Baojia Battery Technology BTX200 Bluetooth Headset User Manual 1
Shenzhen Baojia Battery Technology Co., Ltd. Bluetooth Headset 1
USERS MANUAL
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2240035 |
| Application ID | f6JJ7YeVz2E56BIsFPkw2Q== |
| Document Description | USERS MANUAL |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 183.46kB (2293245 bits) |
| Date Submitted | 2014-04-11 00:00:00 |
| Date Available | 2014-04-11 00:00:00 |
| Creation Date | 2014-03-25 16:37:02 |
| Producing Software | Corel PDF Engine Version 16.0.0.707 |
| Document Lastmod | 2014-03-25 16:37:02 |
| Document Title | 未命å -1 |
| Document Creator | CorelDRAW X5 |
| Document Author: | YangFun |
FCC Statement Wired Connections SKU: BTX200 Talk Time: 15 hours Standby Time: 25 days Charging Time: 1.5-2 hours Wireless Range: 10m(33ft) Bluetooth: V4.0 Weight: 190g Size: 185(L)x175(W)x30(T)mm Micro USB charging cable Turn On 3.5mm stereo cable Charging pouch Set the On/Off Switch to On, blue LED indicator lights up for 2 seconds, with boot prompt. If the M2 was connected with your devices before, the last one can be reconnected when M2 is in standby. (It will automatically power off if there is no connection for 5 minutes.) Use the included Micro USB charging cable to connect the M2 to any USB powered computer or wall charger. ⑤Multi-Function Button Bluetooth Pairing Answer/End Call Play/Pause Music ④Previous Song Bl uet ③Volume Down Set the On/Off Switch to Off, blue LED indicator lights up for 3 seconds, with turn-off prompt. Reject Call Under standby mode, press & hold the Next Song button and tap the Multi-Function button, the LED indicator will flash green and white alternately, then open your device’s Bluetooth settings, add or search for devices when “ M2” appears, select it andpair your device. ooth.Line - In ⑥LED Indicator V1.2 Turn Off 2 3 Under pairing mode, double tap Multi-Function button to reject an incoming call, prompt tone can be heard. 45 34 Voice Dial In pairing mode, simultaneously tap the Previous Song and Multi-Function button to initiate a voice dial.(only available for Bluetooth enabled cellphones) End Call Pairing ②Next Song Under pairing mode, tap Multi-Function button to answer an incoming call, a prompt tone can be heard. While on a call, tap Multi-Function button to end the call, prompt tone can be heard. ① Volume Up When the M2 is in low battery, “Battery Low” voice prompt can be heard and the white LED indicator flashes quickly. Fully charging M2 takes 1.5-2 hours. Answer Call Redial In pairing mode, double tap Multi-Function button to redial the last number you called. Play/Pause While listening to music, tap Multi-Function button to play/pause the music. 85 Volume Up/ Volume Down During a call or music play, tap “+” button to volume up and “-” button to volume down. (the highest and lowest volume will be prompted) Previous/ Next Song While listening to music, tap " < ”button to play previous song, prompt tone will be heard; tap “ > ”button to play next song, prompt tone will be heard. 