Barco N V R9861500D01 ClickShare Button User Manual 3

Download:
Mirror Download [FCC.gov]
Document ID	2793049
Application ID	HKl5ezCeGVVBlWMiI4j8hg==
Document Description	User manual_3
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	67.07kB (838403 bits)
Date Submitted	2015-10-26 00:00:00
Date Available	2015-10-27 00:00:00
Creation Date	2015-10-20 10:18:13
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2015-10-20 10:18:13
Document Title	Print Preview - C:\Temp\.aptcache\ae7u04b2/tf7u068i
Document Creator	PScript5.dll Version 5.2.2
Document Author:	G_KUU_TELIMA

ClickShare
Safety Guide
R5900005/06
20/10/2015
Barco NV
President Kennedypark 35, 8500 Kortrijk, Belgium
Phone: +32 56.23.32.11
Fax: +32 56.26.22.62
Support: www.barco.com/en/support
Visit us at the web: www.barco.com
Printed in China
1. Safety
1. SAFETY
About this chapter
Read this chapter attentively, it contains important information to prevent personal injury while using ClickShare. It also includes
several cautions to prevent damage to the ClickShare product. Ensure that you understand and follow all safety guidelines, safety
instructions and warnings in this chapter before using your ClickShare.
Covered ClickShare products and ClickShare Link
Regional version
R9861005EU
R9861005JP
R9861005CN
R9861005NA
R9861005WW
Contains
Accessories included
•
R9861006BEU
•
power cables CEE7 and BS 1363
•
4x R9861006D01
•
wall/ceiling mounting brackets
•
R9861006T01
•
a DVI to VGA converter
•
R9861006BJP
•
power cable JIS C8303
•
4x R9861006D01
•
wall/ceiling mounting brackets
•
R9861006T01
•
a DVI to VGA converter
•
R9861006BCN
•
power cable GB 2099
•
4x R9861006D01
•
wall/ceiling mounting brackets
•
R9861006T01
•
a DVI to VGA converter
•
R9861006BNA
•
power cable NEMA 5/15
•
4x R9861006D01
•
wall/ceiling mounting brackets
•
R9861006T01
•
a DVI to VGA converter
•
R9861006BEU
•
power cables CEE7 and BS 1363
•
4x R9861006D01
•
wall/ceiling mounting brackets
•
R9861006T01
•
a DVI to VGA converter
Contact your local sales representative for the correct regional variant necessary in your environment.
Optional equipment:
R9861001
•
ClickShare Link
•
USBA to USBmini cable
•
HDMI to DVI convertor
•
Power supply
•
AC clips type A, C, G, I
About this guide
Part number
Description
Level
R5900005
Safety Guide
Any person that comes in contact with the
ClickShare product
Always check for the latest version of the manual on www.barco.com/clickshare Click on Visit the ClickShare
product page and go to tab Downloads..
List of available ClickShare documents
The ClickShare documentation consists of the following manuals:
Guide
Article number
User Guide
R5900001
Quick Start Guide
R5900002
Installation Guide
R5900004
Safety Guide (this manual)
R5900005
R5900005 CLICKSHARE 20/10/2015
1. Safety
Article number
Guide
Service Guide
R5900006 (Only available to Customer Service partners)
Button Guide
R5900007
Rack Mount Guide
R5900008
Recycling Manual
R5900009 (Available upon request)
A printed copy of the Safety Guide and Quick Start Guide is included in the ClickShare box at purchase. Please
check online for the other documents.
1.1
General safety
Safety warnings
The installation of the device must comply with the guidelines in the ClickShare Installation Guide (R5900004).
•
To prevent injuries and physical damage, always read this manual and all labels on the system before connecting to the wall
outlet.
•
The apparatus must be grounded (earthed) via the supplied power cable. If the supplied power cable is not the correct one,
consult your dealer.
•
The ClickShare product is intended to be used in office and indoor environments only.
•
Only use the power cord supplied with your device. While appearing to be similar, other power cords have not been safety
tested at the factory and may not be used to power the device. For a replacement power cord, contact your dealer.
•
This product should be operated from an AC power source. Power input is auto-ranging from 100 V to 240 V.
•
All equipment in the system is equipped with a 3-wire grounding plug, a plug having a third (grounding) pin. This plug will only
fit into a grounding-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the purpose of the grounding- type plug.
•
Do not allow anything to rest on the power cord. Do not locate this product where persons will walk on the cord. To disconnect
the cord, pull it out by the plug. Never pull the cord itself.
•
If an extension cord is used with this product, make sure that the total of the Ampere ratings on the products plugged into the
extension cord does not exceed the extension cord Ampere rating.
•
Never spill liquid of any kind on the product. Should any liquid or solid object fall into the cabinet, unplug the set and have it
checked by qualified service personnel before resuming operations.
