Behringer Bass Amp Er Direct Recording Preamp Di Box Bdi21 Users Manual V TONE DRIVER
Behringer-V-Tone-Bass-Driver-Di-Bdi21-Users-Manual-753167 behringer-v-tone-bass-driver-di-bdi21-users-manual-753167
Behringer-V-Tone-Bass-Driver-Di-Bdi21-Owners-Manual behringer-v-tone-bass-driver-di-bdi21-owners-manual
BDI21 to the manual 8fbe921d-851f-47db-a43a-1b04e3874567
2015-02-04
: Behringer Behringer-Bass-Amp-er-Direct-Recording-Preamp-Di-Box-Bdi21-Users-Manual-362877 behringer-bass-amp-er-direct-recording-preamp-di-box-bdi21-users-manual-362877 behringer pdf
Open the PDF directly: View PDF .
Page Count: 2
![](asset-1.png)
V-TONE BASS DRIVER DI BDI21
Bass Amp Modeler/Direct Recording Preamp/DI Box
Thank you for showing your condence in us by purchasing the V-TONE BASS BDI21.
This high-quality bass driver is designed for bassists with diverse and
wide-ranging needs. The integrated tube emulation produces the sound and
response of a miked bass tube amp while the 2-band EQ (with presence control)
and the dedicated drive control let you create any bass tone you desire,
from vintage to modern. In addition, the BDI21 functions as a standard
ultra-transparent direct injection box when used in bypass mode.
A DI (Direct Injection) box allows you to send a signal directly from an unbalanced,
high-impedance output (like a bass guitar) and connect it directly to the balanced
mic input of a mixing console.
Whether for stage, recording, rehearsal or warm-up, the BEHRINGER V-TONE BASS
BDI21 is a natural choice for those who are seeking great tone with a simple set-up.
1. Control Elements
Control elements
(1) The DRIVE control adjusts the overall amount of gain and overdrive,
similar to pushing the output section of a tube amp.
(2) The TREBLE control governs the high-frequency range of the signal (±12 dB).
(3) The BASS control allows you to boost/cut the low-frequency range (±12 dB).
(4) The PRESENCE control boosts the upper harmonic content for a smoother
high end and more attack.
(5) The LEVEL control adjusts the output level of the BDI21.
(6) The BLEND control adjusts the amount of tube emulation. The tube
emulation circuitry provides the real tube sound of a miked bass tube amp.
(7) When activated, the GND LIFT disconnects the ground connection between
input and output. Depending on the grounding of the connected equipment,
this can eliminate hum or ground loops.
(8) Use the footswitch to activate/deactivate all the tone functions (EQ, DRIVE,
tube emulation). When deactivated, the BDI21 functions solely as a standard
transparent DI box.
(9) This LED illuminates when the eect is activated (see (8)).
Connectors
(10) Use this ¼" TS INPUT connector to plug in the instrument cable of your bass
guitar or other instruments.
(11) BAL OUT is the BDI21’s balanced mic level output. Use a high-quality,
balanced XLR (microphone) cable to connect the driver to a mixing console.
(12) The unbalanced ¼" TS OUT connector sends the signal to your bass amp.
Bottom of the BDI21
(13) SERIAL NUMBER. The serial number of the BDI21 is located at the bottom.
(14) BATTERY COMPARTMENT. Open the lid to install or replace the 9 V battery.
◊ The BDI21 is powered as soon you insert a plug into the INPUT.
The battery is “disconnected” when the plug is removed. For this
reason, the BDI21 has no on/o switch. To prolong battery life,
always disconnect the input when the driver is not in use.
(15)
Power supply connector
(15) Use the DC IN connection to plug in a 9 V power supply (not included).
(1)
(4) (6)
(8)
(9)
(5)
(2) (3)
(7)
(10) (12)
(11)
(14)
(13)
![](asset-2.png)
V-TONE BASS DRIVER DI BDI21
TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGE WITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE MUSIC GROUP (MUSIC-GROUP.COM).
ALL TRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS WHICH MAY BE SUFFERED BY ANY PERSON WHO RELIES EITHER WHOLLY OR IN
PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN. COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED
FULLFILLERS AND RESELLERS ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR IMPLIED UNDERTAKING
OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING
AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUT THE EXPRESS WRITTEN PERMISSION OF MUSICGROUPIPLTD. ALL RIGHTS RESERVED. © 2012 MUSICGroupIPLtd. Trident Chambers,
Wickhams Cay, P.O. Box 146, Road Town, Tortola, British Virgin Islands
2. Safety Instructions
Do not use near water, or install near heat sources. Use only authorized
attachments/accessories. Do not service product yourself. Contact our qualied
servicing personnel for servicing or repairs, especially when power supply cord or
plug is damaged.
3. Warranty
Please register your new BEHRINGER equipment right after your purchase
by visiting http://behringer.com and read the terms and conditions of our
warranty carefully.
4. Specications
Input
Connector ¼" TS
Impedance 1 MΩ
Output
Connector ¼" TS
Impedance 1 kΩ
Balanced output
Connector XLR
Impedance 200 Ω
Power supply 9 V, >50 mA DC regulated
Power connector 2 mm DC jack, negative center
Battery 9 V type 6LR61
Power consumption 25 mA
Dimensions/Weight
Dimensions (H x W x D) approx. 5 x 3 ⁄ x 2"
approx. 127 x 100 x 50 mm
Weight approx. 1.01 lbs / 0.46 kg
BEHRINGER is constantly striving to maintain the highest professional standards. As a result of
these efforts, modifications may be made from time to time to existing products without prior notice.
Specifications and appearance may differ from those listed or illustrated.
5. Sample Settings
FAT TUBE
SVT® STYLE
SLAP
REGGAE
SOLO