Baojia Battery Technology BTS500 BOOMIN User Manual BOOMIN 16

Shenzhen Baojia Battery Technology Co., Ltd. BOOMIN BOOMIN 16

user manual

11BOOMINTALKING - paired with Two phonesTap the button once to answer a call fromeither one of the paired phones.Tap the button to end the 1st Phone’s call and answer the 2nd phone’s calling call. If you want to hold the 1st phone’s call, Double-tap button to hold the call.BOOMINUSER MANUALBOOMINACCESSORIES2BOOMINABOUT1BOOMINSPECIFICATIONS3 Hand strap Model : BTS500Talk time : Up to 9 hoursMusic playing Time : Up to 9 hours depending on volume and music typeStandby : 45 daysCharging time : 2-3 hours (for full)Weight : 180gDimensions : 55.6(W)×73(L)×55.6(H)mmColors : light blue/chocolate/red/pinkLow Energy Bluetooth Version : 4.0Wireless range : 10m (33 feet)Support: A2DP/AVRCP/HFPCharging Plug : 5 PIN micro-USB, B TypeAnswer a Call▪ In pairing mode, Press & Hold button for 1 second to play or stop music, "beep" tone will be heard.▪ During music play, Press & Hold button for 2 seconds to play the previous song and Press & Hold button to play the next song.▪ During a call or music play, press button to volume up and button to volume down.Connected LED blinks twice every 7 secondsIncoming call LED blinks once every 1 secondsDisconnected LED blinks twice every 2 secondsTalkingLED blinks once every 7 secondsTurn on LED lights for 3 timesTurn Off LED lights for 2 secondsPairing modeMusic play LED twinkles continuallyCharging LED is always onCharging completed LED is offLED blinks quicklyBOOMIN12LED INDICATORCHARGINGBOOMIN13Use the included micro USB cable to connect BOOMIN to a USB wall charger or computer USB▪ When BOOMIN has low battery level, there will be voice prompt "Battery low".▪ LED is " " during charging.▪ LED is "OFF" when charging is completed.▪ fully charging BOOMIN takes 2-3 hours.▪ if you charge BOOMIN without turning it off, it is still connected to your mobile ONdevices BOOMIN14TROUBLE SHOOTING & FAQ BOOMIN15TROUBLE SHOOTING & FAQI hear crackling noisesFor the best audio quality, always put the BOOMIN close to your mobile device. I cannot hear anything from BOOMIN• Ensure that the BOOMIN is paired with the phone.• Make sure that the phone is connected to the BOOMIN, if it does not connect either from the phone’s Bluetooth menu or by pressing the button, follow the pairing instructions in Section 7. I have pairing problemsWill the BOOMIN work with other Bluetooth devices ?I cannot use reject call, redial or voice dialing, battery App meter You may delete your BOOMIN pairing connection in your mobile phone. Follow the pairing instructions in Section 7.These functions are dependent on your phone supporting them. Please check your mobile phone’s manual for further details.The BOOMIN is designed to work with Bluetooth mobile phones. It can also work with other devices that are compliant with Bluetooth version 4.0 and support a hands-free profile, A2DP music play. BOOMIN17CARE INSTRUCTIONS Taking care of your BOOMIN• Always store the BOOMIN with the power off and safely protected.• Avoid storage at extreme temperatures (above 45°C or below -10°C). This can shorten battery life and may affect operation.• Do not expose the BOOMIN to rain or other liquids.After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices must not be disposed of with domestic waste. Consumers are obliged by law to return electrical and electronic devices at the end of their service life to the public collection points that are set up for this purpose or designated points of sale. However, such details are defined by the national law of the respective country. This symbol on the product, the instruction manual or the packaging indicates that the product is subject to these regulations. By recycling, reusing the materials, or other forms of utilizing old devices, you are making an important contribution in protecting our environment. BOOMIN19WARRANTY CARDThank you for your purchase of MIPOW's product. MIPOW warrants that the product is, at the time of its original purchase is free of defects in workmanship and material. This Limited Warranty for the product shall last for twelve(12) months from the