Beautiful Enterprise LPSAN0006 LIFEPROOF AQ10 User Manual Aquaphonics Website Regulatory and Safety Section rev 2

Beautiful Enterprise Co., Ltd. LIFEPROOF AQ10 Aquaphonics Website Regulatory and Safety Section rev 2

Contents

Aquaphonics Website Regulatory and Safety Section rev 2

Additional Regulatory and Safety Information for Aquaphonics AQ9, AQ10, and AQ11 CARE +MAINTENANCE Cleaning 1. Wipe with a dry cloth. 2. Rinse with fresh water after exposure to soap, chlorine or seawater. 3. Do not use solvents, chemicals, cleaning solutions, alcohol, ammonia or abrasives. Important Safety Instructions 1. Read these instructions 2. Keep these instructions 3. Heed all warnings 4. Follow all instructions 5. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 6. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 7. The MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. (AQ10 + AQ11 only) 8. Only use attachments / accessories specified by the manufacturer. 9. Unplug this apparatus during lightning storms or when unused for long periods of time. 10. Speaker is only waterproof when dry box is closed. Ensure lid is secure before exposing to water (AQ10 + AQ11 only). 11. Information such as model number, electrical rating and other classifications is located on the back of your speaker (AQ9) or on the bottom of your speaker (AQ10 + AQ11). 12. The device contains no user serviceable parts. Do not attempt to disassemble, modify or repair this device. 13. Dispose of this product properly and in accordance to local disposal requirements. Do not dispose in trash or fire. 14. Failure to follow the above warnings may result in damage to persons or property, so please follow all warnings! Water Your speaker is waterproof to 1 meter for 30 minutes. Prolonged exposure is not recommended. Speaker is only waterproof when dry box is closed (AQ10 + AQ11). Drop Your speaker is drop proof to 1.2 meters. After major impacts, inspect for damage, including port cover seals and dry box (AQ10 + AQ11 only). Heat Never expose your speaker to fire, flame or lighted candles. Do not install near heat sources like radiators, heat registers, stoves, amplifiers or other apparatus that produce heat. Battery Do not leave a battery on prolonged charge when not in use. The battery provided with your speaker is not user serviceable. Contact LifeProof Customer Service for all battery related issues. Charging The charger provided is designed for indoor use only. Charge your speaker with the USB cable. Make sure the USB cable is fully inserted into the speaker before plugging other end into USB power source. Repair Never dismantle your speaker. Refer all servicing to qualified service personnel. Servicing is required when your speaker has been damaged in any way. Contact LifeProof Customer Service.
Additional Regulatory and Safety Information for Aquaphonics AQ9, AQ10, and AQ11 Regulatory Information Warning Statements: The device complies with RF specifications when the device used at 5mm form your body. IC statements This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. FCC statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC Radiation Exposure Statement This equipment complies with Canada radiation exposure limits set forth for uncontrolled environments. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. European Declaration of Conformity: Coming soon. Compliance work still underway. Other Certifications: TBD

Navigation menu