Behavior Tech Computer KB9129URF Wireless Keyboard User Manual 9129URF E revised p3

Download:
Mirror Download [FCC.gov]
Document ID	455544
Application ID	8ny0EyQIudoZ3eze0Bxuiw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	18.18kB (227263 bits)
Date Submitted	2004-08-02 00:00:00
Date Available	2004-08-02 00:00:00
Creation Date	2004-07-30 09:48:08
Producing Software	Acrobat Distiller 5.0 (Windows)
Document Lastmod	2004-07-30 17:48:29
Document Title	Microsoft Word - 9129URF -E_revised p3.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	Andrea

9129URF Wireless Keyboard User’s Guide
Hardware Installation
Step 1: Make sure your PC is switched off.
Step 2: Connect the receiver to your PC by plugging in the receiver’s black
connector into the USB port of your PC .
USB Plug
Step 3: Take the keyboard and make sure the batteries on the back are installed
correctly. (Follow the polarity signs in the battery compartment.)
Bottom View of Keyboard
Remarks:
1. The keyboard uses 4 pcs. standard UM-3 (AA) 1.5V alkaline batteries.
2. Battery life is approximately 3-4 months, depending on the intensity of usage.
3. Make sure the receiver is placed in a location where is relatively free of strong
electromagnetic or transmission sources in order to ensure optimal reception of the
keyboard signal.
ID Setting
This wireless keyboard kits have 255 sets ID in each unit. This extra ID-recognition
function helps to protect against interference from other RF keyboards in the same
environment.
¾
The word CONNECT labels the ID button on each unit.
¾
The LED under ID button of receiver shows connecting condition.
Step 1: Press the ID button on the side of the receiver once.
Step 2: Press the ID button on the bottom of the keyboard once.
ID Button of Keyboard
Remarks:
1.
You must follow the procedure above to set the ID of receiver and keyboard.
Once the receiver ID button is pressed you have 35 seconds to complete the entire
process, or you will need to begin again.
2.
Once the keyboard and receiver are plugged in, the yellow receiver light will flash.
Once the ID is set, it will remain steadily lit.
3.
When changing the batteries of keyboard, there is no need to reset all the ID’s.
Simply reset one of them.
4.
When keyboard batteries are low, a battery low icon
tray.
will show on the system
5.
When mouse batteries are low, a battery low icon
tray.
will show on the system
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
¾
Reorient or relocate the receiving antenna
¾
Increase the separation between the equipment and receiver
¾
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
¾
Consult the dealer or an experienced radio/TV technician for help.
The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulation.
Cet appareil numerique de la class B respecte toutes les exigences du Règlement sur le materiel brouilleur du
Canada.
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference. (2) This device must accept any
interference received, including interference that may cause undesired operation.
This equipment is intended for use in the following countries EU 15 countries:
Austria, Belgium, Denmark, Finland, France, Germany, Ireland, Italy, Luxembourg, Netherlands, Spain,
Sweden, United Kingdom, Portugal, Greece. And other non-EU countries: Switzerland, Norway, and
Iceland.
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate this equipment. Shielded interface cable, if any, must be used in order to comply
with emission limits.
Information to user:
The users manual or instruction manual for an intentional or unintentional radiator shall caution the user
that changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Copy, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2004:07:30 09:48:08Z
Modify Date                     : 2004:07:30 17:48:29+08:00
Page Count                      : 3
Creation Date                   : 2004:07:30 09:48:08Z
Mod Date                        : 2004:07:30 17:48:29+08:00
Producer                        : Acrobat Distiller 5.0 (Windows)
Author                          : Andrea
Metadata Date                   : 2004:07:30 17:48:29+08:00
Creator                         : Andrea
Title                           : Microsoft Word - 9129URF -E_revised p3.doc

EXIF Metadata provided by EXIF.tools