Beautiful Enterprise AW1RECEIVER Wireless Audio Receiver User Manual

Download:
Mirror Download [FCC.gov]
Document ID	845671
Application ID	qi7HdVXRIuWE9c3s3sMKlg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.79kB (72411 bits)
Date Submitted	2007-09-20 00:00:00
Date Available	2007-09-20 00:00:00
Creation Date	2007-09-05 10:19:22
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2007-09-05 10:19:22
Document Title	User Manual

Packing
Examine the contents of the box for your Wireless Audio USB Kit. The box should contain:
Model No. : AW1
A Sender
A Receiver
Two 3.5mm stereo cables
Wireless Audio USB Kit
A switching power adapter
A user manual
Functional Overview
The appearance of Sender and Receiver are the same except the audio jack symbol marked on the bottom.
Instruction Book Draft
Sender (Bottom View)
Safety Information
Information for Users on Disposal of Old
Equipment
Attention:
This symbol is
only valid in the
European Union.
[Other Countries outside the European Union]
If you wish to dispose of this product, please do so in
accordance with applicable national legislation or
other rules in your country for the treatment of old
electrical and electronic equipment.
[European Union]
This symbol indicates that the electrical
and electronic equipment should not be
disposed as general household waste at
its end-of-life. Instead, the product should
be handed over to the applicable
collection point for the recycling in
accordance with your national legislation.
Receiver (Bottom View)
The symbol with an arrow "going in" represents that
audio is transmitted from an audio player (such as
computer, MP3 player, iPod, etc.) to the Sender.
The symbol with an arrow "going out" represents that
audio is transmitted from the Receiver to a speaker
system.
1. USB Plug
2. LED Indicator
FCC
3. Connect Button
4. Audio Jack
This device complies with Part 15 of the FCC Rules
Operation that is subject to following two conditions:
(1) This device may not cause harmful interference and,
(2) This device must accept any interference received,
including interference that may cause undesired
operation.
By disposing of this product correctly, you will help to
conserve natural resources and will help prevent
potential negative effects on the environment and
human health that could otherwise be caused by
inappropriate waste handling of this product. For more
information about collection point and recycling of
this product, please contact your local municipal
office, your household waste disposal service or the
shop where you purchased the product.
Connection
Caution:
Turn off your audio player and speaker system that you
want to connect to before connection.

 Do not connect the Sender to any audio system through
the USB plug. Use the supplied stereo cable only.

 Connect the switching power adapter only after all
other connections are completed.
B. Listening from your audio player
Warning: Changes or modifications to this unit not
expressly approved by the party responsible for
compliance could void the user authority to operate the
equipment.
1. Connect the USB plug of Sender to a computer.
2. Connect the other end of Sender to your audio
player with the supplied stereo cable.

 The LED indicator blinks at a lower rate on the Sender.
Sender
[Connecting the Sender]
Penalties may be applicable for incorrect disposal of
this waste, in accordance with national legislation.
To
computer
A. Listening from your computer
Introduction
Thank you for purchasing an AW1 Wireless Audio USB
Kit from Audioengine. Your AW1 uses a proprietary
2.4GHz wireless communication system that enables
you to securely establish connection between your
personal computer and speaker system, through
which you can enjoy listening to music files stored
remotely.
Compact in size and easy to setup, the system also
allows connectivity with up to eight receivers, which you
can share and listen to music from different locations.
To audio player
1. Connect the USB plug of Sender to your computer.

 The LED indicator blinks at a lower rate on the Sender.
Supplied cable
Blinking LED
[Connecting the Receiver]
To computer
1. Connect the audio output jack of Receiver to your
speaker system with the supplied cable.
Sender
.1 .
2. Connect the USB plug of Receiver to the supplied
switching power adapter.
.2 .
3. Plug the switching power adapter into a AC power
outlet.

 The LED indicator blinks at a lower rate on the Receiver.
[Listening to the System]
B. If the sound source is from your audio player,
A. If the sound source is from your computer,
1. Turn on your audio player.
2. Select the desired music and press "Play" button.
3. Adjust volume on either your audio player or
speaker system.
To speaker system
Caution: The system cannot play music files at your
computer if an audio player is connected to the Sender.
Supplied
switching Power
Adapter
Supplied cable
Receiver
To AC power outlet
1. Launch "Windows Media Player" or another media
player program.
2. Select your favorite music to play.
3. Adjust volume on either your computer or speaker
system.
[Breaking up the Link]
1. After you finish using the system, unplug the Sender
and Receiver. The pair is disconnected.
Using the Wireless Audio USB Kit
Technical Specifications
[When Connecting to More Receivers]
Caution: Keep far away from any obvious radio frequency
interference sources when using the wireless Audio
USB kit.
Item
The system allows you to connect up to Eight Receivers
at the same time but only one active link can be
established at once.
[Establishing Communication
between the Sender and Receiver]
1. Make sure communications are established between
the Sender and all Receivers from which the audio
can be transmitted.
Note: At least there is one active link established
with one Receiver, remaining other Receivers inactive.
The LED indicators blink at a lower rate on inactive
Receivers.
2. If the active link is not established with the desired
Receiver, hold the CONNECT button on the Sender to
connect with another Receiver. Each time an active
link is established, the LED indicators on the Sender
and Receiver are solid on.
3. Repeat step 2 until the active link is established with
the desired Receiver.
1. Hold the CONNECT button on the Sender for 5
seconds.

 The LED indicator blinks at a faster rate on the Sender.
Blinking LED
Press this
button for
5 seconds
Sender
2. Hold the CONNECT button on the Receiver for 1
second.

 The LED indicator blinks at a faster rate on the Receiver.
Blinking LED
Output level
Condition
Specifications
mV
550
Frequency Reapones
100 Hz
dB
(1 kHz = 0 dB)
10 kHz
dB
THD
0.1
Signal - Noise Ratio
dB
85
L>R
dB
60
R>L
dB
60
>30
Channel Separation
Effective Distance
Receiver
Press this
button for
1 second
Inactive
Receiver
Note:

 During the period of "pair mode", the LED indicators
blink at a faster rate on the Sender and Receiver.

 When an active link is established bewteen the Sender
and Receiver, the LED indicators are solid on.

 The maximum operation distance between the Sender
and Receiver can be up to 30m (No obstacle).
Sender
ve
Acti
link
Solid
Solid
.3 .
.4 .

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Create Date                     : 2007:09:05 10:19:22+08:00
Modify Date                     : 2007:09:05 10:19:22+08:00
Page Count                      : 1
Creation Date                   : 2007:09:05 02:19:22Z
Mod Date                        : 2007:09:05 02:19:22Z
Producer                        : Acrobat Distiller 5.0 (Windows)
Metadata Date                   : 2007:09:05 02:19:22Z

EXIF Metadata provided by EXIF.tools