Behavior Tech Computer KB5309URF Wireless Keyboard User Manual Manual 5309URF rev 1

Behavior Tech Computer Corporation Wireless Keyboard Manual 5309URF rev 1

Users Manual

Download: Behavior Tech Computer KB5309URF Wireless Keyboard User Manual Manual   5309URF     rev 1
Mirror Download [FCC.gov]Behavior Tech Computer KB5309URF Wireless Keyboard User Manual Manual   5309URF     rev 1
Document ID514855
Application IDV5fb5lc5uXXBQ3pIQKSSsA==
Document DescriptionUsers Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.66kB (220794 bits)
Date Submitted2005-02-11 00:00:00
Date Available2005-02-11 00:00:00
Creation Date2005-02-05 04:02:52
Producing SoftwareAcrobat Distiller 5.0 (Windows)
Document Lastmod2005-02-11 16:08:42
Document TitleMicrosoft Word - Manual - 5309URF_.^__rev 1.doc
Document CreatorPScript5.dll Version 5.2
Document Author: demi

5309URF Quick Installation Guide
Important Information
- For Windows® 98SE operating system, please go to http://www.emprex.com/ website to download and install the
“KeyMaestro Input Device Driver” to have the Internet Keys Block and Multimedia Keys Block functions.
- For Windows® ME, Windows® 2000 and Windows® XP operating system, you could use the wireless kit immediately after
plugging the receiver USB connector into PC USB port.
Hardware Installation
1.
Plug in the receiver connector into your available USB port on PC.
2.
Make sure the batteries of the keyboard and mouse are installed
correctly, please follow the polarity signs in the battery compartment.
Front View of
USB Connector
Back View of
USB Connector
(+ )
Pairing Procedure
(-)
(-)
(+ )
The pairing button locates on the top of the receiver with a LED under to
show the pairing or data reception status.
The ID-recognition function helps to protect against interference from other
RF products in the same environment. Remember to pair ID when other RF
1.
Pairing button on
the top of the
receiver (With a
LED under the
pairing button)
ID Button(LED)
products affect your keyboard kit.
Press the pairing button on the top of the receiver first. Receiver LED
will blink slowly indicating it’s ready to receive keyboard/mouse pairing
information.
2.
Next, press the pairing button on the bottom of the mouse once.
3.
Then press the pairing button on the top of the receiver again.
4.
Finally, press the pairing button on the bottom of the keyboard
Pairing button on the
bottom of the mouse
Receiver LED flashes 3 times rapidly as indication it’s paired with this
keyboard and mouse.
Note:
- The whole procedure should be complete within 60 seconds.
- Make sure your PC is on and running when doing the pairing
procedure.
Pairing button on the
bottom of the keyboard
Driver Installation
USB Device Driver
The USB device driver is included in Windows operating system.
During initial installation of the USB device, the system will automatically detect a new hardware being added, and then
bring up "Add New Hardware Wizard" dialogue box. Please follow the Wizard's USB driver installation steps. Once this
installation step is completed the basic functions of the USB device will work under the operating system. The additional
functions are provided only after the KeyMaestro application is installed.
KeyMaestro Input Device Driver
1. After you download the driver, please find the “SetupKey.exe” in the directory and double-click this file.
2. Follow the on-screen instruction to install the driver.
2.
The driver icon
will show at the right-bottom of the Windows system tray when the driver is loaded.
English
5309URF Version 0.9A Preliminary 英文
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment.
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
Information to user:
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user
that changes or modifications not expressly approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
This equipment is intended for use in the following countries EU 18 countries:
Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, Netherlands, Spain,
Sweden, United Kingdom, Portugal, Greece, Switzerland, Norway, and Iceland.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. To maintain compliance with FCC RF exposure compliance requirements, please
avoid direct contact to the transmitting antenna during transmitting.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2005:02:05 04:02:52Z
Modify Date                     : 2005:02:11 16:08:42-07:00
Page Count                      : 2
Creation Date                   : 2005:02:05 04:02:52Z
Mod Date                        : 2005:02:11 16:08:42-07:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : demi
Metadata Date                   : 2005:02:11 16:08:42-07:00
Creator                         : demi
Title                           : Microsoft Word - Manual - 5309URF_.^__rev 1.doc
EXIF Metadata provided by EXIF.tools
FCC ID Filing: E5XKB5309URF

Navigation menu