Behavior Tech Computer RXNANO Wireless USB Dongle User Manual Quick Installation Guide

Download:
Mirror Download [FCC.gov]
Document ID	1185408
Application ID	UF5BW5tzawcAEwmt2ICwXQ==
Document Description	User manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	6.32kB (78962 bits)
Date Submitted	2009-10-19 00:00:00
Date Available	2009-10-19 00:00:00
Creation Date	2009-10-19 17:05:10
Producing Software	Acrobat Distiller 6.0.1 (Windows)
Document Lastmod	2009-10-19 17:05:24
Document Title	Quick Installation Guide
Document Creator	Acrobat PDFMaker 6.0 for Word
Document Author:	Gloria

Wireless USB Dongle
NANO Dongle / EMPREX,BTC
Quick Installation Guide
-For Windows® 2000 operating system, please go to http://www.emprex.com/ website to download and install the “KeyMaestro Input Device Driver”
to have the Multimedia Player functions.
-For Windows® XP and Windows Vista® operating systems, you could use the keyboard immediately after plugging the keyboard connector into the
PC. If you want to enjoy the full functionality of the keyboard, please visit our website at http://www.emprex.com/ to download and install the
“KeyMaestro Input Device Driver.” Once the driver has been installed, these hot keys are reprogrammable. They can be configured as a string, a
combination key, a web site, an existing file, or a function that the driver pre-defines for you.
1. Make sure the batteries of the keyboard and mouse are installed correctly. Please follow the polarity signs in
the battery compartment.
Front view of
Back view of receiver
receiver
1.
2. Please make sure the slide switch on the back of the mouse is switched to “on”
before using the mouse. When not in use, please
turn the power switch to “off” for power saving.
2.
3. Plug the receiver directly into your available USB port on PC.
3.
4.
Please hold the keyboard and mouse close to the receiver within 30 cm and press any key to pair ID, and then you can use
the wireless kit immediately.
Change the cursor pointer speed
You can modify the mouse pointer speed settings in the control panel.
1.
1. Open the Start Menu by clicking “Start” at the lower-left corner on the screen
2.
2. Then click on Settings / Control Panel / Mouse
3.
3. In the Mouse Properties window that appears, click the Motion tab
4.
4. Move the slide bar toward either the faster end or the slower end
5.
5. Click OK to exit and make the change effective
Please follow the hardware installation procedure mentioned above to install the wireless kit, and then you can use the wireless kit immediately. If it
can’t work, please Pairing/connect button on top follow the steps below to process ID setting of the wireless kit. of the receiver (With a LED
1.
1. Press the ID pairing/connect button on the top of the receiver at least 2 seconds indicator under the pairing/ until the receiver LED flashes.
The receiver LED will flash 60 seconds to wait for connect button) keyboard and mouse pairing information. (If you release the button within 2 seconds,
the ID pairing will fail.)
2.
2. Next, hold the keyboard and press the ID pairing/connect button on the bottom of the keyboard at least 2 seconds until the LED
indicator on the upper right of the keyboard flashes once. (If you release the button within 2 seconds, the ID pairing will fail.)
3.
3. Then, press the ID pairing/connect button on the top of the receiver as step 1.
the mouse at least 2 seconds until
4.
4. Finally, hold the mouse and press the ID pairing/connect button on the bottom of
Pairing/connect button on the
the LED indicator flashes once. (If you release bottom of the keyboard the button within 2 seconds, the ID pairing will fail.)
Note:
- When doing the pairing procedure, please hold the keyboard or mouse close to
Power Switch
the dongle receiver within 30 cm. -Each procedure should be completed within 60 seconds. -Make sure your PC is on and running when doing
ID pairing button /
the pairing procedure.
-You don’t have to pair ID again after changing batteries.
freely up to a radius of about 10m
connect button
-Both the keyboard and mouse can operate
from the receiver.
Pairing/ connect button on the
-Keyboard battery life is up to 15 months and mouse battery life is up to 6 months. It
bottom of the mouse
Available USB port
CD-ROM drive (for CD and Video operation)
Standard sound card (for CD and Video operation)
Microsoft® Internet Explorer 5.0 or later version (for the Internet keys)
Microsoft® Windows® 2000, Windows® XP or Windows Vista® operating system
The system supports ACPI or APM II (for power management buttons)
depends on the intensity of usage.
Wireless USB Dongle
NANO Dongle / EMPREX,BTC
ATX mother board and ATX power supply (for power management buttons)
USB Device Driver
The USB device driver is included with your Windows operating system. During the initial installation of the keyboard USB device, the system will
automatically detect that a new hardware device has been added and will bring up the "Add New Hardware Wizard" dialogue box. Follow the
Wizard's USB driver installation steps. Once this installation step is completed, the basic functions of the USB device will work under the operating
system. The additional functions are provided only after the KeyMaestro driver is installed.
1.
2.
3.
KeyMaestro Input Device Driver
1. After you download the driver, please find the “SetupKey.exe” in the directory and double-click this file.
2. Follow the on-screen instructions to install the driver.
3. The driver icon
will show at the bottom right of the Windows system tray when the driver is loaded.
English
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Use only shielded cables to connect I/O devices to this equipment.
FCC Warning: This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, (2) this device must
accept any interference received, including interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
Information to user:
The users manual or instruction manual for an intentional or unintentional radiator shall caution
the user that changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. End users
must follow the specific operating instructions for satisfying RF exposure compliance.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Page Count                      : 2
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:6996d142-343d-4672-a846-037832d1aa0d
Producer                        : Acrobat Distiller 6.0.1 (Windows)
Source Modified                 : D:20091019090502
Headline                        : 
Create Date                     : 2009:10:19 17:05:10+08:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2009:10:19 17:05:24+08:00
Metadata Date                   : 2009:10:19 17:05:24+08:00
Document ID                     : uuid:4d278898-c7fb-45da-b7b8-e02fe8277312
Version ID                      : 3
Format                          : application/pdf
Title                           : Quick Installation Guide
Creator                         : Gloria
Subject                         : 
Tagged PDF                      : Yes
Author                          : Gloria

EXIF Metadata provided by EXIF.tools