•
Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet. This will prevent damage to the device due to lightning and AC power-line surges.
•
Only use attachments/accessories specified by the manufacturer.
Battery caution
CAUTION: Risk of explosion when the battery is replaced by an incorrect type. Dispose of used batteries according to the waste
instructions.
ATTENTION : Risque d’explosion en cas d’usage d’une batterie non prévue pour cet appareil. Jetez les batteries usagées suivant
les règles de recyclage prévues.
WARNING: Ensure you understand and follow all safety guidelines, safety instructions, warnings and cautions mentioned in the product documentation.
WARNING:
The mains power plug connected to the wall outlet must be easily accessible at all times for all
installation modes.
Environment
Do not place this equipment on an unstable cart, stand, or table. The product may fall, causing serious damage to it.
R5900005 CLICKSHARE 20/10/2015
1. Safety
1.2
Service
Risk of electric shock
Do not open. To reduce the risk of electric shock, do not remove the cover. No user- serviceable parts inside. Refer all servicing to
qualified service personnel.
Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
1.3
•
When the power cord or plug is damaged or frayed.
•
If liquid has been spilled into the equipment.
•
If the product has been exposed to rain or water.
•
If the product does not operate normally when the operating instructions are followed. Adjust only those controls that are
covered by the operating instructions since improper adjustment of the other controls may result in damage and will often
require extensive work by a qualified technician to restore the product to normal operation.
•
If the product has been dropped or the cabinet has been damaged.
•
If the product exhibits a distinct change in performance, indicating a need for service.
•
Replacement parts: When replacement parts are required, be sure the service technician has used original BARCO replacement parts or authorized replacement parts which have the same characteristics as the BARCO original part. Unauthorized
substitutions may result in degraded performance and reliability, fire, electric shock or other hazards. Unauthorized substitutions may void warranty.
•
Safety check: Upon completion of any service or repairs to this device, ask the service technician to perform safety checks to
determine that the product is in proper operating condition.
Heat and fire hazard
Heat and Fire Hazard
Warning – risk of fire: do not place flammable or combustible materials near the device!
Barco products are designed and manufactured to meet the most stringent safety regulations.
This device radiates heat on its external surfaces and from ventilation ducts during normal operation, which is both normal and
safe. Exposing flammable or combustible materials into close proximity of this device could result in the spontaneous ignition of that
material, resulting in a fire. For this reason, it is absolutely necessary to leave an “exclusion zone” around all external surfaces of
the device where no flammable or combustible materials are present. The exclusion zone must be not less than 40 cm (16”) for all
Barco devices. Do not cover the device with any material while the it is in operation.
Mount the device in a well ventilated area away from sources of ignition and out of direct sun light.
In the event of fire, use sand, CO2, or dry powder fire extinguishers; never use water on an electrical fire.
Slots and openings in the cabinet and the sides are provided for ventilation; to ensure reliable operation of the device and to protect
it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface. Loose papers or other objects may not be nearer to the device than 10 cm (or 4") on
any side.
1.4
Environmental Condition Check
Environment condition check
A device must always be mounted in a manner which ensures both air inlets and outlets are free. For installations in environments
where the device is subject to excessive dust, then it is highly advisable and desirable to have this dust removed prior to it reaching
the device clean air supply. Devices or structures to extract or shield excessive dust well away from the device are a prerequisite; if
this is not a feasible solution then measures to relocate the device to a clean air environment should be considered.
It is the customer’s responsibility to ensure at all times that the device is protected from the harmful effects of hostile airborne particles
in the environment of the device. The manufacturer reserves the right to refuse repair if a device has been subject to negligence,
abandon or improper use.
Ambient temperature conditions
Max. ambient temperature : +40°C or 104°F
Min. ambient temperature: +5°C or 41°F
Storage temperature: -20°C to +60°C (–4°F to 140°F)
Humidity Conditions
Storage: 0 to 90% relative humidity, non-condensing
Operation: 0 to 85% relative humidity, non-condensing
R5900005 CLICKSHARE 20/10/2015
1. Safety
Environment
The ClickShare product is intended to be used in office and indoor environments only.
Do not install the device in a site near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive
dust or humidity. Be aware that room heat rises to the ceiling; check that temperature near the installation site is not excessive.
1.5
Plug types ClickShare
AC Power cord with NEMA 5/15 plug up to 15 A
NEMA 5/15
The wires of the power cord are colored in accordance with the following code:
Green or yellow + green: Earth (Ground)
Blue or white: Neutral
Brown or black: Line (Live)
AC Power cord with BS 1363 plug up to 13 A
Bs 1363
The wires of the mains lead are colored in accordance with the following code:
Green + yellow: Earth (Ground)
Blue: Neutral
Brown: Line (Live)
Make sure you use the correct fuse rating for the appliance.
