Barco N V R9861500D01 ClickShare Button User Manual 1

Barco NV ClickShare Button 1

User manual_1

ClickShareUser GuideR5900001/0820/10/2015
Barco NVPresident Kennedypark 35, 8500 Kortrijk, BelgiumPhone: +32 56.23.32.11Fax: +32 56.26.22.62Support: www.barco.com/en/supportVisit us at the web: www.barco.comPrinted in China
ChangesBarco provides this manual ’as is’ without warranty of any kind, either expressed or implied, including but not limited to the implied war-ranties or merchantability and fitness for a particular purpose. Barco may make improvements and/or changes to the product(s) and/or theprogram(s) described in this publication at any time without notice.This publication could contain technical inaccuracies or typographical errors. Changes are periodically made to the information in thispublication; these changes are incorporated in new editions of this publication.The latest edition of Barco manuals can be downloaded from the Barco web site www.barco.com or from the secured Barco web sitehttps://www.barco.com/en/signin.Copyright ©All rights reserved. No part of this document may be copied, reproduced or translated. It shall not otherwise be recorded, transmitted orstored in a retrieval system without the prior written consent of Barco.Barco ClickShare End-User License Agreement (EULA/Software License)PLEASE READ THIS DOCUMENT CAREFULLY BEFORE OPENING OR DOWNLOADING AND USING SOFTWARE OR HARDWAREPROVIDED TO YOU BY BARCO AS IT CONTAINS THE TERMS AND CONDITIONS BY WHICH BARCO OFFERS TO LICENSE THESOFTWARE. BY OPENING THE SOFTWARE PACKAGE, OR USING THE HARDWARE IN WHICH THE SOFTWARE IS EMBEDDED,YOU AGREE TO BECOME BOUND BY THE TERMS OF THIS AGREEMENT.The Software as supplied by BARCO is licensed, not sold to you, on a non-exclusive basis for use only under the terms of this license,and BARCO reserve all rights not expressly granted to you. You may own the carrier on which the Software is provided, but the Softwareis owned and copyrighted by BARCO or by third party suppliers. Your license confers no title or ownership and is not a sale of any rightsin the Software or its documentation.By installing, executing and/or using the Software, either as initial version or as an upgrade, update, patch or enhancement of a priorrelease, this Software License shall supersede any terms and conditions previously agreed upon (whether or not in writing) between Barcoand you with respect to the subject matter of this Software License and such previous terms shall from the date hereof cease to have anyforce or effect; provided, however that this Software License shall not be construed as a renunciation, discharge or waiver of any right orremedy provided in any terms and conditions previously agreed upon with respect to a failure of either party to perform any of its obligationsunder any terms and conditions previously agreed upon.Software SpecificationsThe Software contains the following software products: ClickShareSoftware License Terms1. This Software License is between you and BARCO NV, a corporation organized and existing under the laws of Belgium registeredunder number BE 0473.191.041, Commercial Companies’ Register of Kortrijk, having its registered office President Kennedypark, 35at B-8500 Kortrijk, Belgium ("Barco") for the use of the Software.You hereby undertake to inform all users authorized by you to make use of the computing device on which the Software is loaded/in-stalled (“Authorized Users”) of the terms of this Software License and to bind all Authorized Users to accept all such terms of thisSoftware License as applies to them.2. Barco grants you a limited, non-exclusive, non-assignable, non-transferable user license (without the right to grant sublicenses).Unless specifically agreed upon otherwise between you and Barco or unless specifically allowed by the Software (or its DRM man-agement) itself, i) the license under this Software License applies to one (1) copy of the Software to be used on one single computingdevice and ii) installation on a computing device that may be concurrently accessed by more than one user shall not constitute apermitted use and a separate license is required for each active user connected to a computing device on which the Software is beingused.You and Authorized Users are entitled to use the Software for the purposes and in the manner set out in this Software License (anddocumentation), but neither you nor any Authorized User are entitled to: (i) sell or grant a security interest in the Software to otherparties in any way, or to rent, lease or sub-license the Software to others without the express prior written consent of Barco; or (ii)exploit the Software or any of its component parts for any commercial purpose, other than use by you and/or Authorized Users of theSoftware.Neither you nor any Authorized User may, whether in whole or in part, copy, translate, reverse engineer, derive source code from,modify, disassemble, decompile, create derivative works based on the Software, or remove any proprietary notices or labels on theSoftware, save as may be permitted by law or this Software License, without the prior consent, in writing, of Barco.3. Barco (and Barco’s licensors, as appropriate) retain ownership of all intellectual property rights in the Software and any copies youor any Authorized User may make of such Software. The Software is protected by national copyright laws, international copyrighttreaties and conventions, and other applicable laws. All rights not expressly licensed to you in this Software License are reservedto Barco and Barco’s licensors, as appropriate. The Software contains certain other licensed materials and Barco’s licensors mayprotect their rights in the event of any violation of this Software License.
4. Barco shall hold you harmless, defend and indemnify you from and against direct damages, losses and expenses arising from in-fringement or alleged infringement of any patent, trademark or copyright of such third party by the license and the right to install theSoftware as permitted by this Software License and settle at its sole expense any amounts awarded in a final judgment or settlementresulting therefrom, under the condition that (i) you promptly notify Barco in writing after a claim has been asserted against you orthe commencement of any claim, action, suit or proceeding (whichever is the earlier), and (ii) Barco shall be allowed to assume solecontrol of the defense and any settlement negotiations related to any claim, action, suit or proceeding, and (iii) you shall not negotiate,settle or compromise any claim, action, suit or proceeding without the prior written consent of Barco and (iv) you, at your cost, shallcooperate with Barco and provide assistance and support, as may reasonably be required by Barco, in connection with the defenseand any settlement negotiations related to any claim, action, suit or proceeding. Barco shall have no indemnity obligation for anySoftware, or any portion thereof, (i) that is based on specifications, drawings, models or other data furnished by you or, (ii) that isnot provided by Barco or, (iii) that is modified, in spite of the prohibition for you to modify the software or, (iv) to the extent that youcontinue allegedly infringing activity after having been provided modifications that avoid the alleged infringement, or (v) where the useof the Software, or the combination or thereof with other Software, processes or materials or the distribution thereof rather than theSoftware itself is the primary cause of an alleged infringement. In case it has been determined by a finally awarded judgment thatBarco infringed or misappropriated such third party rights or earlier, at Barco’s discretion, it may, at its option and cost, (i) modify theSoftware in such a way that it shall not infringe upon or misappropriate the rights of the third party or (ii) obtain for you a license orother right to use the rights allegedly infringed or (iii) replace the Software in question with non-infringing Software. The remedies setforth in this paragraph shall constitute your sole and exclusive remedy and Barco’s sole and exclusive liability for a third party claimthat the Software infringes or misappropriates any intellectual property right of a third party.5. The duration of this Software License will be from the date of your acceptance (as set forth above) of the Software (whereby you ac-knowledge that use of the Software implies acceptance), with no termination date, unless otherwise specified. You may terminate thisSoftware License at any time by destroying all copies of the Software then in your possession and returning all associated materialsand documentation, to Barco or the appointed Barco reseller that sold or provided these to you. Barco may terminate this SoftwareLicense forthwith by informing you at any time if you and/or any Authorized User are in breach of any of the Software License’s terms.6. YOU UNDERSTAND THAT THE SOFTWARE IS BEING PROVIDED TO YOU "AS IS". BARCO DOES NOT MAKE NOR INTENDSTO MAKE ANY WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED AND SPECIFICALLY DISCLAIMS ALL IMPLIEDWARRANTIES OF MERCHANTABILITY FITNESS, FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF INTELLEC-TUAL PROPERTY AND DOES NOT WARRANT THAT THE SOFTWARE