67 While in wired connection, the operation varies in iOS system and Android system. M2 During a call, press & hold Multi-Function button for 2 seconds to switch the call from M2 to cellphone or from cellphone to M2 , a “beep” tone will be heard. EQ Switch While playing music, press & hold Multi-Function button to switch between different EQ types, a prompt tone will be heard. Bluetooth Status Indicator Connected LED blinks twice every 7 seconds Disconnected LED blinks twice every 2 seconds Pairing mode LEDs blink alternately and quickly Talking LED blinks once every 7 seconds Music play LEDs blink alternately and slowly Battery low LED blinks twice every 3 seconds Charging Charging complete PC and Notebook LED remains on LED remains on Battery Status Indicator: 1. There will be “Battery Low” voice prompt when the battery voltage is between 3.0V and 3.3V, LED blinks white quickly. 2. When the battery voltage is lower than 3.0V, it will automatically power off. Tablet Phone MP3 In standby mode, connect M2 to any audio device via the included 3.5mm jack stereo cable. USB Input Port 3.5mm Jack Connector On/Off Switch 8 9 DC M2 Bluetooth Headset Switch Cellphone & on off Accessories Specification [EN] Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference,and (2) This device must accept any interference received, including interference that may cause undesired operation. Caution The manufacture is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user authority to operate the equipment. Stereo Bluetooth Headphone M2 Warranty Card Limited Warranty Thank you for your purchase of MIPOW's product. MIPOW warrants that the product is at the time of its original purchase free of defects in workmanship and material. This limited warranty for the product shall last for twelve(12) months from the date of original purchase. This original warranty card and original invoice must be presented at the time you require warranty service or such warranty will be voided. This limited warranty is valid only if the product is used for the purpose for which it was designed. It does not apply to damage or loss caused by negligence; physical abuse; misuse; accident; exposure to moisture; dampness or extreme thermal; unauthorized modifications; unauthorized opening or repair; forces of nature; or other actions beyond the reasonable control of MIPOW. In case of with the warranty does not apply, a repair or replacement charge will be incurred. The customer shall be responsible for sending the defective product to and collecting the repaired or replaced product from the service centre. NB: MIPOW reserves the right to interpret the terms and conditions contained herein; and the right for any changes without prior notice. 10 11 12 產品規格 Micro USB 充電線 3.5mm音頻線 絨布袋 充電 將USB充電線的一端插 入電腦或牆充USB輸出 端接口，另一端插入藍 牙耳機Micro USB充電 端口。 開機狀態下，首先按多功能鍵不 放，然後短按下一曲按鍵，即進 入配對狀態，此時看到白燈綠燈 交替閃亮，表明藍牙在匹配搜尋 狀態，打開手機藍牙功能，搜索 到" M2",與之配對 即可。 接聽電話 已連接手機情況下， 有外部來電時， 短按多功能鍵， 接聽來電，有提示音。 連接藍牙手機， 待機條件下， 同時短按多功能鍵 和上一曲鍵就可以 語音撥號。 （需手機藍牙支持） 掛斷電話 ①加音量 ⑤藍牙配對， 接聽掛斷電話按鈕， 暫停/播放 ④ 上一曲 ② 下一曲 Bl uet 當電壓低電時, 藍牙會語音提示 ”BATTERY LOW”, 且白燈快閃,那麼需要重 新充電，在1.5-2小時完 成充電。 ooth.Line - In 當通話結束，短按多功能 鍵 ，掛斷電話, 有提示音。 關閉藍牙 撥動ON/OFF開關至OFF位置， 藍燈常亮3秒，有關機提示音。 ⑥LED指示燈 ③減音量 2 3 (友情提示：當耳機處於無連接狀態5分鐘後會自動關機) 在音樂播放狀態下, 短按多功能鍵實現 暫停播放切換。 語音撥號 末號重撥 在待機狀態下， 雙擊多功能鍵會撥出 最後撥出過的一組號碼。 34 85 音量調節 音樂狀態或通話 中短按音量鍵“+” 可調大音量，短按 音量鍵“-”可調小 音量。( 調節音量到 兩極端會有提示音) 上一曲/下一曲 在音樂播放狀態下, 短按功能鍵“ ”,即 上一曲,有提示音。 在音樂播放狀態下, 短按功能鍵“ ”,即 下一曲,有提示音。 拒接來電 已連接手機情況下， 有外部來電時， 雙擊多功能鍵 ， 拒絕來電, 有提示音。 有線耳機連接 從耳機到手機的聲音轉換 FCC 聲明 當 使 用 有 線 耳 機 連 接 時 ， 會 根 據 手 機IOS 系統和安卓系統的不同，會有不同的操作！ 在通話狀態下長按多功能鍵2秒，將聽到嘟一聲，這時聲音就從耳 機轉到手機上同樣的操作可以將聲音從手機轉回到耳機上。 