Behavior Tech Computer KB8280ARF3 Wireless Keyboard User Manual
Behavior Tech Computer Corporation Wireless Keyboard
User manual
Quick Installation Guide (English)
Wireless Keyboard
8280ARF III
BTC ; EMPREX
Hardware Installation
1. Make sure the batteries of the keyboard is installed correctly. Please follow the
polarity signs in the battery compartment.
2. Please make sure the slide switch on the top right of the keyboard is switched to
“on” before using the keyboard. When not in use, please turn the power switch to
“off” for power saving.
3. Plug the receiver directly into your available USB port on PC.
Pairing Procedure
It can operate out of the box immediately after you plu
g
the receiver USB connector
into your PC USB port. If it can’t work, please visit our website to download and install
the “Pairing Tool.”
Receiver Storage Slot
You could have the receiver housed inside the receiver storage slot.
System Requirements
Available USB port
Microsoft® Internet Explorer 6.0 or later version (for the Internet keys)
Microsoft® Windows® 7, Windows® XP or Windows Vista® operating system
ID button
LED Indicator
Power Switch
Receiver Storage Slot
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment.
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, (2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment.
Information to user:
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user that changes or
modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the
equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow
the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Do not litter
310050**** Version 1.0 Nov. 2011 Printed in China