select, for example, AV?> Press the centre button to bring up the list of extra ‘buttons’ to add from. The rst ‘button’ appears in the display, it ashes on and off.> Press the navigation button up and down to move forwards or backwards in the list of extra ‘buttons’.> Press the centre button to add and place the ‘button’ on its preset position in the list, or …> … press 1 – 9 to insert the ‘button’ at a specic position in the list.> ADDED appears, indicating that the ‘button’ has been added. Long press on BACK will leave the setup.To activate some functions on your Beo4 remote control, you must rst add the ‘button’ to the Beo4 list of functions.If you want another Beo4 button to activate a source, you can change this in the SOURCE LIST SETUP menu.…set my Beo4 in MODE1?> Press and hold the standby button down.> Press LIST to get access to the Beo4 setup function.> Let go of both buttons. ADD? appears in the display.> Press LIST or navigation button up to display MODE? on Beo4.> Press the centre button to select the setup you want.> Press the navigation button up and down to display MODE1 on Beo4.> Press the centre button to store the conguration.> STORED appears, indicating that the conguration has been stored. Long press on BACK will leave the setup.A Beo4 remote control with navigation button must be set to MODE1.For more information on your Beo4 remote control, see the Beo4 guide.19Draft 02.05.12
Electrical and electronic equipment, parts and batteries marked with this symbol must not be disposed of with normal household wastage; all electrical and electronic equipment, parts and batteries must be collected and disposed of separately. When disposing of electrical and electronic equipment and batteries by use of the collection systems available in your country, you protect the environment, human health and contribute to the prudent and rational use of natural resources. Collecting electrical and electronic equipment, batteries and waste prevents the potential contamination of nature with the hazardous substances which may be present in electrical and electronic products and equipment. Your Bang& Olufsen retailer will advise you of the correct way of disposal in your country. Waste Electrical and Electronic Equipment (WEEE) – Environmental protection This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.HDMI, the HDMI Logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. This product complies with applicable environmental legislation throughout the world. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and the Symbol together are registered trademarks & DTS 2.0 Channel is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.20Draft 02.05.12
For the US-market only! Changes or modications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the antenna and your body.TYCO 1513712-1; Linear; Gain 2.4 GHz: 0 dBi, 5 GHz: 3 dBi; Impedance 50 ohm.For the Canadian market only! This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. This radio transmitter (IC ID: 3775B-LBWA1ZZPD) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Antenna list:TYCO 1513712-1; Linear; Gain 2.4 GHz: 0 dBi, 5 GHz: 3 dBi; Impedance 50 ohm.Please note that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars can cause interference and/or damage to LE-LAN (License-exempt Local Area Network) devices. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the antenna and your body.Destiné uniquement au marché canadien ! Cet appareil est conforme au(x) standard(s) RSS exempt(s) de licence d’Industrie Canada. Son fonctionnement est sujet aux deux conditions suivantes : (1) cet appareil ne doit pas occasionner d’interférence et (2) cet appareil doit supporter toutes les interférences, y compris celles qui pourraient provoquer un mauvais fonctionnement de cet appareil.Compte tenu des règles mises en place par Industrie Canada, cet émetteur radio ne peut fonctionner qu’à l’aide d’une antenne dont le type et le gain maximal ont été approuvés par Industrie Canada. An de réduire le risque d’interférence radio avec les autres utilisateurs, le type d’antenne et son gain doivent de préférence être choisis de manière à ce que la puissance isotrope rayonnée équivalente (PIRE) ne dépassent pas le niveau nécessaire à une communication efcace. Cet émetteur radio (IC ID: 3775B-LBWA1ZZPD) a été approuvé par Industrie Canada dans le cadre d’une utilisation avec les types d’antennes repris ci-après, avec le gain maximum autorisé et l’impédance requise indiqués au regard de chaque type d’antenne. L’utilisation de types d’antennes non repris dans cette liste ou dont le gain est supérieur à celui indiqué pour leur type est strictement interdite en conjonction avec cet appareil.Liste d’antennes :TYCO 1513712-1 ; linéaire ; gain à 2,4 GHz : 0 dBi, à 5 GHz : 3 dBi ; impédance 50 ohm.Please note that high-power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350 MHz and 5650-5850 MHz and these radars can cause interference and/or damage to LE-LAN (License-exempt Local Area Network) devices. Cet appareil est conforme aux limitations de la norme IC RSS-102 concernant l’exposition aux radiations dans un environnement non contrôlé. Cet appareil doit être installé et utilisé avec une distance minimale de 20 cm entre l’antenne et le corps de l’utilisateur.21Draft 02.05.12
Draft 02.05.12
Draft 02.05.12
Draft 02.05.12

Navigation menu