EQ切換 在音樂播放狀態下，長按多功能鍵，EQ相互切換，同時有提示音。 藍牙指示燈狀態 連接待機狀態 未連接待機狀態 配對狀態 通話狀態 音樂播放狀態 低電狀態 充電過程 充電完成 燈每7秒閃2次 燈每2秒閃2次 燈 燈交替快閃 燈每7秒閃1次 燈 燈交替呼吸亮暗 燈每2秒閃3次 燈常亮 燈常亮 PC and Notebook Tablet Phone MP3 耳機在關機狀態下,將3.5mm 音頻線, 一端連接到設備,一端連接到耳機。 USB充電口 任何未經負責合規性檢查方明確批准的變更或修改行為都將取消使用者操作該設 備的權利。 聯邦通信委員會合規性聲明 依照聯邦通信委員會條款第15部分规定，該設備經測試證實符合B類數碼設備標 準。該限制條款對該設備應用於家用裝置中可能造成的危害性干擾提供了合理的 保護措施。該設備會生成、使用並放射出射頻能量，如果不按照說明手冊上的方 法進行安裝和使用，則可能對無線通訊造成危害性的干擾。但不保證在特殊情況 下沒有干擾。若該設備對收音機、電視之收訊造成有害干擾（可開/關設備之電 源確認），建議使用者以下列一種或多種方式改善干擾狀況： 1.重新調整或安置接收天線。 2.增加該設備與接收裝置間的距離。 3.將該設備連接與該接收裝置不同回路的電源插座。 4.諮詢經銷商或向資深廣播電視技術人員尋求説明。 該設備符合聯邦通信委員會條款第15條規定。其操作需依照以下兩個條件： (1) 該設備不得產生有害干擾。 (2) 該設備必須接收任何其他干擾 包括產生非預期操作之干擾。 警告 該生產廠家將不對任何因未經許可而對該設備進行修改所產生的收音機、電視 干擾負責。該修改行為可能導致該使用者操作本設備的權利被取消。 藍牙立體身耳機 M2 保養證 有限保養 多謝選購MIPOW產品。MIPOW保證：本產品於購買時並無任何材質或製品上的瑕疵。 本產品的有限保養自購買起十二（12）個月內。當需要保養服務時，顧客必須出示保 養證正本和發票正本，否則保養將被作廢。 保養服務只限於產品在正常使用下有效。此有限保養不適用於因人為疏忽、粗魯的操 作、不正確的使用、意外事故、暴露於濕氣之下、潮濕或過度高溫、未經授權的修正、 未經授權的開啟或修復、不可抗力；或其他MIPOW無法合理控制的行為所造成的損壞 或損失。如損壞未能合乎本保養條例，顧客將被收取維修或更換零件的費用。顧客必 須自行將有瑕疵的產品交到客戶服務中心，並自行取回已修復或更換的本產品。 注：MIPOW擁有任何對本人所述的條件和條件之最終裁決權，及有權隨時對條款和條 件作出更改，而無需另行通知。 DC 產品型號： BTX200 通話時間： 15小時 待機時間： 25天 充電時間： 1.5-2小時 無線傳輸距離：10米(33英尺) 藍牙: 藍牙4.0 重量: 190克 尺寸: 185(L)x175(W) x30(T)mm 撥 動 開 關 撥 至 ON位 置 開 機 ， 藍 燈 常 亮 2秒 ， 開 機 提 示 音 ， 如藍牙連接過手機，開機會 自動重連最後一次連接的手機。 暫停/播放 電池狀態指示： 3.5mm耳機插頭 1.電 池電壓小於3.3v大於3.0v時低壓報警, 耳機開關鍵 on off 藍牙配對 開啟藍牙 M2 藍牙立體聲耳機 [CN] 產品配件 白燈快閃並有語音提示。 2.電 池電壓小於3.0v時自動關機。 45 67 8 9 10 11 12 物料名称 说明书（英+繁） 物料编码 DAVINCI 200-SMS-010B 日期 2014.2.15 材质 80g双铜纸 工艺 制作 陈新民 品质 研发(销售) 批准 型号 版本号 DAVINCI 200 V1.1 备注
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No Profile CMM Type : Lino Profile Version : 2.1.0 Profile Class : Display Device Profile Color Space Data : RGB Profile Connection Space : XYZ Profile Date Time : 1998:02:09 06:49:00 Profile File Signature : acsp Primary Platform : Microsoft Corporation CMM Flags : Not Embedded, Independent Device Manufacturer : IEC Device Model : sRGB Device Attributes : Reflective, Glossy, Positive, Color Rendering Intent : Perceptual Connection Space Illuminant : 0.9642 1 0.82491 Profile Creator : HP Profile ID : 0 Profile Copyright : Copyright (c) 1998 Hewlett-Packard Company Profile Description : sRGB IEC61966-2.1 Media White Point : 0.95045 1 1.08905 Media Black Point : 0 0 0 Red Matrix Column : 0.43607 0.22249 0.01392 Green Matrix Column : 0.38515 0.71687 0.09708 Blue Matrix Column : 0.14307 0.06061 0.7141 Device Mfg Desc : IEC http://www.iec.ch Device Model Desc : IEC 61966-2.1 Default RGB colour space - sRGB Viewing Cond Desc : Reference Viewing Condition in IEC61966-2.1 Viewing Cond Illuminant : 19.6445 20.3718 16.8089 Viewing Cond Surround : 3.92889 4.07439 3.36179 Viewing Cond Illuminant Type : D50 Luminance : 76.03647 80 87.12462 Measurement Observer : CIE 1931 Measurement Backing : 0 0 0 Measurement Geometry : Unknown Measurement Flare : 0.999% Measurement Illuminant : D65 Technology : Cathode Ray Tube Display Red Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Green Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Blue Tone Reproduction Curve : (Binary data 2060 bytes, use -b option to extract) Page Count : 2 Create Date : 2014:03:25 16:37:02+08:00 Modify Date : 2014:03:25 16:37:02+08:00 Producer : Corel PDF Engine Version 16.0.0.707 Author : YangFun Creator : CorelDRAW X5 Title : 未命名 -1EXIF Metadata provided by EXIF.tools