WILL BE FREE FROM ERRORS OR THAT SUCH ERRORSWILL BE CORRECTED BY BARCO AND YOU ARE SOLELY RESPONSIBLE FOR ALL COSTS AND EXPENSES ASSOCIATEDWITH RECTIFICATION, REPAIR OR DAMAGE CAUSED BY SUCH ERRORS.YOU ALSO ACKNOWLEDGE AND AGREE THAT:BARCO ACCEPTS NO LIABILITY FOR ANY DAMAGES, LOSSES OR CLAIMS YOU OR ANY THIRD PARTY MAY SUFFER ASA RESULT OF YOUR USE OF THE SOFTWARE. IN JURISIDCTIONS WHERE BARCO’S LIABILITY CANNOT BE EXCLUDED,BARCO’S LIABILITY FOR DIRECT DAMAGES SHALL BE LIMITED TO AN AMOUNT OF 250 EURO IN THE AGREGATE (OR TOTHE MAXIMUM EXTENT PERMITTED BY LAW WHERE NO FURTHER EXCLUSION IS LEGALLY ALLOWED).TO THE MAXIMUM EXTENT PERMITTED BY LAW, IN NO EVENT WILL BARCO BE LIABLE FOR ANY INDIRECT, SPECIAL,PUNITIVE, INCIDENTAL OR CONSEQUENTIAL LOSS OR DAMAGES OF ANY KIND WHICH MAY ARISE OUT OF OR IN CON-NECTION WITH THE SOFTWARE, THIS SOFTWARE LICENSE OR THE PERFORMANCE OR PURPORTED PERFORMANCEOF OR FAILURE IN THE PERFORMANCE OF BARCO’S OBLIGATIONS UNDER THIS SOFTWARE LICENSE OR FOR ANY ECO-NOMIC LOSS, LOSS OF BUSINESS, CONTRACTS, DATA, GOODWILL, PROFITS, TURNOVER, REVENUE, REPUTATION ORANY LOSS ARISING FROM WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION OF THE SOFTWARE AND ANY ANDALL OTHER COMMERCIAL DAMAGES OR LOSSES WHICH MAY ARISE IN RESPECT OF USE OF THE SOFTWARE, EVEN IFBARCO HAS BEEN ADVISED OF THE POSSIBILITY OF THEIR OCCURRENCE.YOU HEREBY AGREE TO INDEMNIFY, KEEP INDEMNIFIED, DEFEND AND HOLD HARMLESS BARCO AND BARCO’S AFFILI-ATES AND SUBSIDIARIES FROM AND AGAINST ANY AND ALL ACTIONS, PROCEEDINGS, LIABILITY, LOSS, DAMAGES, FEESAND COSTS (INCLUDING ATTORNEYS" FEES), AND OTHER EXPENSES INCURRED OR SUFFERED BY BARCO ARISING OUTOF OR IN CONNECTION WITH ANY BREACH BY YOU OF THE TERMS OF THIS SOFTWARE LICENSE.7. You shall treat as confidential all information obtained from the other pursuant to this Software License which is marked "confidential"or the equivalent or has the necessary quality of confidence about it and shall not divulge such information to any persons withoutBarco’s prior written consent provided that this Paragraph 7 shall not extend to information which was rightfully in the possession ofyou prior to the commencement of the negotiations leading to this Software License, which is already public knowledge or becomesso at a future date (otherwise than as a result of a breach of this paragraph 7), is required to be disclosed by law or which is trivial orobvious. You are aware of and ensure to comply with the provisions of this paragraph 7. The foregoing obligations as to confidentialityshall survive any termination of this Software License.8. You will remain responsible for the maintenance of your hardware, operating system, the functioning of your network and in keepingyour systems virus-free. You acknowledge that the Software is a complex computer software application, and that the performancethereof may vary depending hardware platform, software interactions and configuration. You acknowledge that the Software is notdesigned and produced specifically to meet your specific requirements and expectations and the selection of the Software by you isentirely your own choice and decision. For the avoidance of doubt, nothing in this Software License shall impose any obligation onBarco to provide support services (on the Software or any other hardware or software product).
9. This Software License is the only understanding and agreement between you and Barco for use of the Software by you and/or Autho-rized Users. The Software License supersedes all other communications, understandings or agreements we had prior to this SoftwareLicense (with the exception of any continuing confidentiality agreement) although nothing in this Software License purports to excludeliability for fraudulent misrepresentation. You may not export or re-export the Software or any copy or adaptation in violation of anyapplicable laws or regulations. This Software License shall not be altered, amended or varied. If any provision of this Software Li-cense is determined to be illegal, void or unenforceable, or if any court of competent jurisdiction in any final decision so determines,this Software License shall continue in full force save that such provision shall be deemed to be deleted with effect from the date ofsuch decision, or such earlier date, and shall be replaced by a provision which is acceptable by law and which embodies the intentionof this Software License a close as possible.10. You acknowledge that this Software may be subject to U.S. or other governments Export Jurisdiction. You agree to comply with allapplicable international and national laws that apply to the Software, including the U.S. Export Administration Regulations, as well asend-user, end-use, and destination restrictions issued by the U.S. or other governments.11. Barco shall be entitled to sub-contract all or any of Barco’s obligations hereunder to a third party and/or any of Barco’s affiliatedcompanies.12. The construction, validity and performance of this Software License shall be governed in all respects by the laws of Belgium withoutrecourse to its conflict of law principles. All disputes arising in any way out of or affecting this Software License shall be subjectto the exclusive jurisdiction of the courts of Kortrijk, without prejudice to enforcement of any judgment or order thereof in any otherjurisdiction. The United Nations Convention on Contracts for the International Sale of Goods (the "Convention") shall not apply to thisSoftware License, however, if the Convention is deemed by a court of competent jurisdiction to apply to this Software License, Barcoshall not be liable for any claimed non-conformance of the Software under Article 35(2) of the Convention.Trademarks Software License TermsBrand and product names mentioned in relation to the Software may be trademarks, registered trademarks or copyrights of their respective(third party) holders. All such brand and product names mentioned in relation to the Software serve as comments or examples and are notto be understood as advertising for the products or their manufacturers.Privacy PolicyYou acknowledge and agree that the Software is gathering technical information about the functionality of the products which are connectedthrough the Software (“Functional Information”) and that Barco may make use of such Functional Information (with the exclusion of anypersonal data) for any reason Barco sees fit, including but not limited to providing services to you / your organization, allowing third partyto access to such Functional Information and/or to provide services to you / your organization .You hereby explicitly give consent that Barco may gather, access, preserve, and/or disclose the personal data you provide to us (e.g.connected with your account allowing for the gathering of Functional Information as well as any content associated with that account) aswell as personal information we receive from you through the use of the Software:• For the benefit of the business purposes of Barco and/or its affiliates;• In order to provide, maintain, protect and/or improve the Software and to develop new software;• For administration of the relationship between you, your organization and Barco and/or its affiliates ;• For any other legitimate purpose (including i) direct marketing purposes from Barco, its affiliates or selected third parties, and ii)allowing third parties to provide services to you related to the Software);• if required to do so by law or in a good faith belief that such access preservation or disclosure is reasonably necessary to:- Satisfy any applicable law, regulation, legal process or enforceable governmental request;- Enforce this Software License, including investigation of potential violations hereof;- Detect, prevent, or otherwise address fraud, security or technical issues (including, without limitation, the filtering of spam);- Protect against imminent harm to the rights, property or safety of Barco, its users or the public as required or permitted by law.Barco shall not process any “sensitive information” whatsoever, including but not limited to medical information.You understand that the technical processing and transmission of or by the Software, including your content, may involve:• Transmissions over various networks;• Changes to conform and adapt to technical requirements of connecting networks, devices and/or services.You hereby explicitly give consent that Barco may export your personal data to any country worldwide, especially to any country whereBarco and/or its affiliates have infrastructure, or where a third party is making available infrastructure to Barco and/or its affiliates, to processpersonal data.Barco fully adheres to the EU Directive 95/46/EC on the protection of individuals with regard to the processing of personal data and thefree movement of such data, as implemented in the local EU member states. In accordance with these regulations, you have a right ofaccess to, and rectification of, your personal data. You may exercise these rights by contacting Barco.Open Source Software provisions:This product contains software components released under an Open Source license. A copy of the source code is available on requestby contacting your Barco customer support representative.