date of original purchase. This original warranty card and original invoice must be presented at the time you require warranty service or such warranty will be voided.This limited warranty is valid only if the product is used for the purpose for which it was designed. it does not apply to damage or loss caused by negligence; physical abuse; misuse; accident; exposure to moisture; dampness or extreme thermal; unauthorized modifications; unauthorized opening or repair; forces of nature; or other actions beyond the reasonable control of MIPOW. In case of when the warranty does not apply, a repair or replacement charge will be incurred. the customer shall be responsible for sending the defective product to and collecting the repaired or replaced product from the service centre.NB: MIPOW reserves the right to interpret the terms and conditions contained herein; and the right for any changes without prior notice.Limited Warranty20 BOOMINCUSTOMER SERVICE CENTERBattery Metershows on screen▪ Press & Hold button for 7 seconds on your BOOMIN to activate paring mode of the BOOMIN * you will hear the " the 3rd second and the voice prompt "pairing" at the 7th second and wboot music” at hite LED will blink during pairing.▪ Open your ▪ You will hear “beep” sound from BOOMIN when paired with phone, the LED flashes once every 7 seconds when paired.▪ If BOOMIN is connected before, it can be re-connected again when it is in standby mode.phone's Bluetooth settings, add or search for devices when "MIPOW_BOOMIN" appears, select it or enter pass code "0000" if asked.your Battery meter on iPhone shows up automatically when paired and connected.10BOOMINTALKING - paired with One phonePairing with TWO phones for the first time This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.BOOMIN5PUT ON THE HAND STRAP BOOMIN4OPERATIONBOOMIN6TURN ON / TURN OFF▪ Press & Hold button for 3 seconds to Turn on the BOOMIN, a white LED blinks twice and “boot music” will be heard.▪ Press & Hold button for 4 seconds to off the BOOMIN, a white LED lights up for 2 seconds and “Turn off music” will be heard.TurnStep 1. Activate Bluetooth on your phone2. Turn on BluetoothStep On an iPhone, iPod or iPadGo to SETTINGS > GENERAL > and enable Bluetooth.On a BlackberryGo to SETTINGS/OPTIONS > BLUETOOTH and enable Bluetooth.On an Android PhoneGo to SETTINGS > WIRELESS & NETWORK > Bluetooth Settings and enable Bluetooth. Other Cell PhonesReview the user manual that came with your phone Pair BOOMIN with your 1st phoneDeactivate BOOMIN pairing mode▪ ▪ For 6 minutes without connection, BOOMIN will power off automatically.Under pairing mode, BOOMIN will deactivate if there is no connection within 90 seconds. EQ Select (Equalizer-Audio effect)2 types of EQ - “Mega Bass” and “Rock” can be selected.When playing music, simultaneously Press & Hold both buttons, “beep” tone can be heard and “Mega Bass” is selected. Simultaneously Press & Hold both buttons again, “beep” tone can be heard and “Rock” is selected. BOOMINMicro USB cablePairingFunction Operation Voice prompt/TonePress & hold for 7s “Boot music”...pairingTurn On “Boot music”Turn Off“Turn off music”Answer call Tap the button “Beep”Hang up “Beep”Reject call “Beep Beep”Redial “Beep”Cancel dial “Beep”Function Operation Voice dial “Beep” Stop voice dial Switch phone & headset “Beep” “Beep” Play / pause Last song Next songFunction Operation Tone Tap the buttonWhen 1st phone on call, 2nd phone is calling (Answerthe 2nd phone call & End the1st phone call)“Beep” “Beep” “Beep” Function Operation Tone Volume Up Volume Down Answer while music play EQ Select Simultaneously press both buttons while playing musicNOTE : If your BOOMIN is connected before, then you just need to Press & Hold button for 2 secondsto reconnect the second phone. Otherwise, you need to repeat the steps in 7. (ie. Pages 10 - 13) for the pairing details.3157911131719212426282224681012161820232527BOOMINENGLISH ABOUTACCESSORIESSPECIFICATIONSOPERATION PUT ON THE HAND STRAPTURN ON / TURN OFFPAIRING with your 1st PhonePAIRING with your 2nd PhonePLAY MUSIC & EQ SELECTTALKING - paired with your One PhoneTALKING - paired with your Two PhoneLED INDICATORCHARGINGTROUBLE