Power cord with GB 2099 plug
The wires of the mains lead are colored in accordance with the following code:
Green + yellow: Earth (Ground)
Blue: Neutral
Brown: Line (Live)
AC Power cord (mains lead) with CEE 7 plug up to 16 A
CEE 7
The wires of the mains lead are colored in accordance with the following code:
Green + yellow: Earth (Ground)
Blue: Neutral
Brown: Line (Live)
R5900005 CLICKSHARE 20/10/2015
1. Safety
AC Power cord with JIS C8303 plug up to 7 A
The wires of the power cord are colored in accordance with the following code:
Green or yellow + green: Earth (Ground)
Blue or white: Neutral
Brown or black: Line (Live)
1.6
Adapter types ClickShare Link
Power input AC clip
Image 1-1
Type A
1.7
Image 1-2
Type C
Image 1-3
Type G
Image 1-4
Type I
Compliance FCC
Federal Communication Commission Interference Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s
authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in
a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his
own expense.
If this equipment does cause interference with radio communications services, which can be determined by turning the equipment
off and on, you are encouraged to try to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
this device may not cause harmful interference, and
2.
this device must accept any interference received, including interference that may cause undesired operation of the device.
FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a devices operating in the
frequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile
Satellite Services (MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode (5 .15
- 5.25 GHz band) are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your
WIFI use indoors to not violate federal regulations to protect Mobile Satellite Services.
Base Unit FFC ID: RYK-WPEA-121N
Button FCC ID (model R9861006D01): XF6-RS9110N1103
Button FCC ID (model R9861500D01): 2AAED-R9861500D01
ClickShare Button R9861500D01 has been tested and meets the FCC RF exposure guidelines. The maximum SAR value reported
is 0.915W/kg.
R5900005 CLICKSHARE 20/10/2015
1. Safety
1.8
EN55022-CISPR22 Class A ITE (Information Technology Equipment)
Statement
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. Such equipment should
not be restricted in its sale but the following warning shall be included in the instructions for use:
Warning : This is a class A product. In a domestic environment this product may cause radio interference in which case the user
may be required to take adequate measures.
1.9
International Safety Standards
Standards overview
This equipment is built in accordance with the requirements of the international safety standards IEC60950-1, EN60950-1,
UL60950-1 and CAN/CSA C22.2 No.60950-1, which are the safety standards of information technology equipment including
electrical business equipment. These safety standards impose important requirements on the use of safety critical components,
materials and insulation, in order to protect the user or operator against risk of electric shock and energy hazard and having access
to live parts. Safety standards also impose limits to the internal and external temperature rises, radiation levels, mechanical stability
and strength, enclosure construction and protection against the risk of fire. Simulated single fault condition testing ensures the
safety of the equipment to the user even when the equipment’s normal operation fails.
1.10 Compliance IC
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The
Barco Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Base Unit IC ID: IC: 4104 A-AR5BHB116
IC ID Button (model R9861006D01): 8407A-RS9110N1103
IC ID Button (model R9861500D01): 9393B-R9861500D01
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser)
gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and
its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful
communication.
This radio transmitter 4104 A-AR5BHB116 has been approved by Industry Canada to operate with the antenna types listed below
with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included
in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
Type: Dipole
Maximum Peak Gain: 2 dBi
Impedance: 50 Ohm
R5900005 CLICKSHARE 20/10/2015
1. Safety
1.11 TRA Approval United Arab Emirates
TRA approval
Base
Button
TRA
TRA
REGISTERED No:
ER0116291/13
DEALER No:
0015331/08
REGISTERED No:
ER0116289/13
DEALER No:
0015331/08
Image 1-5
1.12 CE Certification
CE Certificate
R9861005EU is fit for use in all European Union countries, Norway and Switzerland.
Image 1-6
The CE certificate can be found on the following page.
R5900005 CLICKSHARE 20/10/2015
1. Safety
Image 1-7
R5900005 CLICKSHARE 20/10/2015

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Copy, Extract, Print high-res
XMP Toolkit                     : 3.1-701
Producer                        : Acrobat Distiller 7.0 (Windows)
Create Date                     : 2015:10:20 10:18:13+02:00
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2015:10:20 10:18:13+02:00
Format                          : application/pdf
Creator                         : G_KUU_TELIMA
Title                           : Print Preview - C:\Temp\.aptcache\ae7u04b2/tf7u068i
Document ID                     : uuid:9b1ebd31-0721-49b0-9fcf-92a180fa46cb
Instance ID                     : uuid:58a69be7-c10c-46c7-863c-a647ea20a4ab
Page Count                      : 10
Author                          : G_KUU_TELIMA

EXIF Metadata provided by EXIF.tools