EACH SEPARATE OPEN SOURCE SOFTWARE COMPONENT AND ANY RELATED DOCUMENTATION ARE PROVIDED "AS IS" WITH-OUT EXPRESS OR IMPLIED WARRANTY INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITYAND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL THE COPYRIGHTHOLDER OR ANY OTHER CONTRIBUTORBE LIABLE FOR DIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POS-SIBILITY OF SUCH DAMAGES, HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIA-BILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS OPEN SOURCESOFTWARE. MORE INFORMATION/DETAILS IS TO BE FOUND IN EACH SPECIFIC OPEN SOURCE LICENSE.Copyright on each Open Source Software component belongs to the respective initial copyright holder, each additional contributor and/ortheir respective assignee(s), as may be identified in the respective documentation, source code, README file, or otherwise. You shall notremove or obscure or otherwise alter the respective copyrights.You acknowledge living up to the conditions of each separate Open Source Software license.In the development of the Software, the following Open Source Software components have been used (an updated list may be madeavailable through the (customer section of the) Barco website or other (online) means):Open Source component Open Source Licensealsa-lib http://www.gnu.org/licenses/gpl.htmlhttp://www.gnu.org/licenses/lgpl.htmlalsa-utils http://www.gnu.org/licenses/gpl.htmlhttp://www.gnu.org/licenses/lgpl.htmlalsa-plugins http://www.gnu.org/licenses/gpl.htmlhttp://www.gnu.org/licenses/lgpl.htmlpulseaudio http://www.gnu.org/licenses/lgpl.htmlbusybox http://opensource.org/licenses/GPL-2.0dropbear http://opensource.org/licenses/mit-license.phpfakeroot http://www.gnu.org/licenses/gpl.htmllinux http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlgmp http://www.gnu.org/licenses/lgpl.htmliproute2 http://www.gnu.org/licenses/gpl.htmlkobs-ng http://www.gnu.org/licenses/gpl.htmlrsync (<3.0.0) http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlrsync (>=3.0.0) http://www.gnu.org/licenses/gpl.htmluClibc http://www.gnu.org/licenses/lgpl.htmlwireless_tools http://www.gnu.org/licenses/gpl.htmlwpa_supplicant http://opensource.org/licenses/BSD-3-Clauseimx-bootlets http://www.gnu.org/licenses/gpl.htmlCrypto++ http://www.cryptopp.com/License.txtlibresample http://www.gnu.org/licenses/lgpl.htmllibjpeg-turbo http://opensource.org/licenses/BSD-3-Clause
Open Source component Open Source Licenseacpid http://www.gnu.org/licenses/gpl.htmlavahi http://www.gnu.org/licenses/lgpl.htmlcoreutils http://www.gnu.org/licenses/gpl.htmlcrda http://opensource.org/licenses/ISCcron http://opensource.org/licenses/ISCdbus http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmldhcpd http://opensource.org/licenses/ISCdmidecode http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmle2fsprogs http://www.gnu.org/licenses/old-licenses/lgpl-2.1.htmleglibc http://www.gnu.org/licenses/lgpl.htmlethtool http://www.gnu.org/licenses/gpl.htmlgdbserver http://www.gnu.org/licenses/gpl.htmlgrub http://www.gnu.org/licenses/gpl.htmlgstreamer http://www.gnu.org/licenses/lgpl.htmlhdparm http://opensource.org/licenses/BSD-3-Clausehostapd http://opensource.org/licenses/BSD-3-Clausei2c-tools http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmliftop http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmliperf http://opensource.org/licenses/BSD-3-Clauseiptables http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmliw http://opensource.org/licenses/BSD-3-Clauseacl http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlattr http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmllibarchive http://opensource.org/licenses/bsd-license.phplibav http://www.gnu.org/licenses/old-licenses/lgpl-2.1.htmllibcap2 http://www.gnu.org/licenses/gpl.htmllibdaemon0 http://www.gnu.org/licenses/old-licenses/lgpl-2.1.htmllibdrm2 http://opensource.org/licenses/MIT
Open Source component Open Source Licenselibexpat1 http://opensource.org/licenses/MITlibfontconfig1 http://opensource.org/licenses/BSD-3-Clauselibfontenc1 http://opensource.org/licenses/BSD-3-Clausefreetype http://freetype.sourceforge.net/FTL.TXThttp://www.gnu.org/licenses/old-licenses/gpl-2.0.htmllibgcc1 http://www.gnu.org/licenses/gpl.htmllibgcrypt11 http://www.gnu.org/licenses/gpl.htmlhttp://www.gnu.org/licenses/lgpl.htmlhttp://www.gnu.org/copyleft/fdl.htmllibglib-2 http://www.gnu.org/licenses/old-licenses/lgpl-2.1.htmllibgnutls26 http://www.gnu.org/licenses/lgpl.htmllibgpg-error0 http://www.gnu.org/licenses/gpl.htmlhttp://www.gnu.org/licenses/lgpl.htmlhttp://www.gnu.org/copyleft/fdl.htmllibjpeg8 BSD like licenseelibnl2 http://www.gnu.org/licenses/lgpl.htmllibnss-mdns http://www.gnu.org/licenses/gpl.htmllibpam http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmllibpcap http://opensource.org/licenses/BSD-3-Clauselibpcre0 http://opensource.org/licenses/BSD-3-Clauselibpixman-1-0 http://changelogs.ubuntu.com/changelogs/pool/main/p/pixman/pixman_0.10.0-0ubuntu1/libpixman-1-0.copyrightlibpng12-0 http://www.libpng.org/pub/png/src/libpng-LICENSE.txtlibpopt0 http://opensource.org/licenses/MITlibsm6 http://metadata.ftp-master.debian.org/changelogs//main/libs/libsm/libsm_1.2.2-1_copyrightlibstdc++6 http://www.gnu.org/licenses/gpl.htmllibtalloc2 http://www.gnu.org/licenses/lgpl.htmllibusb http://www.gnu.org/licenses/old-licenses/lgpl-2.1.htmllibxml2 http://opensource.org/licenses/MITlibz1 Free licenselighttpd http://opensource.org/licenses/BSD-3-Clauselmsensors http://www.gnu.org/licenses/gpl.html
Open Source component Open Source Licenselogrotate http://www.gnu.org/licenses/gpl.htmlmakedevs http://www.gnu.org/licenses/gpl.htmlmemtest86plus http://www.gnu.org/licenses/gpl.htmlmesa http://opensource.org/licenses/MITmodule-init-tools http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlmodutils http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlmonit http://www.gnu.org/licenses/gpl.htmlncurses http://opensource.org/licenses/MITnetbase http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlopenssh-sftp-server http://opensource.org/licenses/BSD-3-Clauseopenssl http://www.openssl.org/source/license.htmlopkg http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlpciutils http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlperl http://perldoc.perl.org/perlartistic.htmlhttp://www.gnu.org/licenses/old-licenses/gpl-1.0.htmlphp http://www.php.net/license/3_01.txtprocps http://www.gnu.org/licenses/gpl.htmlqt http://doc.qt.io/qt-5/lgpl.htmlread-edid Free licenserockbox-imxtools http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlrsyslog http://www.gnu.org/licenses/gpl.htmlsplashutils http://www.gnu.org/licenses/gpl.htmlsscep https://github.com/certnanny/sscep/blob/master/COPYRIGHTstrace http://opensource.org/licenses/BSD-3-Clausesysfsutils http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlsysvinit http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmltcpdump http://opensource.org/licenses/BSD-3-Clausettf-arphic-uming http://ftp.gnu.org/non-gnu/chinese-fonts-truetype/LICENSEttf-dejavu-common http://dejavu-fonts.org/wiki/License
Open Source component Open Source Licensettf-dejavu-sans-mono http://dejavu-fonts.org/wiki/Licensettf-dejavu-sans http://dejavu-fonts.org/wiki/Licensettf-sazanami-gothic https://osdn.jp/cvs/view/efont/sazanami/READMEhttp://metadata.ftp-master.debian.org/changelogs//main/t/ttf-sazanami/ttf-sazanami_20040629-8_copyright (translation)ttf-sazanami-mincho https://osdn.jp/cvs/view/efont/sazanami/READMEhttp://metadata.ftp-master.debian.org/changelogs//main/t/ttf-sazanami/ttf-sazanami_20040629-8_copyright (translation)ttf-un-fonts http://www.gnu.org/licenses/gpl.txtudev http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlupdate-modules http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlupdate-rc http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlusbutils http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlutil-linux-ng http://www.gnu.org/licenses/gpl.htmlxserver-xorg http://opensource.org/licenses/MITzeroconf http://www.gnu.org/licenses/gpl.htmlnode.js https://raw.github.com/joyent/node/v0.10.26/LICENSEexpress http://opensource.org/licenses/MITpassport http://opensource.org/licenses/MITpassport-http http://opensource.org/licenses/MITlibXtst http://opensource.org/licenses/MITlibX11 http://opensource.org/licenses/MITlibXfixes http://opensource.org/licenses/MITlibswscale http://www.gnu.org/licenses/old-licenses/lgpl-2.1.htmllibXinerama http://opensource.org/licenses/MITlibXdamage http://opensource.org/licenses/MITlibNotify https://wiki.gnome.org/FoundationBoard/Resources/LicensingAgreementlibXext http://opensource.org/licenses/MITlibavutil http://www.gnu.org/licenses/old-licenses/lgpl-2.1.htmllibXrender http://opensource.org/licenses/MITFFmpeg http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html
