Beacon Display Technology LCDCL1980ET LCD Monitor User Manual CL1980GT ET 1
Shenzhen Beacon Display Technology Co., Ltd. LCD Monitor CL1980GT ET 1
User Manual
User Manual LCD Monitor Model: CL1980GT/ET REV: A0 0621980706 TABLE OF CONTENTS 1. SAFETY SYMBOLS & PRECAUTIONS .............................................................................. 3 1.1. SAFETY SYMBOLS......................................................................................................... 3 FCC Warning:................................................................................................................................................. 3 1.2. PRECAUTIONS ................................................................................................................ 4 2. INTRODUCTION......................................................................................................................... 7 2.1. Features ............................................................................................................................. 7 2.2. Package Contents......................................................................................................... 7 3. CABLE CONNECTION............................................................................................................... 8 3.1. Before Connecting ....................................................................................................... 8 3.2. Connecting the Cables............................................................................................... 8 4. ADJUSTMENT .............................................................................................................................. 9 4.1. How to Use OSD Menu............................................................................................... 9 4.2. OSD MENU Adjustments and Settings ........................................................... 10 4.3. Screen Adjustment.................................................................................................... 10 5. TROUBLESHOOTING ..............................................................................................................11 6. CLEANING ................................................................................................................................... 12 7. SPECIFICATION ...................................................................................................................... 13 7.1. Specification.................................................................................................................. 13 7.2. DVI(Digital Visual Interface) Connector...................................................... 14 7.3. D-Sub 15pin Connector........................................................................................... 14 7.4. Preset Timing ............................................................................................................... 14 8. CAVEAT EMPTOR/GUARANTEE EXCLUSION ........................................................... 15 1. SAFETY SYMBOLS & PRECAUTIONS 1.1. SAFETY SYMBOLS This manual uses the safety symbols below. They denote critical information. Please read them carefully. WARNING Failure to abide by the information in a WARNING may result in serious injury and can be life threatening. CAUTION Failure to abide by the information in a CAUTION may result in moderate injury and/or property or product damage. Alert electrical hazard. Indicates a prohibited action. Indicates to ground for safety. FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. 1.2. PRECAUTIONS To ensure personal safety and proper maintenance, please read this section and the caution statements on the unit WARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediately and contact your dealer for advice. Attempting to use a malfunctioning unit may result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Opening the cabinet or modifying the unit may result in fire, electric shock, or burn. Refer all servicing to qualified service personnel. Do not attempt to service this product yourself as opening or removing covers may result in fire, electric shock, or equipment damage. Keep small objects or liquids away from the unit. Small objects accidentally falling through the ventilation slots into the cabinet or spillage into the cabinet may result in fire, electric shock, or equipment damage. If an object or liquid falls/spills into the cabinet, unplug the unit immediately. Have the unit checked by a qualified service engineer before using it again. Set the unit in an appropriate location. Not doing so may result in fire, electric shock, or equipment damage. - Do not place