Bazooka BTA10250D 204BTA1025 User Manual To The 30f0eeb5 4012 4f61 9dd1 6894ef5ebb78

User Manual: Bazooka BTA10250D to the manual

Open the PDF directly: View PDF .
Page Count: 20

Download
Open PDF In Browser	View PDF

Dear Friend,
Thank you for selecting Bazooka® subwoofer speaker systems for your
stereo system. Today, the Bazooka represents Bazooka Mobile Audio's
continued commitment to efficiency and design. An innovative
manufacturing process developed by SAS® for the Bazooka provides
consumers with state-of-the-art speaker system design.
At SAS, we take pride in manufacturing the most revolutionary bass speaker
systems ever created, featuring our patented Bass Tubes® enclosure design,
and we hope you will take pride in owning them.
Several years ago, we realized that efficiency was the wave of the future
in Autosound, so we made a commitment to design, manufacture, and
deliver the most efficient speaker systems possible.
Today we market our patented speaker systems worldwide and the high
quality of the Bazooka brand is well respected by consumers and dealers
of all nationalities.
When properly installed, Bazooka subwoofer speaker systems will give
you years of clean uninterrupted sound reproduction. Therefore, I urge
you to take a few minutes of your time to review this instruction booklet.
It was designed to give you a better understanding of our products and
to explain how to apply them properly.
Thank you again for choosing Bazookas. Our early commitment to quality
has made them the product of choice, and I am sure you will agree that
you have made the right one! Enjoy!

Sincerely,

JON C. JORDAN
President
SAS/BAZOOKA

2

CONTENTS
HELPFUL HINTS BEFORE YOU BEGIN

PG4

VEHICLE PLACEMENT RECOMMENDATIONS

PG 5-6

MOUNTING THE BAZOOKA

PG 7-9

WIRING DIAGRAMS

PG 10

SPECIFICATIONS

PG11-12

FEATURES

PG 13 -14

ADJUSTING CROSSOVER/SETTING LEVEL

PG 15

USING REMOTE CONTROL
TROUBLESHOOTING

PG 16-17

WARRANTY

PG 18-19

3

HELPFUL HINTS-BEFORE YOU BEGIN

Please take time to read through this manual and plan out your
installation before you begin!
Locate an area in the rear of the vehicle where you would like to place
the Bazooka speaker systems. The location you have selected must
meet the following requirements in order for the Bazooka to be properly
installed in the vehicle:
1) The woofer (grill end) should be facing into a corner. (See
vehicle placement recommendations on pg. 5-6)
2) Ideally, there should be 2 to 4 inches between the woofer and
the corner it is pointing into.
3) The mounting area should be carefully checked to be sure
that the mounting screws will not damage the gas tank,
electrical wiring, fuel lines, or the spare tire during the mounting
of the strap bases.
4) The strap mounting bases should be screwed securely to a
rigid surface that is part of, or anchored to, the structure of
the vehicle.

4

VEHICLE PLACEMENT RECOMMENDATIONS

TRUCK INSTALLATION
tube size is exaggerated for emphasis

HATCHBACK INSTALLATION
tube size is exaggerated for emphasis

SEDAN INSTALLATION
tube size is exaggerated for emphasis

5

BOAT PLACEMENT RECOMMENDATIONS

BOW RIDERISKI BOAT

tube size is exaggerated for emphasis

• Under passenger console
• Under seat storage compartment

SPORTYAOIT

tube size is exaggerated for emphasis

• Under bed storage compartment
• Under seat storage compartment

6

OU

G THE BAZOO

Figure 1

Logo
should
face up

1. With the topside of the buckle facing up (see figure 1), lace the strap
through the mounting base as illustrated in figure 2

qil

Figure 2

<:

C

~~

2. After the strap is completely laced through the mounting base, make
a loop with the strap, where it runs across the middle of the base as
illustrated in figure 3. This loop is necessary to access the two mounting
holes in the base.

7

Figure 4
3. Place each mounting base under the Bass Tubes® enclosure so that
the apex at the bottom of the tube sits inside the mounting base as
in figure 4.

------------------------7
/

I \
I
I --,

I

I

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

~I

-

II

1\

"

"

I

I

I

I

I

I

I
I
I

I
I
I

j

I

I

t
\

\

I
I

I
I

I
,

I

,

I

I

I

I

\

I

I
~

I
I

I
I

I
\

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

,

I
\

,

\\

I

r

/

I

f

I
\

I

~~_~I

Figure 5

4. Move the bases so that they are spaced approximately 3" from each
end of the enclosure as illustrated in figure 5.
5. Remove the Bass Tubes® enclosure without moving the mounting
bases and set it aside.
6. Screw each mounting base securely in place with screws provided
as illustrated in figure 3.

8

See Model Size

I.. For Lengt .1

7. Remove any slack in the strap by feeding it out of the mounting
base on the loose end of the strap opposite the buckle.
8. Place the Bass Tubes® enclosure on the mounting bases and fasten
the buckles as illustrated in figure 7. The strap should loop through
the buckle and be tightened securely by holding the strap in place with
one hand and pulling the loose end away from the buckle, but against
the cabinet.

Model
6"

Length

8"
10"

22"
27"
32"

12"

17"

Figure 7

Technical

ote:

Due to the jarring and shifting that can occur in a vehicle, the mounting
straps may stretch or loosen. We recommend that you check the straps
regularly to assure that your Bass Tubes® enclosure is mounted securely
in place.

9

BTA6250D/8250D/10250D
8250D-DE/10250D-DE
WIRING DIAGRAM

OTE ONE:
BTA6250D:fuse 20A
BTA8250D/8250D-DE/1 0250D/1 0250D-DE:fuse 30A

10

ENGLISH

NOTE ONE:
BTA8250D-DE/10250D-DE: fuse 30A

AMPLIFIED TUBE SPECIFICATIONS
BTA6250D

6.5

Woofer Size
Voice Coil Size
Magnet Size
Frequency response*
Effiden
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Mode                       : UseOutlines
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Modify Date                     : 2009:01:25 11:58:35-05:00
Create Date                     : 2009:01:25 11:34:39-05:00
Metadata Date                   : 2009:01:25 11:58:35-05:00
Creator Tool                    : Adobe Acrobat 8.13
Format                          : application/pdf
Creator                         : techscan
Title                           : 204BTA1025
Document ID                     : uuid:c08d3c1c-7a5b-4616-b68f-ba6f0a13fc14
Instance ID                     : uuid:be76ea03-2cb7-4362-84ef-547e2c0a50ca
Producer                        : Adobe Acrobat 8.13 Paper Capture Plug-in
Page Count                      : 20
Page Layout                     : SinglePage
Author                          : techscan

EXIF Metadata provided by EXIF.tools