Open Source component Open Source Licenselibva Copyright (c) 2011, Advanced Micro Devices, Inc. All rights reserved.xvba-video http://www.gnu.org/licenses/old-licenses/gpl-2.0.htmlTrademarksBrand and product names mentioned in this manual may be trademarks, registered trademarks or copyrights of their respective holders.All brand and product names mentioned in this manual serve as comments or examples and are not to be understood as advertising forthe products or their manufacturers.Guarantee and CompensationBarco provides a guarantee relating to perfect manufacturing as part of the legally stipulated terms of guarantee. On receipt, the purchasermust immediately inspect all delivered goods for damage incurred during transport, as well as for material and manufacturing faults Barcomust be informed immediately in writing of any complaints.The period of guarantee begins on the date of transfer of risks, in the case of special systems and software on the date of commissioning,at latest 30 days after the transfer of risks. In the event of justified notice of complaint, Barco can repair the fault or provide a replacementat its own discretion within an appropriate period. If this measure proves to be impossible or unsuccessful, the purchaser can demand areduction in the purchase price or cancellation of the contract. All other claims, in particular those relating to compensation for direct orindirect damage, and also damage attributed to the operation of software as well as to other services provided by Barco, being a componentof the system or independent service, will be deemed invalid provided the damage is not proven to be attributed to the absence of propertiesguaranteed in writing or due to the intent or gross negligence or part of Barco.If the purchaser or a third party carries out modifications or repairs on goods delivered by Barco, or if the goods are handled incorrectly,in particular if the systems are operated incorrectly or if, after the transfer of risks, the goods are subject to influences not agreed upon inthe contract, all guarantee claims of the purchaser will be rendered invalid. Not included in the guarantee coverage are system failureswhich are attributed to programs or special electronic circuitry provided by the purchaser, e.g. interfaces. Normal wear as well as normalmaintenance are not subject to the guarantee provided by Barco either.The environmental conditions as well as the servicing and maintenance regulations specified in this manual must be complied with by thecustomer.EN55022/CISPR22 Class A ITE (Information Technology Equipment)Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits. Such equipment should notbe restricted in its sale but the following warning shall be included in the instructions for use:Warning : This is a class A product. In a domestic environment this product may cause radio interference in which case the user may berequired to take adequate measures.Federal Communication Commission Interference StatementYou are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’sauthority to operate the equipment.This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercialenvironment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance withthe instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likelyto cause harmful interference in which case the user will be required to correct the interference at his own expense.If this equipment does cause interference with radio communications services, which can be determined by turning the equipment off andon, you are encouraged to try to correct the interference by one or more of the following measures:• Reorient or relocate the receiving antenna.• Increase the separation between the equipment and receiver.• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.• Consult the dealer or an experienced radio/TV technician for help.This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:1. this device may not cause harmful interference, and2. this device must accept any interference received, including interference that may cause undesired operation of the device.FCC RF Radiation Exposure Statement: This device is capable of operating in 802.11a mode. For 802.11a devices operating in thefrequency range of 5.15 - 5.25 GHz, they are restricted for indoor operations to reduce any potential harmful interference for Mobile SatelliteServices (MSS) in the US. WIFI Access Points that are capable of allowing your device to operate in 802.11a mode (5 .15 - 5.25 GHz band)
are optimized for indoor use only. If your WIFI network is capable of operating in this mode, please restrict your WIFI use indoors to notviolate federal regulations to protect Mobile Satellite Services.Base Unit FFC ID: RYK-WPEA-121NButton FCC ID (model R9861006D01): XF6-RS9110N1103Button FCC ID (model R9861500D01): 2AAED-R9861500D01ClickShare Button R9861500D01 has been tested and meets the FCC RF exposure guidelines. The maximum SAR value reported is0.915W/kg.Compliance Anatel (Brasil)1. Este produto está homologado pela Anatel, de acordo com os procedimentos regulamentados pela Resolução nº 242/2000, e atendeaos requisitos técnicos aplicados, incluindo os limites de exposição da taxa de absorção específica referente a campos elétricos,magnéticos e eletromagnéticos de radiofreqüência de acordo com as resoluções nº 303/2002 e 533/2009. Para maiores informações,consulte o site da Anatel - www.anatel.gov.br2. Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estaçõesdo mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.Canada, Industry Canada (IC) NoticesThis device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) thisdevice may not cause interference, and (2) this device must accept any interference, including interference that may cause undesiredoperation of the device.Radio Frequency (RF) Exposure InformationThe radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The BarcoWireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.Base Unit IC ID: IC: 4104 A-AR5BHB116IC ID Button (model R9861006D01): 8407A-RS9110N1103IC ID Button (model R9861500D01): 9393B-R9861500D01IC Antenna statementUnder Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gainapproved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain shouldbe so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.This radio transmitter 4104 A-AR5BHB116 has been approved by Industry Canada to operate with the antenna types listed below withthe maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list,having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.Type: DipoleMaximum Peak Gain: 2 dBiImpedance: 50 OhmCanada, avis d’lndustry Canada (IC)Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation estautorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter toutbrouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.Informations concernant l’exposition aux fréquences radio (RF)La puissance de sortie émise par l’appareil de sans fil Barco est inférieure à la limite d’exposition aux fréquences radio d’Industry Canada(IC). Utilisez l’appareil de sans fil Barco de façon à minimiser les contacts humains lors du fonctionnement normal.IC ID Unité de Base: 4104 A-AR5BHB116IC ID Button (modèle R9861006D01): 8407A-RS9110N1103IC ID Button (modèle R9861500D01): 9393B-R9861500D01
Déclaration d’antenne d’Industrie Canada (IC)Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d’un type et d’un gainmaximal (ou inférieur) approuvé pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectriqueà l’intention des autres utilisateurs, il faut choisir le type d’antenne et son gain de sorte que la puissance isotrope rayonnée équivalente(p.i.r.e.) ne dépasse pas l’intensité nécessaire à l’établissement d’une communication satisfaisante.Le présent émetteur radio 4104 A-AR5BHB116 a été approuvé par Industrie Canada pour fonctionner avec les types d’antenne énumérésci-dessous et ayant un gain admissible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne non inclus danscette liste, ou dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l’exploitation de l’émetteur.Type: DipoleGain maximum: 2 dBiImpédance: 50 Ohm根據NCC低功率電波輻射性電機管理辦法 規定第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。底座 CCAF11LP0930T5按鈕 CCAJ13LP1890T2KCC Statement기본 장치 등록번호 KCC-RMM-BVY-CLICKBASE기자재의 명칭 :무선데이터통신시스템용 무선기기모델명 : CLICKSHARE-BASE본 기기는 내부에 인증 받은 무선모듈(인증번호 : ATH-AR5BHB116)을내장하고있음본 기기와 20 cm 이상 떨어져서 사용하시기 바랍니다버튼 등록번호 KCC-CRM-BVY-CLICKBUTTON기자재의 명칭 :특정소출력 무선기기(무선데이터통신시스템용 무선기기)모델명 : CLICKSHARE-BUTTON사용자안내문A급기기(업무용 방송통신기자재)이기기는업무용(A급)전자파적합기기로서 판매자 또는 사용자는 이 점을 주의하시기 바라며,가정외의 지역에서 사용하는 것을 목적으로 합니다.