outdoors. - Do not place in the transportation system (ship, aircraft, trains, automobiles, etc. - Do not place in a dusty or humid environment. - Do not place in a location where the steam comes directly on the screen. - Do not place near heat generating devices or a humidifier. - Do not place in an inflammable gas environment. To avoid danger of suffocation, keep the plastic packing bags away from babies and children. Use the enclosed power cord and connect to the standard power outlet of your country. Be sure to remain within the rated voltage of the power cord. Not doing so may result in fire or electric shock. To disconnect the power cord, grasp the plug firmly and pull. Tugging on the cord may damage and result in fire or electric shock. The equipment must be connected to a grounded main outlet. Not doing so may result in fire or electric shock. Use the correct voltage. - The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. - Do not overload your power circuit, as this may result in fire or electric shock. Handle the power cord with care. - The unit is designed for use with a specific voltage only. Connection to another voltage than specified in this User’s Manual may cause fire, electric shock, or equipment damage. - Do not overload your power circuit, as this may result in fire or electric shock. Never touch the plug and power cord if it begins to thunder. Touching them may result in electric shock. Do not touch a damaged LCD panel directly with bare hands. The liquid crystal that may leak from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly. If some physical symptoms result, please consult your doctor. Follow local regulation or laws for safe disposal. CAUTION Handle with care when carrying the unit. Disconnect the power cord and signal cables and remove the optional unit. Moving the unit with the cord or the option attached is dangerous. It may result in injury. When handling the unit, grip the bottom of the unit firmly with both hands ensuring the panel faces outward before lifting. Dropping the unit may result in injury or equipment damage. Do not block the ventilation slots on the cabinet. - Do not place any objects on the ventilation slots. - Do not install the unit in a closed space. - Do not use the unit laid down or upside down. - Blocking the ventilation slots prevents proper airflow and may result in fire, electric shock, or equipment damage. Do not touch the plug with wet hands. Doing so may result in electric shock. Use an easily accessible power outlet. This will ensure that you can disconnect the power quickly in case of a problem. Periodically clean the area around the plug. Dust, water, or oil on the plug may result in fire. Unplug the unit before cleaning it. Cleaning the unit while it is plugged into a power outlet may result in electric shock. If you plan to leave the unit unused for an extended period, disconnect the power cord from the wall socket after turning off the power switch for the safety and the power conservation. LCD PANEL When the monitor is cold and brought into a room or the room temperature goes up quickly, dew condensation may occur inside and outside the monitor. In that case, do not turn the monitor on and wait until dew condensation disappears, otherwise it may cause some damages to it. In order to suppress the luminosity change by long-term use and to maintain the stable luminosity, please use the monitor with the lower brightness. The screen may have defective pixels. These pixels may appear as slightly light or dark area on the screen. This is due to the characteristics of the panel itself, and not the product. The backlight of the LCD panel has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer. Do not press on the panel or edge of the frame strongly, as this may result in damage to the screen. There will be prints left on the screen if the pressed image is dark or black. If pressure is repeatedly applied to the screen, it may deteriorate or damage your LCD panel. Leave the screen white to decrease the prints. Do not scratch or press on the panel with any sharp objects, such as a pencil or pen as this may result in damage to the panel. Do not attempt to brush with tissues as this may scratch the LCD panel. When the screen image is changed after displaying the same image for extended periods of time, an afterimage may appear. Use the screen saver or timer to avoid displaying the same image for extended periods of time. 2. INTRODUCTION Thank you very much for choosing this monitor. 