Banner Registration Mark Sensor R58 Expert Users Manual
Registration Mark Sensor R58 Expert a079_uk_eng
R58 Expert to the manual e2388ac9-b265-4d16-8222-e19bd23f8605
2015-02-02
: Banner Banner-Registration-Mark-Sensor-R58-Expert-Users-Manual-480709 banner-registration-mark-sensor-r58-expert-users-manual-480709 banner pdf
Open the PDF directly: View PDF 
.
Page Count: 2
R58 Expert™
R58 Expert™
Registration Mark
Sensor
• Optimal contrast derived from a
combination of 3 LED colours and 16
levels of grey scale analysis
• Ultra-fast response time of 50 µs
(10 kHz switching frequency) allowing
precise detection and positioning
• Extreme performance stability
resulting from advanced micro-
processor algorithms and virtually no
temperature drift or warm up effect
• Configuration using TEACH button
to teach Static, Dynamic or Manual
Adjustment; optional via remote wire
• Indicator LEDs to show status, DO
or LO and provide 30 ms ON-delay
selection
• 8-Segment bar graph for setup
and signal strength visualisation and
control
• Robust metal housing with standard
positioned mounting holes and two
different output configurations
• Working distance of 10 mm ±3 mm
• Two lens positions (on-axis or right-
angle) and two spot positions (vertical
or horizontal) possible
Automatic detection of
any colour mark
Park Lane, Culliganlaan 2F
1831 Diegem • Belgium
Tel: +32 2 456 07 80
Fax: +32 2 456 07 89
E-mail: mail@bannereurope.com
Web: www.bannereurope.com
BANNER ENGINEERING EUROPE
E-A079 – 02/2007
Authorised distributor:
SAFETYSENSORS VISION
Objective: To detect registration marks on food packaging.
Description: The R58 Expert automatically chooses one
of three sensing LEDs – red, green or blue to maximise
contrast when detecting registration marks.
Registration Mark Detection
Objective: To identify splices on a roll of paper.
Description: The highly sensitive R58 Expert detects the
inconspicuous splice in a roll of paper, ensuring that the
printer skips over the splice.
Splice Detection in a Paper Roll
On-axis or right-angle
lens position possible
Power LED
Dynamic TEACH (+)
Push Button
Dark Operate LED
Light Operate LED
Static TEACH (-)
Push Button
Output LED
ON-Delay
Switch Point
8-Segment
Light Bar
Objective: To detect registration marks on tubes for
correct positioning before filling.
Tube Registration Mark Detection
Versions available with
M12x1 connector (5-pin)
or cable
Horizontal spot position
3 LED colours
available
Vertical spot position