Table of contentsTABLE OF CONTENTS1. Introduction ......................................................................................................... 31.1 Versions............................................................................................................................... 31.2 About this guide ...................................................................................................................... 31.3 Symbols and fonts . . .................................................................................................................. 42. Introduction to ClickShare........................................................................................ 52.1 About the ClickShare product ........................................................................................................ 52.2 About the Base Unit .................................................................................................................. 62.3 About the Button...................................................................................................................... 82.4 About the Tray........................................................................................................................ 92.5 Mobile Device Support ............................................................................................................... 93. Getting Started.....................................................................................................113.1 Powering the Base Unit on and off..................................................................................................113.2 Basic Use............................................................................................................................123.3 Advanced Use ....................................................................................................................... 153.4 Use of an iOS device with ClickShare Link......................................................................................... 173.5 Screen mirroring with ClickShare and iOS device..................................................................................183.6 User Interface........................................................................................................................193.7 Capture more........................................................................................................................203.8 Shared desktop: primary - extended................................................................................................213.9 Audio configuration..................................................................................................................233.10 Pairing ............................................................................................................................... 254. Troubleshooting .................. .. .. ...................... .. .. ...................... .. .. .................... .. .. . 294.1 Basic Troubleshooting...............................................................................................................295. Environmental information ......................................................................................315.1 Disposal information.................................................................................................................315.2 Rohs compliance ....................................................................................................................315.3 Production address ..................................................................................................................325.4 Importers contact information .......................................................................................................32Index......................................................................................................................33R5900001 CLICKSHARE 20/10/2015 1
Table of contents2R5900001 CLICKSHARE 20/10/2015
1. Introduction1. INTRODUCTIONOverview• Versions• About this guide• Symbols and fonts1.1 VersionsRegional versionsDepending on the location where you buy the ClickShare product, the Base Unit and accessories are regionalized. By the time ofrelease of this manual, 4 regional versions of ClickShare are available:• Europe• North America• China• JapanThe regional version of your ClickShare cannot be changed. That means that you cannot use it in anotherregion.For more information on the regional variants, refer to the ClickShare Installation Guide (R5900004).1.2 About this guideThis manualPartnumber Description LevelR5900001 User Guide UserAvailable System documentationThis guide is part of the documentation set describing the ClickShare product.Guide Article numberUser Guide R5900001Quick Start Guide R5900002Installation Guide R5900004Safety Guide R5900005Service Guide R5900006Button Guide R5900007Rack Mount Guide R5900008Recycling Manual R5900009API Guide R5900018A printed copy of the Safety Guide and Quick Start Guide is included in the ClickShare box at purchase. Please check online forthe other documents.Always check for the latest version of the manual on www.barco.com/clickshare Click on Visit the ClickShareproduct page and go to tab Downloads..R5900001 CLICKSHARE 20/10/2015 3
1. IntroductionDepending on the ClickShare version, some graphics might be different to the ones used in this manual. Thishowever does not have any effect to the functionality.The User Guide describes how to use ClickShare. It also contains a basic troubleshooting part where you can search for a solutionwhen a problem occurs.1.3 Symbols and fontsSymbol overviewThe following icons are used in the manual :CautionWarningInfo, term definition. General info about the termNote: gives extra information about the described subjectTip: gives extra advice about the described subjectFont overview• Buttons are indicated in bold, e.g. OK.• Menu items are indicated in italic.• Step related notes, tips, warnings or cautions are printed in italic.• Procedure related notes, tips, warnings or cautions are printed in bold between 2 lines preceded by the corresponding icon.4R5900001 CLICKSHARE 20/10/2015
2. Introduction to ClickShare2. INTRODUCTION TO CLICKSHAREOverview• About the ClickShare product• About the Base Unit• About the Button• About the Tray• Mobile Device Support2.1 About the ClickShare productClickShare setsClickShare makes connecting to the meeting room’s video system a matter of clicking a Button. This one click wonder not onlyhelps the presenter get the presentation on-screen in a second, but it also allows the other people in the meeting to participate moreactively. The result is enhanced meeting efficiency and better decision-making.At the moment 4 different sets are available on the market. Each set is sold in its specific region and it can only be used in thatspecific region.Components ClickShare setA standard ClickShare set consists of a Base Unit, a Tray and 4 Buttons. Depending on the location where you buy the product, thesoftware of the Base Unit is different. If needed, you can buy additional Buttons and Trays.1 32Image 2-1ClickShare main components1 Base unit2Button3TrayAccessories includedDepending on the country where you buy the product, the following regionalized accessories are also included in the ClickSharebox.Regional version Contains Accessories includedR9861005EU• R9861006BEU• 4x R9861006D01• R9861006T01• power cables CEE7 and BS 1363• wall/ceiling mounting brackets• a DVI to VGA converterR5900001 CLICKSHARE 20/10/2015 5
2. Introduction to ClickShareRegional version Contains Accessories includedR9861005JP• R9861006BJP• 4x R9861006D01• R9861006T01• power cable JIS C8303• wall/ceiling mounting brackets• a DVI to VGA converterR9861005CN• R9861006BCN• 4x R9861006D01• R9861006T01• power cable GB 2099• wall/ceiling mounting brackets• a DVI to VGA converterR9861005NA• R9861006BNA• 4x R9861006D01• R9861006T01• power cable NEMA 5/15• wall/ceiling mounting brackets• a DVI to VGA converterR9861005WW• R9861006BEU• 4x R9861006D01• R9861006T01• power cables CEE7 and BS 1363• wall/ceiling mounting brackets• a DVI to VGA converterContact your local sales representative for the correct regional variant to be used in your country.Optional accessory: ClickShare LinkOrder number: R9861001Image 2-2ClickShare LinkUsing the optional ClickShare Link allows you to use your iPad with ClickShare.Via a cable or wireless via Apple TV, the complete content of your iPad touchscreen is transferred to the meeting room screenA ClickShare Link kit contains:• 1 ClickShare Link unit• 1 DVI to HDMI convertor• 1 power adapter• 4 power clips• 1 USB cable2.2 About the Base UnitBase Unit functionalityThe Base Unit receives the wireless input from the Buttons and controls the content of the meeting room display and the sound ofthe meeting room’s audio system.The Base Unit can be inside a cabinet in the meeting room, or put on the meeting room table or mounted on a wall or ceiling. Checkthe Installation Guide for instructions on how to install the Base Unit.6R5900001 CLICKSHARE 20/10/2015
