Behavior Tech Computer MSM853P Optical Mouse User Manual

Behavior Tech Computer Corporation Optical Mouse

User manual

Download: Behavior Tech Computer MSM853P Optical Mouse User Manual
Mirror Download [FCC.gov]Behavior Tech Computer MSM853P Optical Mouse User Manual
Document ID859921
Application IDDKhn2B2gIjS0I6QD++h9lQ==
Document DescriptionUser manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize2.72kB (33942 bits)
Date Submitted2007-10-25 00:00:00
Date Available2007-10-25 00:00:00
Creation Date2007-10-25 09:16:02
Producing SoftwareAcrobat PDFWriter 5.0Windows NT ª©
Document Lastmod2007-10-25 09:20:06
Document TitleM870P Installation Guide-E 手冊 1025.doc
Document CreatorM870P Installation Guide-E 手冊 1025 - Microsoft Word
Document Author: andrea.huang

M870P/M871P/M859P/M853P Optical Mouse
Quick Installation Guide
Congratulations on your purchasing this exciting optical mouse. This multi-function optical
mouse is with great features, wheel for quick scrolling and optical sensor for preventing from the
interference caused by dust. All those human-oriented characteristics make you feel more
comfortable and efficient while surfing on the website or using applications. After the KeyMaestro
driver installed, you will have seven extra functions to select for buttons, Quick Jump, Double
Click, Window Zoom, Switch AP, Auto Panning, Back and Forward. Moreover, the Quick Jump
button is bonded with most often-used functions, Mouse Control Panel, Control Panel, Horizontal
Scroll Bar, Vertical Scroll Bar, Minimize All Windows, Size Grip, Windows Explorer, Recall the
Last Active Window and Exit. Please install the KeyMaestro Input Device driver to find more
great functions!
System Requirements
Ø
Microsoft® Windows® NT 4.0, Windows® 95, Windows® 98, Windows® ME,
Windows® 2000 or Windows® XP operating system
Note: For USB model, it is only suitable for Windows® 98, Windows® ME, Windows® 2000 or
Windows® XP operating system
Hardware Installation
Connect the Mouse to Your PC System
1.
Turn off your PC system. Remember to turn off your PC system before you connect or
disconnect the mouse unless you use a USB device in Windows 98, Windows 2000 or
Windows ME.
2.
3.
PS2 Mouse Port
PS/2 model, you can connect the mouse to the PS/2 port.
Turn on your PC system.
Software Installation
1.
2.
3.
4.
5.
Insert the disk labelled “KeyMaestro Input Device Driver” into your disk drive.
Open File Explorer to find “Setup.exe” from the disk.
Double-click the “Setup.exe”.
Then follow the instruction on the screen to install the driver. The default install path is set
to c:\MMaestro. You have the option to change the install path during set-up.
Set up will indicate when installation has successfully completed. The driver is loaded when
you see the driver icon in the system tray (lower right corner of the screen). The
operating system needs to restart.
Note: Before installing the KeyMaestro input device driver for USB optical mouse, you have to make sure
that the USB device driver has been installed and the USB optical mouse is recognized by Windows
operating system. You may press any button to see if it is correspondently, and thus to know the
mouse works well.
1/2
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference. (2) This device must accept any interference received,
including interference that may cause undesired operation.
You are cautioned that changes or modifications not expressly approved by the party responsible for
compliance could void your authority to operate the equipment.
2/2

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V1.2 (40-bit)
User Access                     : Print, Fill forms, Extract, Assemble, Print high-res
Create Date                     : 2007:10:25 09:16:02Z
Modify Date                     : 2007:10:25 09:20:06+08:00
Page Count                      : 2
Creation Date                   : 2007:10:25 09:16:02Z
Author                          : andrea.huang
Producer                        : Acrobat PDFWriter 5.0Windows NT ª©
Mod Date                        : 2007:10:25 09:20:06+08:00
Metadata Date                   : 2007:10:25 09:20:06+08:00
Title                           : M870P Installation Guide-E 手冊 1025.doc
Creator                         : andrea.huang
EXIF Metadata provided by EXIF.tools
FCC ID Filing: E5XMSM853P

Navigation menu