SHOOTING & FAQCARE INSTRUCTIONSENVIRONMENTAL PROTECTIONFCC STATEMENT & VOICE PROMPTWARRANTY CARDCUSTOMER SERVICE CENTER1234-78910-1314-1516-1718-2020212223242526-272829with incredibly big sound !BTS500ContentsPageBOOMIN7PAIRING with your 1st PhoneBOOMIN7PAIRING with 1st Phone...ContinuedBOOMIIN4OPERATION...Continued Double-Tap buttonBOOMIN4OPERATION...ContinuedBOOMIN4OPERATION...ContinuedTurn on your BOOMINBOOMIN7PAIRING with 1st Phone...ContinuedBOOMIN7PAIRING with 1st Phone...ContinuedBOOMIN8PAIRING with your 2nd Phone▪ When BOOMIN needs to pair with a second device, it needs to be restarted and reactivate the pairing mode.▪ Go to your phone's Bluetooth settings, add or search for devices when "MIPOW_BOOMIN" appears, select it or enter passcode "0000" if asked.▪ "beep" tone will be heard when paired.BOOMIN8PAIRING with 2nd Phone...ContinuedSimultaneous Press & Hold ” “buttons for 6 seconds to clear the old paired information, a “beep” tone will be heard. Tone“Beep” “Beep” _________9BOOMINPLAY MUSIC▪ The music will pause if there is an incoming call, Tap the button to answer the call. The music will play again once you end the call.9BOOMINPLAY MUSIC...Continued10BOOMINTALKING - paired with One phone...10BOOMIN TALKING - paired with One phone...Reject a Call Tap the button to answer an incoming call, a “beep” tone can be heard.While on a call, tap the button to hang off and end the call, a “beep” tone can be heard. End a CallRedial the Last Number Called To redial the last number called, Double-tap button, a “beep” tone can be heard. Cancel a CallInitiate a Voice Dial To cancel a call, Tap the button, a “beep” tone can be heard. To initiate a voice dial, Press & Hold button for 2seconds, then speak a command or a name. Switch call from BOOMIN to PhoneWhile you are speaking with the speakerphone ofBOOMIN and you want to switch the call to the Phone, just Press & Hold button for 2 seconds to transfer the call from BOOMIN to Phone. Function Voice PromptPair “Pairing”Turn On “Boot music”Turn Off “Turn Off music”Low battery “Battery low” BOOMIN16Environmental Protection BOOMIN18FCC STATEMENT14 15Press & hold for 3s Press & hold for 4s Press & hold button for 2s Press & hold button for 2s Press & hold button for 1s Tap the button Double-Tap button Tap the buttonPress & hold button for 2s Press & hold button for 2s Press & hold button for 2s VOICE PROMPT Tap the button Tap the button Tap the button Double-tap buttonWelcomeThank you for purchasing the MIPOW BOOMIN. We hope you enjoy it !BOOMIN CAN:Connect wirelessly by Bluetooth to Phones, Tablets and Laptops.Play music with a big clear sound and volume control.Chat with your friends on your phone, tabletor PC.- Use the BOOMIN as a speakerphone to make calls, answer calls and more...Please Read the Manual Before useBOOMIN is a low energy Bluetooth V4.0 compliant, mini size speaker with incredibly big and clear sound and bass. It is compatible with most cell phones, tablets PCs, notebooks and most devices with built-in Bluetooth. BOOMIN comes with 3 watts output power, its classic shape matches well with the anodized aluminum-alloy colors, it also comes with a detachableleather hand strap for easier carrying. With built-in microphone, it can be used as a portable bluetooth speakerphone.The built-in battery can support up to 9 hours talk time or 9 hours music playing time depending on volume and music type. It is compact in size and only measures 55.6(W) x 73(L) x 55.6(H)mm. With its voice guidance, MIPOW’s BOOMIN tells you what you need to know about pairing.MICYou can use the BOOM mini as a speakphone by connected wirelessly with Bluetooth to your phone, tablet or PC so that you can make calls or answer calls by speaking to the built-in microphone as shown below.Speakerphone Double-tap button to reject an incoming call, a “beep...beep” tone can be heard.Clear the old paired information 1 2345678910111213141516171819 ___MIPOW_BOOMINMIPOW_BOOMINMIPOW_BOOMINWhen 1st phone on call, 2nd phone is calling (Answerthe 2nd phone call & Hold the1st phone call) This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operatiion2918FCC STATEMENT...Continued BOOMIN

Navigation menu