2. Introduction to ClickShare2 1 3 2Image 2-3TheBaseUnit1 USB port2 Status LED strip3 Standby ButtonTable 2 - 3USB PortThe USB port is used to update the software of both the Base Unit and the Buttons.When plugging in the Button into the Base Unit, the Button is paired to the Base Unit. The Base Unit checks whether the softwareand firmware of the Button is up to date. If not, the Base Unit updates the software and/or firmware.Status LED stripsThe color of the LEDs at the front of the Base Unit give information on the status of the system.LEDs behavior Explanationstatic red• receiving content from the Buttons and streaming towards the display.• pairing and software update of the Button is done. You can now unplug theButton from the Base Unit.• during the first phase of the Base Unit boot process.blinking white• system is starting up (during the second phase)• Button pairing is in progress• software update of the Base Unitslow blinking white• standby mode (i.e. muting the display output)static white• awake and ready (i.e. showing the welcome message on the display)• pairing is donered blinking• an error occurredStandby buttonThe button at the front of the Base Unit has a power on/off function and a standby function.• When the system is awake, a short push triggers the system to go into standby mode.• When the system is in standby mode, a short push triggers the system to wake up.• When the system is powered on, a long push makes the system to shut down and power off.• When the system is shut down, a long push or short push triggers the system to start up.R5900001 CLICKSHARE 20/10/2015 7
2. Introduction to ClickShare2.3 About the ButtonButton functionalityBy default, the ClickShare Set comes with four Buttons. A Button contains three main functional components.1 2 3Image 2-4The Button1USB connector2Button3LEDringTable 2 - 5Handle the Button cable with care. Rough handling might cause defects.USB connectorUsing the USB connector the Button can be plugged into a laptop (for sharing your screen) or in the Base Unit (for pairing the Buttonto the Unit or updating its software).ButtonClick the Button to display the content of the laptop’s screen on the meeting room display. Clicking the Button during the meetingwill toggle the sharing of the screen.Holding the Button for 2 seconds brings the content of the laptop’s screen as full screen on the meeting screen, removing othersources currently displayed.LED ringThe LED ring indicates the current status of your ClickShare.LEDs behavior Explanationwhite blinking• the Button is plugged in the laptop and initializing or waiting for the userto start the ClickShare application.• pairing/software update of the Button in the Base Unit is in progress.static white• ClickShare is ready to start sharing your screen.• pairing is done. You can now unplug the Button from the Base Unit.static red• sharing your screen with the display.• pairing and software update is done. You can now unplug the Buttonfrom the Base Unit.red blinking• an error occurred.off (no light)• the Button is not or not properly inserted into the USB port.• the Button might be defective.• the USB port or computer might be defective.8R5900001 CLICKSHARE 20/10/2015
2. Introduction to ClickShare2.4 About the TrayTray functionalityThe function of the Tray is to hold the Buttons on the table when the meeting has finished. The Tray can hold up to 5 Buttons.Image 2-5Tray2.5 Mobile Device SupportOverviewThe below list of Apps are supported by ClickShare and can be installed on your mobile device from Google Play or Apple App Store.Before you can use your mobile device with ClickShare, you have to connect the mobile device Wi-Fi with the ClickShare Base UnitWi-Fi. Follow the instructions as given in your mobile device user guide.App Used on LogoClickShare Presenter iOSAndroidMirrorOp Sender for Galaxy Galaxy mobile devicesR5900001 CLICKSHARE 20/10/2015 9
2. Introduction to ClickShare10 R5900001 CLICKSHARE 20/10/2015
3. Getting Started3. GETTING STARTEDOverview• Powering the Base Unit on and off•BasicUse• Advanced Use• Use of an iOS device with ClickShare Link• Screen mirroring with ClickShare and iOS device• User Interface• Capture more• Shared desktop: primary - extended•Audioconfiguration• Pairing3.1 Powering the Base Unit on and offAbout power modeYou can power on and off the Base Unit and bring the system in standby mode. In standby mode the system mutes the output signalto the display. If your display supports this, it will automatically enter power saving mode.To power on the Base Unit or awake it from standby1. When the Base Unit is shut down, set the rocker switch at the back of the Base Unit to “I”.Refer to image 3-1.Image 3-1Rocker switch2. If the system does not start up automatically, push the standby button shortly.Refer to image 3-2.R5900001 CLICKSHARE 20/10/2015 11
3. Getting StartedImage 3-2Standby buttonThe system is now powered on.To put the Base Unit in standby mode or awake it1. Push the standby button shortly.Refer to image 3-2.Note: If you plug in a Button into your laptop and connect to it, the Base Unit automatically wakes up from standby (enable itsdisplay output).If no Buttons have been connected to it for some time, the Base Unit can automatically enter standby mode.To shut down the Base UnitThe Base Unit can be shut down in two ways :1. Push the standby button until the Base Unit shuts down.Refer to image 3-2.2. Set the rocker switch at the back of the Base Unit to “0”.Refer to image 3-1.3.2 Basic UseBasic functionalityWhen entering a meeting room equipped with ClickShare and if the display is not in power saving mode, the ClickShare wallpaperis shown on the display. The content of the wallpaper depends on the setup.12 R5900001 CLICKSHARE 20/10/2015
3. Getting StartedImage 3-3Starting to use ClickShare is now very simple.To start using ClickShare1. Take a Button out of the Tray.Image 3-42. Insert the Button into a USB port of your laptop.R5900001 CLICKSHARE 20/10/2015 13
3. Getting StartedImage 3-5The LEDs of the Button start flashing white.On your laptop a new drive appears.Two situation are possible now:- A launcher is preinstalled on your laptop (downloaded from the Base Unit or Barco website, or deployed company-wide byyour IT department). ClickShare is immediately available. You can continue with step 5.- nothing is pre-installed. Continue with step 3.3. Browse to and double-click the ClickShare drive on your laptop.Image 3-6Windows environmentImage 3-7MAC environment4. Double-click the ClickShare application.14 R5900001 CLICKSHARE 20/10/2015
3. Getting StartedThe ClickShare client software starts and its icon appears in the system tray.On a Windows computer:On a Macintosh:When the system is ready for use, a message appears close to the systray icon.Image 3-8The LEDs of the Button are static white.5. To share your screen on the display, click the Button.The LEDs of the Button become static red and your screen appears on the display. When audio is enabled on the ClickShareBase Unit, the audio of your laptop is also available on the audio output of the Base Unit and it will be played via the meetingroom audio system. The icon return to the same state as in step 4.In the system tray, the ClickShare icon starts rotating. On Windows computers the icon changes into .The name of the user logged on to the laptop which is sharing its content is briefly shown in the bottom left corner of the addedcontent.ClickShare automatically scales the content of your screen to the resolution of the meeting room display. The aspect ratio of yourscreen is maintained to make sure the proportions are correct.6. To remove your content from the display, click the Button again.The LEDs of the Button become static white.7. When leaving the meeting room, unplug the Button from your laptop and put it back in the Tray.No trace of the ClickShare application is left on your laptop.3.3 Advanced UseAdvanced functionalityClickShare can show the content of up to four wireless sources or three wireless sources and one ClickShare Link (for an iPad) onthe meeting room display(s) at the same time. A wireless source is a ClickShare Button, or either an iPad or android device sharingvia the ClickShare app. This means by clicking their Button, clicking the virtual button in the ClickShare app or connecting an iOSdevice through the ClickShare Link, four persons in the meeting room can display their screens simultaneously. They appear asfollows:For a meeting room with a single display:1 user12 users123 users1234 users4123Image 3-9Position on single displayFor a meeting room with a dual display:R5900001 CLICKSHARE 20/10/2015 15
3. Getting Started1 user2 users3 users4 users1131 21212 34Image 3-10Position on Dual screenOne display must support Display Port, otherwise an adapter piece from display port to DVI must be used.For a single display 2560x1600 Panoramic setup4 users panoramic setup2 users panoramic setup1 user panoramic setup21 34121Image 3-11For Panoramic projectors which require Dual Link DVI in, use the Barco kit B5606021 to convert DisplayPort into Dual Link DVI.Image 3-12DisplayPort convertorIf you are the fifth user who wants to share his screen, you are blocked. A message appears on your screen telling you the maximumnumber of users being displayed simultaneously has been reached. You can decide to wait until one of the four users removes hiscontent from the display or you can decide to show your content full screen. In that case, the four screens that were being displayedare removed and your screen is displayed full screen.To show your content on the display full screen1. Click and hold the Button for 2 seconds.16 R5900001 CLICKSHARE 20/10/2015