2.1. Features VGA analog input DVI digital input compliant Resolutions up to 1280x1024. Power management system conforms to VESA DPMS standard. Supports DDC1/2B for Plug & Play compatibility. Advanced On Screen Display (OSD) control for picture quality adjustment 2.2. Package Contents Please contact your local dealer for assistance if any of the listed items are missing or damaged. - LCD Monitor - D-sub Cable - DVI Cable - Power Cable - USB Cable - User Manual Note: Please retain the packing materials for future transference. 3. CABLE CONNECTION 3.1. Before Connecting Before connecting your monitor to the computer, change the display screen settings (Resolution and frequency) in accordance with the charts below. Note: - The lower display modes like 640x480, automatically enlarge to the maximum display mode (1280x1024), and some lines of the characters may become fuzzy. - When your computer and display support VESA DDC, the suitable resolution and the refresh rate are set by just plugging your display into the computer without any manual settings. 3.2. Connecting the Cables Note: Be sure that the power switches of both the computer and the monitor are OFF. DVI D-SUB USB AC IN USB cable connection: Plug the USB cable to the USB connector in the rear of the PC system, and plug the other end to the monitor; DVI cable connection: Plug the DVI signal cable to the DVI connector in the rear of the PC system, and plug the other end to the monitor. Secure cable connectors with screws. VGA cable connection: Plug 15-pin VGA signal cable to the VGA connector in the rear of the PC system, and plug the other end to the monitor. Secure cable connectors with screws. Power cable connection: 1. Connect the power cord to the AC input on the rear of the monitor. 2. Plug the power cord into the AC Plug, and plug the other end of the cord into a power outlet 4. ADJUSTMENT This monitor will not likely require adjustment. Variations in video output and application may require adjustments to the monitor to optimize the quality of the display. For best performance, the monitor should be operating in native resolution 1920 x 1080. Use the Display control panel in Windows to choose 1920 x 1080 resolution. Operating in other resolutions will degrade video performance. All control adjustments are automatically memorized. 4.1. How to Use OSD Menu (1) Auto (Auto adjustment or exit OSD menu) (2) (3) (Down or Increase value) (Up or Decrease value) (4) Menu (Activate OSD menu) Power indicator LED Green Orange Off (5) Power (Power on/off) (6) Power indicator LED Operating Closed Power Off 1. Entering the OSD Menu Press the MENU Button once to display the OSD Menu. 2. Making Adjustments and Settings a. Select the desired sub menu icon using the Control buttons and press the MENU button. The sub menu appears. b. Use the Control buttons to select the desired setting icon and press the MENU button. The setting menu appears. c. Use the Control buttons to make all required adjustments and press the MENU button to save the settings. 3. Exiting the OSD MENU - To return to the main menu,select theicon and press MENU button - To exit the OSD menu, Press button. 4.2. OSD MENU Adjustments and Settings The following table shows all adjustment and setting menus. Main Menu Sub Menu Reference Gamma 1 Gamma Gamma 2 Gamma 3 Gamma 4 Gamma 5 Choose suitable mode according to different application Gamma 6 Gamma 7 9300 Color Temp Language Signal 6500 User English Chinese D-SUB DVI Default Choose suitable color temp according to different application Select display language Select input Signal Reset to the default value Auto Adjust Exit Colse the OSD menu 4.3. Screen Adjustment Screen adjustments for the monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There is only one correct position for each display mode. It is also recommended to use the OSD Menu function when first installing the display or whenever changing the system. Note: Allow the monitor to stabilize for at least 20 minutes before making image adjustments. Making adjustment must be VGA signal. Adjustment Procedure 1. Adjust by menu in the OSD Menu or using shortcut key “AUTO”with 3 seconds To automatically adjust the clock, phase, screen position. Making adjustment must be VGA signal. Note: The Auto sizing function is intended for use on the computer running Windows. It may not work properly when the computer is running on MS-DOS (Not windows) or the background color for the "wall paper" or "desktop" pattern is set to black. 10 5. TROUBLESHOOTING If a problem persists even after applying the suggested remedies, contact a dealer. Problems Points to check with Possible Solutions 1. No picture Check that the power cord is correctly connected. If the Indicator status: Off problem persists, turn off the monitor power for a few minutes, then turn it back on and try again. - when the signal is not inputted correctly, even if the monitor functions properly. - When the image is displayed correctly after a short time, there is no problem with the monitor. (Some PCs do not output the signal soon after powering on.) Check that the signal cable is properly connected to the PC or graphics board. Indicator status: Green Check the "Brightness" setting. 