3. Getting StartedYour content is shown full screen on the display. If other persons were sharing their content on the display, their screens areremoved. Their Button’s LEDs are now shining white again.user 554 users4123Image 3-13Single displayuser 5554 users12 34Image 3-14Dual display21 34 5Image 3-15Panoramic displayWhen you click again, your content is removed and the Base Unit shows the welcome screen again. Thecontent of the previous users is not restored on the display.3.4 Use of an iOS device with ClickShare LinkAbout using an iOS device with ClickShare LinkThe content of the iOS device touchscreen can be displayed on the large meeting room display(s) as one of the possible sources.The optional ClickShare Link must be installed in the meeting room before an iOS device can participate by sharing its screen con-tent. For more information about the physical installation of ClickShare Link in combination with an iOS device, consult ClickShare’sinstallation guide (R5900004)Necessary parts• a ClickShare Link• an HDMI cable• optional: an iOS device HDMI adapter or an Apple TVConnection with cable1. Connect the iOS device HDMI convertor to your iOS device.2. Connect the ClickShare Link to the power and to a rear USB port of the Base Unit.3. Connect the HDMI port of the iOS device to the input of the ClickShare Link.The content of the screen will be displayed on the meeting room screen.R5900001 CLICKSHARE 20/10/2015 17
3. Getting StartedConnection via Apple TVAs per the above but connect the ClickShare Link input to the Apple TV instead of the iOS device.1. Connect to the appropriate network and start sharing by enabling AirPlay mirroring. For more information on how to setup, consultthe iOS device’s user guide.Note: Always use AirPlay mirroring. Streaming is not supported.3.5 Screen mirroring with ClickShare and iOS deviceAbout screen mirroring iOS deviceThe content of iOS device can be display on the central screen by enabling airplay. When starting a video on the wireless device,the airplay protocol will automatically switch from mirroring to streaming.How to setup and activate1. When the base unit is in stand alone mode, connect your wireless device to the base unit wireless network. Enter the password.When the base unit is on a corporate network, connect your wireless device on that network. Make sure the base unit cancommunicate with the wireless device.Image 3-16Connect wireless network2. Enable Airplay on the wireless device. Slide from bottom to up to open the menu and select Airplay.Image 3-17Enable AirplayThe Base Unit appears on the list of available airplay receivers.3. Select the Base Unit.18 R5900001 CLICKSHARE 20/10/2015
3. Getting StartedImage 3-18SelecttheBaseUnit4. Enable Mirroring.Image 3-19Enabling MirroringThe wireless device screen content is displayed on the central display or projector.When starting video on the wireless device, the airplay protocol will automatically switch from mirroring to streaming. This willrender your wireless device screen as black.5. To stop the streaming, go back to the menu, click on Base Unit name and stop Mirroring.Image 3-20Disable Mirroring3.6 User InterfaceUser Interface functionalityAfter launching the client, the ClickShare icon appears in the system tray.R5900001 CLICKSHARE 20/10/2015 19
3. Getting StartedClickShare context menuThe content of the context menu is related to the operating system.1. Right-click the ClickShare icon in the system tray.The context menu appears.Image 3-21Context menu2. From the list, click the action you want to perform.Click To Re sultStart sharing to show your screen on the display. The LEDs of your Button become red.Show me fullscreen to bring the content of your screen onthe display full screen.The screens of other users that wereshown on the display disappear.Capture mode to choose to capture video with more(slower performance) or less detail(faster performance).Tune video performance and qualityShared desktop (only for Windows7 andWindows8)to select primary or extended desktop Depending on the selection the primaryor the extended display is displayed.About ClickShare Client to find out the ClickShare softwareversion.Here you can find more information onthe ClickShare software version.Exit to close ClickShare. The ClickShare icon disappears fromthe system tray and the LEDs of theButton start blinking white.3.7 Capture moreOnly for Windows XP, Windows Vista and Windows 7 & 8.About capture moreClickShare is optimized for optimum video performance. Upon starting the client software it will disable Win7 Aero Glass to maximizevideo performance. Upon quitting the ClickShare applications your Aero Glass settings will be restored.Transparent alpha layers are by default not captured. Therefore some windows may not be shown or may appear different on screen.For example content of video players using overlays will not be shown.With "Capture More" selected, Win7 Aero Glass settings will be restored and capturing of alpha layers is enabled. In this mode,video throughput may decrease a bit and more details will be captured.Default setting: Not checked.How to change1. Right click on the ClickShare icon in the system tray (1).20 R5900001 CLICKSHARE 20/10/2015
3. Getting StartedImage 3-22Change capture modeA context menu opens.2. Click Capture More to toggle.Checked: capture with more details but may have a lower performance.Not checked: capture will be faster but may lose some of the detailsStarting the client automatically in Capture MoreThe Capture more mode can be started by default so that the Aero Glass settings are not disabled. To do so, an environment variableshould be introduced in your windows. Ask you administrator or consult your windows documentation to find out how to create.The following variable should be introduced :Variable ValueCLICKSHARE_CAPTUREMOREBYDEFAULT 13.8 Shared desktop: primary - extendedOnly for Window7 and Windows8About shared desktopDepending on your selection, your primary screen or your extended screen will be captured and displayed via ClickShare. Thatextended screen can be a physical screen or a virtual screen.With extended desktop you can take advantage of both your laptop screen and the central meeting room display. Presentation notesor other material on primary screen will not be displayed to everyone.PC with virtual extended screen:12Image 3-23Primary screen displayed on the PC, extended screen displayed on the meeting room display.R5900001 CLICKSHARE 20/10/2015 21
3. Getting Started2122Image 3-24PC with one extended screen connected. That extended screen will be captured and displayed on the meeting room display.3122Image 3-25PC with two extended screens connected. The first extended screen, screen 2 will always be captured and displayed on the meetingroom display.To know if your system supports the extended desk top feature, press Window key + P. It should bring up thefollowing pop-up on screen:Image 3-26How to select1. Right click on the ClickShare icon in the system tray (1).22 R5900001 CLICKSHARE 20/10/2015
3. Getting StartedImage 3-27Shared desktop selectionA context menu opens.2. Select Shared Desktop (2).3. Select the desired setting (3).Primary : the primary PC screen is displayed on the meeting room display.Extended always the secondary screen is displayed on the meeting room display.Known issue• Virtual Extended Desktop not supported on some Windows7 and Windows8 systems due to a problem in recent versions ofthe AMD graphical driver. Downgrade to an older version of the driver might resolve the issue but make sure the AMD driverupdated above version 13.8 .3.9 Audio configurationAudio configurationThe audio signals from the different users are mixed in the Base Unit to one output signal. Each connected user must control hisown audio signal using the audio configuration of his computer. If he does not want to broadcast his audio signal, he has to muteaudio on his computer.For some operating system, it is necessary to set ClickShare as your default output device. Once you unplug the Button, the defaultsetting is switched back to the previous setting.Set ClickShare as default in Windows 71. Right click on the speaker icon in the system tray (1).R5900001 CLICKSHARE 20/10/2015 23
3. Getting StartedImage 3-28Speakers ClickShare, default2. Click Playback devices (2).The Sound window opens on the Playback tab.3. Select Speakers ClickShare (3) and click Set default (4).4. Click Apply or OK to activate the new setting.Set ClickShare as default in Windows XP1. Right click on the speaker icon in the system tray.Image 3-29Speakers ClickShare, default24 R5900001 CLICKSHARE 20/10/2015
3. Getting Started2. Click Adjust Audio Properties (1).The Sound and Audio Devices Properties window opens.3. Select Audio tab (2).4. Click on the drop down box in the Sound playback pane and select ClickShare (3)..5. Click Apply or OK to activate the new setting.Set ClickShare as default on MAC1. Click on the Apple logo on the menu bar (1) and select System Preferences.. ..(2).Image 3-30Speakers ClickShare, default2. Click on the Speaker icon (3).The Sound window opens.3. Select the Output tab (4) and activate ClickShare (5).3.10 PairingPairing of the Buttons with the Base UnitTo be able to use a Button it should be assigned to the Base Unit you are using. This process is called pairing. By default, the fourButtons delivered with the ClickShare set are already paired to the specific Base Unit.In case you buy additional Buttons or when a Button should be assigned to another Base Unit, the Button needs to be paired (again).When updating the Base Unit software to version 01.06 or higher, the Button software will update automatically over WiFi and doesnot need manual pairing again. The Button software update runs in the background and will not impact users while using the system.R5900001 CLICKSHARE 20/10/2015 25