2. Display position is incorrect. Adjust the image position or decrease the horizontal or vertical bars using the menu. If the problem persists, use the graphics board's utility software to change the display position if available. 3.Vertical bars of distortion appear. 4.Horizontal bars of distortion appear. 5. The screen is bright or too dark. too 6. Afterimages appear. Adjust the (The backlight of the LCD monitor has a fixed life span. When the screen becomes dark or begins to flicker, please contact your dealer.) - Use the screen saver or timer when displaying the same image for extended periods of time. - Afterimages are particular to LCD monitors. Avoid displaying the same image for extended periods of time. 7.The screen has defective pixels (e.g. slightly light or dark). This is due to the characteristics of the panel itself, and not the LCD product. 11 6. CLEANING Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. Note: Never use thinner, benzene, alcohol (ethanol, methanol, or isopropyl alcohol), abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the manual of the PC.) LCD Panel The LCD surface can be cleaned with a soft cloth, such as cotton or lens paper. If necessary, stubborn stains can be removed by moistening part of a cloth with water to enhance its cleaning power. 12 7. SPECIFICATION 7.1. Specification Display characteristics Size: Supported color : Native resolution: Pixel pitch: Viewing angle: Brightness: Contrast ratio: Response time: Physical specifications Standard mounting: Power supply: Power consumption: Power saving: Operating temperature: Storage temperature: Relative humidity: MTBF External connections Digital signal: Analog signal 376.32(H)x301.056(V)active display 16.7M colors 1280x1024 0.294mm x 0.294mm 178°, V/H @ (CR=10) 300cd/㎡ Typ 1300:1Typ. 8 ms Typ. VESA compatible(100 mm spacing) DC 12V 6V 48W max. EPA,VESA compliant 0°to 40°C -20°to 65°C 5% to 90%,non condensing >50,000 hours(excluding backlight) DVI-D D-Sub 15 PIN 13 7.2. DVI(Digital Visual Interface) Connector Pin Signal Description Pin Signal 10 11 12 Channel 2 Data Channel 2 Data + Channels 2 and 4 Shield NC NC DDC Clock DDC Data (bidirectional) NC Channel 1 Data Channel 1 Data + Channels 1 and 3 Shield NC 13 14 15 16 17 18 19 20 21 22 23 24 Pin Code Analogue Function Pin Code Analogue Function C1 R NC C4 HSYNC NC C2 G NC C5 ANL_GND Ground C3 B NC TX2TX2+ SHLD2/4 TX4TX4+ SCL SDA VSYNC TX1TX1+ SHLD1/3 TX3- Description TX3+ NC +5V +5 V from input 5V_GND Ground for +5 V HPD Hot Plug Detection TX0Channel 0 Data TX0+ Channel 0 Data + SHLD0/5 Channels 0 and 5 Shield TX5NC TX5+ NC SCL_GND DDC Clock Ground TXC+ Clock + TXCClock - Note: This connector only supports the DVI-D signal. 7.3. D-Sub 15pin Connector Pin Signal Red video Green video Blue video Ground GND Pin 10 Signal Red ground Green ground Blue ground 5V Ground Shorted Pin 11 12 13 14 15 Signal Ground Shorted Data (SDA) H. Sync V. Sync Clock (SCL) 7.4. Preset Timing Mode Pixel Clk MHz polarity Frequency FH FV (kHz) (Hz) VGA 640 x 480 25.2 31.5 60.0 VESA 800 x 600 40.000 37.9 60.3 VESA 1024 x 768 65.000 48.4 60.0 VESA 1280 x 1024 108.000 64.0 60.0 14 8. CAVEAT EMPTOR/GUARANTEE EXCLUSION Claims for defects do not exist in the following cases: - Natural wear and tear, and any damage, errors, reduced output or changes in the condition or function of our products that are due to external factors (e.g. blows, knocks, vibrations, water, fire), or due to improper storage, handling, assembly or any other improper use, or due to extreme climatic conditions, or to particular reception or operating conditions at the location where the item is used; - Defects due to constructional errors or material defects, insofar as the customer has prescribed the construction or the material; - Burn-in on the LCD panel caused by permanent display and spots forming on the LCD panel 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : Yes XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0 (Windows) Create Date : 2012:09:25 10:17:07+08:00 Creator Tool : PScript5.dll Version 5.2 Modify Date : 2012:09:25 10:17:07+08:00 Format : application/pdf Creator : junexie Title : Microsoft Word - CL1980GT ET手册1.doc Document ID : uuid:936d2b40-f2e7-4177-b5e9-0bcbdb109ca4 Instance ID : uuid:72f13f4f-df98-4bfe-8e58-40b7a76afa6a Page Count : 15 Author : junexieEXIF Metadata provided by EXIF.tools