3. Getting StartedIf desired, this feature can be disabled in the Web Interface. When downgrading or updating to an older version of the Base Unitsoftware the Buttons need to paired manually to update their software.A Button can only be paired to one Base Unit at a time.The Button will always make connection to the Base Unit it was last paired to.To pair a Button to the Base Unit1. Insert the Button in the USB port at the front of the Base Unit you are using.Image 3-31Inserting Button into the Base UnitBoth the LEDs of the Button and the LEDs of the Base Unit are blinking white. This means pairing is in progress.The Base Unit automatically checks whether the software of the Button is up to date. If not, the Base Unit updates the Buttonsoftware. This may take more time.During the pairing and update process, a message is displayed on the screen: “Pairing and updating Button. Busy pairing andupdating”Image 3-32Pairing messageThe result of the pairing process can be as follows:- When the LEDs become static white, the Button is paired to the Base Unit, but no software update was needed. You canunplug the Button from the Base Unit.- When the LEDs become static red, the Button is paired to the Base Unit and the software update has finished. You can unplugthe Button from the Base Unit.Image 3-33Pairing finished2. Unplug the Button from the Base Unit.26 R5900001 CLICKSHARE 20/10/2015
3. Getting StartedImage 3-34Unplug Button from Base UnitThe Button is now ready for use.R5900001 CLICKSHARE 20/10/2015 27
3. Getting Started28 R5900001 CLICKSHARE 20/10/2015
4. Troubleshooting4. TROUBLESHOOTING4.1 Basic TroubleshootingProblem solvingIn this chapter some problems that might occur while using ClickShare are listed. For each problem possible causes are given anda solution is proposed. If you cannot solve the problem yourself, please contact your local IT administrator.Problem Cause SolutionYou are the fifth person that wants toshare his content to the display. Onlyfour screens can appear simultaneously.A message appears on your computer.Click and hold the Button to use the Showme full screen function of ClickShare.Refer to "Advanced Use", page 15.Your screen is not shown on the displaywhen pressing the Button.The ClickShare client software is notrunning.Go to the ClickShare drive and run thesoftware.Your audio signal on your PC is muted Right click on the speaker icon and switchoff the mute.Audio on the Base Unit is disabled. You or an administrator should changethe corresponding setting via the webinterface.Audio system of the meeting room is notswitched onSwitch on the audio system of themeeting room.When using separate audio, audio cableis not connected.Check audio connection between theBase Unit (audio out, green connector)and the audio system of the meetingroom.Default speaker is not correctly set . With a Button inserted, set ClickSharespeaker as your default speaker.Audio Functionality is not enabled in theBase Unit.Enable Audio Functionality in the BaseUnit’s web interface and re-pair thedongles.Your screen is shown, but your audio isnot playing on the meeting room audiosystemButtons are not re-paired after changingthe audio setting on the web interfaceRe-pair the buttons.Your content is removed from the displayand the LEDs of your Button are blinkingwhite.Connection to the display has been lost. ClickShare tries to restore the connectionautomatically. If this fails, the LEDs ofthe Button start blinking red. You shouldunplug the Button from your laptop andstart a new.The display is switched off. Switch on the display.Wrong input is selected. Select the correct input.The display cable is not connected(correctly).(Re)insert the display cable to the displayand the Base Unit.The display does not recognize or isnot able to display the Base Unit outputresolution.You or an administrator should changethe corresponding setting via the webinterface.The Base Unit is in standby mode. Briefly push the standby button on theBase Unit or plug in a Button and run theClickShare client software.The Base Unit is powered off.Nothing is shown on the display at all.The Button’s software is not compatiblewith that of the Base unitRe-pair and update the software of theButton by inserting it in the front USB portof Base Unit.One of the displays is switched off Switch on the display.Two laptops connected with the BaseUnit in a dual display meeting room butonly one shows an image One display cable is not connected (Re)insert the display cable to the displayand the Base Unit.R5900001 CLICKSHARE 20/10/2015 29
4. TroubleshootingProblem Cause SolutionNo automatic refresh of drives. Refresh the view on your laptop.Bad connection at USB port on laptop.• Reconnect to the USB port.• Try another USB port.• Reboot your laptop.After inserting the Button into your laptop,you cannot find the ClickShare drive.Windows tries to assign the ClickSharedrive to an already reserved drive letterUse Microsoft Windows DiskManagement to assign it to a freedrive letter.Some programs of Windows are notshown on the display.Use of overlays, 3D or hardwareacceleration in the GPU. • Disable overlays or hardwareacceleration in the GPU.• Disable AeroGlass in Windows 7• Capture mode30 R5900001 CLICKSHARE 20/10/2015
5. Environmental information5. ENVIRONMENTAL INFORMATION5.1 Disposal informationDisposal InformationWaste Electrical and Electronic EquipmentThis symbol on the product indicates that, under the European Directive 2012/19/EU governing waste from electrical andelectronic equipment, this product must not be disposed of with other municipal waste. Please dispose of your waste equipment byhanding it over to a designated collection point for the recycling of waste electrical and electronic equipment. To prevent possibleharm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of wasteand recycle them responsibly to promote the sustainable reuse of material resources.For more information about recycling of this product, please contact your local city office or your municipal waste disposal service.For details, please visit the Barco website at: http://www.barco.com/en/AboutBarco/weeeDisposal of batteries in the productThis product contains batteries covered by the Directive 2006/66/EC which must be collected and disposed of separatelyfrom municipal waste.If the battery contains more than the specified values of lead (Pb), mercury (Hg) or cadmium (Cd), these chemical symbols willappear below the crossed-out wheeled bin symbol.By participating in separate collection of batteries, you will help to ensure proper disposal and to prevent potential negative effectson the environment and human health.5.2 Rohs complianceTurkey RoHS complianceTürkiye Cumhuriyeti: AEEE Yönetmeliğine Uygundur.[Republic of Turkey: In conformity with the WEEE Regulation]中国大陆RoHS – Chinese Mainland RoHS根据中国大陆《电子信息产品污染控制管理办法》（也称为中国大陆RoHS）， 以下部分列出了Barco产品中可能包含的有毒和/或有害物质的名称和含量。中国大陆RoHS指令包含在中国信息产业部MCV标准：“电子信息产品中有毒物质的限量要求”中。According to the “China Administration on Control of Pollution Caused by Electronic Information Products” (Also called RoHS ofChinese Mainland), the table below lists the names and contents of toxic and/or hazardous substances that Barco’s product maycontain. The RoHS of Chinese Mainland is included in the MCV standard of the Ministry of Information Industry of China, in thesection “Limit Requirements of toxic substances in Electronic Information Products”.零件项目(名称)Component Name有毒有害物质或元素Hazardous Substances or Elements铅(Pb)汞(Hg)镉(Cd)六价铬(Cr6+)多溴联苯(PBB)多溴二苯醚(PBDE)印制电路配件Printed CircuitAssembliesx0x000电(线)缆Cablesx0x000R5900001 CLICKSHARE 20/10/2015 31
5. Environmental information底架Chassisx0x000电源供应器Power Supply Unitx0x000文件说明书Paper Manuals000000O: 表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T 11363-2006 标准规定的限量要求以下.O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below thelimit requirement in SJ/T11363-2006.X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T 11363-2006 标准规定的限量要求.X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part isabove the limit requirement in SJ/T11363 2006.在中国大陆销售的相应电子信息产品（EIP）都必须遵照中国大陆《电子信息产品污染控制标识要求》标准贴上环保使用期限（EFUP）标签。Barco产品所采用的EFUP标签（请参阅实例，徽标内部的编号使用于制定产品）基于中国大陆的《电子信息产品环保使用期限通则》标准。All Electronic Information Products (EIP) that are sold within Chinese Mainland must comply with the “Electronic Information ProductsPollution Control Labeling Standard” of Chinese Mainland, marked with the Environmental Friendly Use Period (EFUP) logo. Thenumber inside the EFUP logo that Barco uses (please refer to the photo) is based on the “Standard of Electronic Information ProductsEnvironmental Friendly Use Period” of Chinese Mainland.Image 5-15.3 Production addressFactory捷普科技(上海)有限公司上海市田林路600号邮编：200233Made in informationThe made in country is indicated on the product ID label on the product itself.Production dateThe month and year of production is indicated on the product ID label on the product itself.5.4 Importers contact informationContactTo find your local importer, contact Barco directly or one of Barco’s regional offices via the contact information given on Barco’s website, www.barco.com.32 R5900001 CLICKSHARE 20/10/2015
IndexINDEXAAbout 3, 5–6, 8–9Base Unit 6ClickShare 5ClickShare product 5The Button 8Tray 9User Guide 3About ClickShare 3About the Tray 9Address 32Advanced use 15Audio control 23BBase Unit 6Basic information 3Basic Troubleshooting 29Basic use 12Button 8, 25Pairing 25Button menu 20–21Capture more 20Detailed 20Fast 20Shared desktop 21Extended 21Primary 21CCapture more 20Detailed 20Fast 20Client software 19EEnvironmental information 31Disposal information 31Rohs compliance 31FFull screen 15GGetting started 12, 17–18iOS device 18Screen mirroring 18iOS device connection 17Getting Started 11IImporter 32Introduction 3–5ClickShare 5Fonts 4symbols 4User Guide 3iOS device 17–18Screen mirroring 18LLed ring 8LED strips 6MMobile Device 9Support 9PPairing Buttons 25Power off 11Power on 11Problem solving 29Production 32RRegional versions 3SShared desktop 21Extended 21Primary 21Standby button 6Standby mode 11Symbols 4TTroubleshooting 29UUser Interface 19VVersions 3R5900001 CLICKSHARE 20/10/2015 33

Navigation menu